• Analytical Science and Technology
• /
• v.16 no.6
• /
• pp.431-437
• /
• 2003

Metalization yield of uranium oxide to uranium metal from lithium reduction process of spent pressurized water reactor (PWR) fuels was measured using thermogravimetric analyzer. A reduced metal produced in the process was divided into a solid and a powder part, and each metalization yield was measured. Metalization yield of the solid part was 90.7~95.9 wt%, and the powder being 77.8~71.5 wt% individually. Oxidation behaviour of the quartemary alloy was investigated to take data on the thermal oxidation stability necessary for the study on dry storage of the reduced metal. At $600{\sim}700^{\circ}C$, weight increments of alloy of Mo, Ru, Rh and Pd was 0.40~0.55 wt%. Phase change on the surface of the alloy was started at $750^{\circ}C$. In particular, Mo was rapidly oxidized and then the alloy lost 0.76~25.22 wt% in weight.

• Transactions of the Korean hydrogen and new energy society
• /
• v.12 no.3
• /
• pp.219-229
• /
• 2001

Hydrogen production by a 2-step water-splitting thermochemical cycle using metal oxides (ferrites) redox pairs and $CH_4$ have been studied in this experiment. The ferrites were reacted with $CH_4$ at $700{\sim}800^{\circ}C$ to produce CO, $H_2$ and various reduced phases (reduction step); these were then reoxidized with water vapor to generate $H_2$ in water-splitting step (oxidation step) at $600{\sim}700^{\circ}C$. The reduced ferrites, Ni-FeO and Ni-Fe alloy showed respectively different reactivity for $H_2$ formation from $H_2O$. In reduction reaction at $800^{\circ}C$, carbon was deposited on surface of Ni-ferrite due to $CH_4$ decomposition. This reduced phase containing carbon, which was taken quite different feature from other phase, produced $H_2$, CO, $CO_2$ by reacting with $H_2O$ at $600^{\circ}C$. The amount of $H_2$ evolved using reduced phase containing carbon was much higher than that of other phase.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.688-690
• /
• 2017

Reduction of breakdown voltage is serious short channel effect (SCE) by shrink of channel length. The SCE occurred in on-state transistor raises limitation of operation range of transistor. The deviation of breakdown voltage for doping concentration is investigated with structural parameters of sub-10 nm double gate (DG) MOSFET in this paper. To analyze this, thermionic and tunneling current are derived from analytical potential distribution, and breakdown voltage is defined as drain voltage when the sum of two currents is $10{\mu}A$. As a result, breakdown voltage increases with increase of doping concentration. Breakdown voltage decreases by reduction of channel length. In order to solve this problem, it is found that silicon and oxide thicknesses should be kept very small. In particular, as contributions of tunneling current increases, breakdown voltage increases.

• Journal of the Korean Chemical Society
• /
• v.37 no.4
• /
• pp.401-407
• /
• 1993

The titanium oxide thin films were prepared by air oxidation and water vapor oxidation. The electrochemical properties of the electrodes were studied in 1M NaOH solution. The peak potentials of oxygen reduction from cyclic voltammogram techniques were observed at aroung -0.9 ∼ -1.0 V vs. SCE and the reaction was totally irreversible process. The electrochemical properties of titanium dioxide electrodes prepared by water vapor oxidation exhibited different from the air oxidized electrodes, but it was similar to single crystal $TiO_2$. The peak potentials of oxygen reduction were observed at slightly more positive than flat band potentials and depended on pH.

• Corrosion Science and Technology
• /
• v.19 no.3
• /
• pp.122-130
• /
• 2020

In this study, a corrosion failure analysis of a heat transport pipe was conducted, as the result of a pinhole leak. Interestingly, the corrosion damage occurred externally in the pipeline, resulting in severe thickness reduction near the seam line. Also, while a stable magnetite protective film formed on the inner surface, the manganese oxide formation occurred only on the outer surface. The interior and exterior of the pipe were composed of ferrite and pearlite. The large manganese sulfide and alumina inclusions were found near the seam line. In addition, the manganese sulfide inclusions resulted in grooving corrosion, which progressed in the seam line leading to the reduction in the thickness, followed by the exposure of the alumina in the matrix to the outer surface. To note, the corrosion was accelerated by pits generated from the boundaries separating the inclusions from the matrix, which resulted in pinhole leaks and water loss.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.1
• /
• pp.59-65
• /
• 2018

Radon gas is a colorless, odorless, tasteless gas that occurs when uranium, a natural radioactive material in rocks and soils, collapses. 85% of the annual radiation exposure of the human body is due to natural radiation, of which 50% is radon. According to the US Environmental Protection Agency (EPA) survey, 62 out of 1,000 smokers and 7 out of 1,000 nonsmokers are exposed to lung cancer when exposed to radon gas for a long time. In order to reduce the risk of radon gas, activate carbon was used to fabricate matrix, and the pore properties and radon reduction properties were investigated. When the activate carbon was used, the radon gas concentration was drastically reduced and the graph was changed as the measurement period became longer. The pore distribution and microporous properties, which are one of the material properties of activate carbon, can be grasped.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.1
• /
• pp.9-15
• /
• 2018

Radon gas, which is present on the earth, is a primary carcinogen released from rocks, soil, building materials, etc., and exists as a unique gas phase. In order to solve the risk of radon gas, we evaluated the basic performance which can be used as indoor finishing materials in addition to the radon gas reduction properties of the matrix using anthracite. An anthracite used as a conventional filter material was used to produce a matrix, and a test was conducted to replace the gypsum board, which is one of the building materials used in the existing room. As the anthracite replacement ratio increases, flexural failure load strength increases and thermal conductivity tends to decrease. Depending on the thickness of the board, the reduction performance of radon gas shows a slight difference.

• Applied Science and Convergence Technology
• /
• v.26 no.6
• /
• pp.218-222
• /
• 2017

This study was conducted to remove $NO_x$, which is the main cause of fine dust and air pollution as well as acid rain. $NO_x$ was tested using 3% NO (diluted in He) as a simulated gas. Experiments were sequentially carried out by oxidizing NO to $NO_2$ and absorbing $NO_2$. Especially, we focused on the changes of NO oxidation according to both oxidant ($NaClO_2$) concentration change (1~10 M) and oxidant pH change (pH = 1~5) by adding HCl. In addition, we tried to suggest a method to improve $NO_2$ absorption by conducting $NO_2$ reduction reaction with reducing agent (NaOH) concentration (40~60%). It was found that NO removal efficiency increased as both concentration of oxidant and flow rate of NO gas increased, and NO decreased more effectively as the pH of hydrochloric acid added to the oxidant was lower. The $NO_2$ adsorption was also better with increasing NaOH concentration, but the NO removal efficiency was ~20% lower than that of the selective NO reduction. Indeed, this experimental method is expected to be a new method that can be applied to the capture and removal of fine dust caused by air pollution because it is a method that can easily remove NO gas by a simple device without expensive giant equipment.

• Applied Chemistry for Engineering
• /
• v.23 no.2
• /
• pp.190-194
• /
• 2012

10 wt% Mn supported on various commercial $TiO_2$ catalysts were prepared by wet-impregnation method for the low temperature selective catalytic reduction (SCR) of NO with $NH_3$. A combination of various physico-chemical techniques such as BET, XRD, XPS and TPR were used to characterize these catalysts. MnOx surface densities on MnOx/$TiO_2$ catalyst were related to surface area. As MnOx surface density lowered with high dispersion, the SCR activity for low temperature was increased and the reduction temperature ($MnO_2$ ${\rightarrow}$ $Mn_2O_3$) of surface MnOx was lower. For a high SCR, MnOx could be supported on a high surface area of $TiO_2$ and should be existed a high dispersion of non-crystalline species.

• YAKHAK HOEJI
• /
• v.58 no.5
• /
• pp.343-348
• /
• 2014

In the present studies, we examined effect of chamomile flowers extract (CH-Ex), which has traditionally been used as antiphlogistics in Europe for many centuries, against Candida albicans-caused septic arthritis. Candida albicans is a major etiological agent among fungal septic arthritis. This effect was investigated in a murine model of the septic arthritis. That is, mice that were given an emulsion form of C. albicans cell wall (CACW) via footpad route were treated intraperitoneally with the CH-Ex for 3 times every 3 days. Degrees of the footpad-swellings were measured with dial gauger. Data showed that the CH-Ex resulted in the reduction of swelling. For instance, at Day 9 when swelling reached the highest peak, there was up to app. 60% reduction of edema in mice injected with the CH-Ex, compared to that of the control mice that received no treatment (P<0.05). This therapeutic anti-arthritic activity appeared to be mediated by inhibitions of NO (nitric oxide) production from activated RAW264.7 macrophages and proliferation of Con A-treated T lymphocytes. Analysis by HPLC revealed that the CH-Ex contained eight polyphenolic compounds including chlorogenic acid (CRA) and rutin. We have reported the CRA and rutin respectively have the anti-arthritic activity. This correlation implicates that CRA and rutin in the CH-Ex may be responsible for the activity. Combined all together, the CH-Ex has anti-arthritic activity against C. albicans-caused septic arthritis, possibly by inhibiting NO production and proliferation of T cells. This activity seems to be contributed by, at least, CRA and rutin among the compounds in the CH-Ex.