• 제목/요약/키워드: oversampled

검색결과 24건 처리시간 0.029초

Design of M-Channel IIR Uniform DFT Filter Banks Using Recursive Digital Filters

  • Dehghani, M.J.;Aravind, R.;Prabhu, K.M.M.
    • ETRI Journal
    • /
    • 제25권5호
    • /
    • pp.345-355
    • /
    • 2003
  • In this paper, we propose a method for designing a class of M-channel, causal, stable, perfect reconstruction, infinite impulse response (IIR), and parallel uniform discrete Fourier transform (DFT) filter banks. It is based on a previously proposed structure by Martinez et al. [1] for IIR digital filter design for sampling rate reduction. The proposed filter bank has a modular structure and is therefore very well suited for VLSI implementation. Moreover, the current structure is more efficient in terms of computational complexity than the most general IIR DFT filter bank, and this results in a reduced computational complexity by more than 50% in both the critically sampled and oversampled cases. In the polyphase oversampled DFT filter bank case, we get flexible stop-band attenuation, which is also taken care of in the proposed algorithm.

  • PDF

쌍선형 변환에 의한 과표본화율의 시그마-델타 A/D 변환율 (Oversampled Sigma-Delta A/D Converters Designed by Bilinear Transform)

  • Park, Chong-Yeun
    • 대한전자공학회논문지
    • /
    • 제27권5호
    • /
    • pp.808-815
    • /
    • 1990
  • This paper treats with the design method for the single loop oversampled Sigma-Delta A/D converter with one delay and the digital integrator. Such an integrator was kgenerated by means of the bilinear transform of the analog integrator. The frequency spectrums of the quantizer and the decimator output signal are evaluated by FFT respectively. With the performance evaluation system, the values of SNR are obtained versus the input sinusoidal signal amplitude, frequency, the oversampling ratio, the DC-input level, the loop gain and the limitting value of the integrator. As compared with existing results, values of SNR versus the input signal amplitude and the oversampling ratio for the suggested system are about 6dB higher then previously reported results respectively. Furthermore, this approach achieves an about 60dB input dynamic range.

  • PDF

비균일 양자기에 의한 과표본화율의 멀티빗트 시그마-델타 A/D 변조기의 개발 (Development of Oversampled Multibit Sigma-Delta A/D Convertor with Nonuniform Quantizer)

  • 박종연;장목순
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1995년도 추계학술대회 논문집 학회본부
    • /
    • pp.489-492
    • /
    • 1995
  • This paper has represented the new system for a multibit oversampled sigma-delta A/D convertor. The novel digital correction scheme with the ROM-Table is employed to enhance SNR without requiring accurate precision of the analogue components. This architectures have a good features compared with the 1-bit approach, including significantly lower quantization noise for a given oversampling ratio, as well as improved stability characteristics. Then we have shown the validity of the proposed system by use of the software for the performance evaluation and by realizing the system with SCFs(switched capacitor filter).

  • PDF

전력선 통신에서 오버 샘플링과 Slew Rate 제한을 이용한 임펄스 잡음 제거 기법 (Mitigation of Impulse Noise Using Slew Rate Limiter in Oversampled Signal for Power Line Communication)

  • 오우진;나타라잔 발라
    • 한국정보통신학회논문지
    • /
    • 제23권4호
    • /
    • pp.431-437
    • /
    • 2019
  • 전력선 통신(PLC: Power Line Communication)은 저비용으로 고속 전송이 가능하여 스마트 그리드와 연계하여 다양하게 활용되고 있다. 그러나 전력선 채널은 임펄스 잡음으로 인하여 많은 문제가 있어 이를 해결하기 위하여 다양한 연구가 진행되어 왔다. 최근에는 아날로그 신호에 대한 비선형 필터에 적응형 clippling을 사용하는 ACDL(Adaptive Cannonical Differential Limiter)이 제안되었다. 본 논문에서는 이의 특성을 분석하고 간략화하여 오버샘플링된 디지털신호에 대해 slew rate를 검출하는 방안과 유사함을 보였다. 제안된 방식은 모의 실험으로 PRIME 표준에서 성능을 검증하여 ACDL과 동일 수준 이상의 성능을 가지면서도 훨씬 간단히 구현이 가능한 장점을 확인하였다. BER 성능은 동등하면서도 복잡도는 10%이하로 줄어든다.

A Simplified Zero-Forcing Receiver for Multi-User Uplink Systems Based on CB-OSFB Modulation

  • Bian, Xin;Tian, Jinfeng;Wang, Hong;Li, Mingqi;Song, Rongfang
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제14권5호
    • /
    • pp.2275-2293
    • /
    • 2020
  • This paper focuses on the simplified receiver design for multi-user circular block oversampled filter bank (CB-OSFB) uplink systems. Through application of discrete Fourier transform (DFT), the special banded structure and circular properties of the modulation matrix in the frequency domain of each user are derived. By exploiting the newly derived properties, a simplified zero-forcing (ZF) receiver is proposed for multi-user CB-OSFB uplink systems in the multipath channels. In the proposed receiver, the matrix inversion operation of the large dimension multi-user equivalent channel matrix is transformed into DFTs and smaller size matrix inversion operations. Simulation is given to show that the proposed ZF receiver can dramatically reduce the computational complexity while with almost the same symbol error rate as that of the traditional ZF receiver.

수신신호의 비정수배 과표본화를 이용한 OFDM 수신기의 성능 개선 (Performance Improvement of OFDM Receivers by Using Rational Oversampling of the Received Signals)

  • 이영수;서보석
    • 디지털콘텐츠학회 논문지
    • /
    • 제10권2호
    • /
    • pp.189-198
    • /
    • 2009
  • 이 논문에서는 직교 주파수분할 다중화(orthogonal frequency division multiplexing: OFDM) 수신기에서 수신 신호를 과표본화(oversampling)하여 성능을 개선하는 방법을 제안한다. 수신된 OFDM 신호를 복조하는 것은 각 부반송파에 해당하는 정현파 성분의 진폭과 위상을 추출하는 것과 동일하다. OFDM 수신신호를 과표본화 하면 주파수 영역에서 진폭은 동일하고 위상만 다른 신호를 과표본화율만큼 중복해서 얻을 수 있다. 이 성질을 이용하여 과표본화율만큼 신호대잡음비를 개선할 수 있다. 이 논문에서는 과표본화율이 정수인 경우만 가능하던 기존의 과표본화 방법을 일반적인 비정수로 확장하고 그에 적합한 수신기 구조를 제안하고자 한다. 또 모의실험을 통해 비이상적인 대역제한 필터를 사용하는 수신기의 성능을 비교함으로써 제안한 방식의 타당성을 보인다.

  • PDF

SMOTE를 이용한 편중된 횡 분산계수 데이터에 대한 추정식 개발 (Development of empirical formula for imbalanced transverse dispersion coefficient data set using SMOTE)

  • 이선미;윤태원;박인환
    • 한국수자원학회논문집
    • /
    • 제54권12호
    • /
    • pp.1305-1316
    • /
    • 2021
  • 본 연구에서는 과거 추적자실험결과를 이용하여 2차원 횡분산계수에 대한 새로운 추정식을 개발하고 추정식을 이용한 횡 분산계수 산정결과의 정확도를 검증했다. 다수의 추적자실험이 하폭 대 수심비가 50보다 작은 조건에서 수행되었기 때문에 기존 추적자실험결과만을 이용하여 개발한 추정식은 하폭 대 수심비가 50보다 큰 조건의 하천에 적용하는데 한계를 보인다. 따라서 특정 수리조건에 편중된 횡 분산계수 자료로부터 횡 분산계수 추정식을 개발하기 위해 SMOTE (Synthetic Minority Oversampling TEchnique)를 적용하여 기존 자료의 특성을 반영한 새로운 데이터를 생성했다. SMOTE 기법으로 하폭 대 수심비가 50보다 큰 조건에 대한 수리량과 횡 분산계수 데이터를 생성하였으며, ROC (Receiver Operating Characteristic) 곡선으로부터 생성된 데이터의 신뢰성을 검증했다. 새롭게 생성된 데이터를 포함하여 횡 분산계수 추정식을 개발했고, 추정식을 이용하여 계산한 횡 분산계수의 R2(결정계수)를 계산하여 기존 연구에서 제안한 추정식과의 정확도를 비교했다. 그 결과, 본 연구에서 개발한 추정식을 이용하여 계산한 횡 분산계수의 R2가 W/H < 50인 조건에서 0.81, 50 < W/H 인 조건에서 0.92를 나타내어 기존 추정식과 비교하여 향상된 정확도를 나타냈다.

오버샘플링 시그마-델타 변환기의 설계와 응용 (The Design and Application of Oversampling Sigma-Delta Converters)

  • 신종한;박송배
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1991년도 하계학술대회 논문집
    • /
    • pp.861-865
    • /
    • 1991
  • Sigma delta modulation has been the preferred technique for oversampling conversion. In this paper we present the basic principles of oversampled sigma-delta Converters. Basic operation and theory behind sigma-delta modulation is reviewed. The different structures of the sigma-delta converters are described and the concepts of designing modulators and digital filters are discussed. The latest designs are also reviewed.

  • PDF

A Comparison of NLSY and CPS Data

  • Jo, Yoon-Ae
    • Journal of the Korean Data and Information Science Society
    • /
    • 제17권3호
    • /
    • pp.851-859
    • /
    • 2006
  • The family income distributions of NLSY97 and CPS youth data are compared by using the generalized beta distribution of the second kind. The null hypothesis that the two data sets represent the same underlying population is rejected. The ML estimation suggests that NLSY97 data are oversampled in an income group of $11,308 or less, by about 15.7% compared to CPS data.

  • PDF

CDMA2000 1x 역방향 링크의 신호 품질 측정 알고리즘 (A Signal Quality Measurement Algorithm for CDMA2000 1x Reverse-link)

  • 강성진
    • 한국항행학회논문지
    • /
    • 제16권6호
    • /
    • pp.997-1004
    • /
    • 2012
  • 본 논문에서는 CDMA2000 1x 단말기 신호의 품질 측정을 위한 알고리즘을 제안하고 구현하였다. 제안된 알고리즘은 PC 기반 플랫폼에서 소프트웨어로 구현이 가능하도록 하였으며, 4배 오버샘플링된 입력 신호에 대하여 등화, PN 부호 동기 및 추적, 주파수 및 위상 오프셋 보상을 수행하여 수신 신호가 추출되고, 추출된 신호로부터 역확산, 복조를 통해 측정에 사용될 기준 신호를 재생성한다. 이 재생성된 신호와 추출된 신호를 이용하여 단말기의 신호 품질을 측정한다.