• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.11
• /
• pp.6399-6405
• /
• 2014

An external overload or impact is an important factor affecting the safety of large-scale structures. The proposal of this paper is the development of a system for detecting overload and impulse using a single PVDF film sensor. In large-scale structures, the load causes the structure to be deformed and the impulse generates vibration on the structure. Generally, low frequency deformation or bending of a structure is measured with a strain gauge and the high frequency vibration is detected by an accelerometer. On the other hand, a single sensor that can detect both deformation and vibration has not been developed. In this study, the development of a detection system integrated with a polyvinylidene fluoride (PVDF) film sensor, amplifier, and software was attempted to monitor deformation and impact through a single sensor. The system was verified by the possibility of detecting overload and impulse, and the two filtered signals of the PVDF were compared with a conventional strain gauge and an accelerometer.

• The Journal of the Korea Contents Association
• /
• v.17 no.12
• /
• pp.25-33
• /
• 2017

An increase of the interaction speed can lead to the problem of over-relations. Due to psychological and temporal burdens caused by the excessive relationship, users feel fatigue and users are avoiding using SNS. SNS fatigue and SNS anxiety is regarded as SNS stress related to the side effects caused by the SNS use. This study is to approach negative view which is SNS stress and find out causes of stress from the over-relation of interaction. This study used total of 261 samples from Facebook users. As a results, all hypothesis are accepted using SEM(Structural Equation Model). Information sharing and communication have positive effect on social interaction overload and it causes technostress. The results of this study show that SNS characteristics occurs technostress. This study is significant in that it examines that the features of SNS have negative results.

• Journal of Advanced Navigation Technology
• /
• v.21 no.6
• /
• pp.529-536
• /
• 2017

The general ground control system has control and information display functions for the operation of a single unmanned aerial vehicle. Recently, the function of the single ground control system extends to the operation of multiple UAVs. As a result, operators have been exposed to more diverse tasks and are subject to task overload due to various factors during their mission. This study proposes an adaptive ground control system that reflects the operator's condition through the task overload measurement of multiple UAV operators. For this, the ground control software is developed to control multiple UAVs at the same time, and the simulator with six degree-of-freedom aircraft dynamics is constructed for realistic human-machine-interface experiments by the operators.

• Convergence Security Journal
• /
• v.16 no.7
• /
• pp.41-49
• /
• 2016

The need for protecting computerized medical information has been growing as information and communication technology has rapidly been developed. Government is also promoting institutional improvement measures for the information protection of medical institutions. With more emphasis upon the efforts to enhance the information protection capability of the medical institution, however, it could increase stress to the hospital workers and cause a reduction in the quality of essential medical services of medical institutions. Therefore, it is necessary to research the stress from hospital workers to strengthen the protection of information that medical institutions to manage and its antecedents. Based on the results of relevant researches, this study selected several factors that affect the security stress, including work overload, invasion of privacy and work uncertainty. The sample for this study was 123 hospital workers who were surveyed by questionnaire. The factor analysis and multiple regression method were employed for the analysis of this study. The results of this study showed that work overload, invasion of privacy and some of work uncertainty were the main factors positively influencing the security stress.

• Korean Journal of Adult Nursing
• /
• v.13 no.4
• /
• pp.560-570
• /
• 2001

Purpose: The purpose of this study is to identify factors of the causal attribution of cancer and to determine related variables. Method: Subjects were one hundred and thirty three cancer patients. The tool of the perceived causal attribution used was developed by authors and basically founded on Kim's work(1993). The SAS program was used to analyze the data along with descriptive statistics, t-test, ANOVA, Duncan's Multiple range test, and Principal component analysis and varimax rotation. Results: 1) The perceived causal attribution measurement revealed four factors; overload, destiny, stress, and constitution. The total percentage of variance explained by the four factors was 44.3%. 2) The scores of destiny on women, having religion, unemployed, lower level of education, no spouse, groups of uterine cervix and lung cancer, not receiving an operation and receiving radiation were significantly higher than those other groups. 3) The scores of stress on women, having religion, and not having a job were significantly higher than those on men, without religion, and having a job. 4) The scores of constitution on those in their forties, women, not receiving an operation and receiving radiation were significantly higher than for those in their sixties, men, receiving operation and not receiving radiation. There was no significant difference in the factor scores of overload by any variables. Conclusion: Factors of the perceived causal attribution of cancer among Korean cancer patients were overload, destiny, stress, and constitution. The scores of each factor the perceived causal attribution was significantly different by general and disease related characteristics.

• Journal of the Korean Society of Safety
• /
• v.32 no.2
• /
• pp.27-33
• /
• 2017

This study is intended to identify issues on the basis of investigating the actual state of laboratory environment and outlet circuit, and derive end states by expressing sequences from the initiating event of disaster to accident in leakage current, poor contact and overload through ETA(event tree analysis). To this end, this study investigated the actual state of electric equipment of laboratory at universities in all parts of country. And it is shown that most of them are failure in electric work and user negligence in the investigation of actual state. It is found that there is earth fault and defect in wire diameter in the failure of electric work and the problem of partial disconnection due to wire bundling and poor contact in user negligence. Outlet-related component, failure rate and initiating events are composed of a total of 41 initiating events, i.e., 30 internal initiating events and 11 external initiating events. And end states are composed of a total of 15 parts, i.e., 3 electric power parts and 12 safety parts. Earthing class 3 is the most important safety device against leakage current (initiating event). And in case of poor contact, it is necessary for manager to check thoroughly because there is no safety device. In case of overload/overcurrent, when high-capacity equipment is connected, a molded case circuit breaker, safety device, worked. However, in most cases, it is verified that this doesn't work. This study can be utilized as electric equipment safety guide for laboratory safety manager and managers.

• Journal of the Korean Society of Safety
• /
• v.32 no.2
• /
• pp.117-123
• /
• 2017

This study was intended to find methods of fire extinguishing system designs that can improve the equipment's usability. In this study, the fire suppression experiment through fire extinguishers and the data drawn through the experiment were analyzed, and then the guideline for the improvement of designs was presented. The procedure is as follows. A fire suppression experiment with the use of fire extinguishers was done by 43 average adults. The whole process of the fire suppression was videotaped, and then captured major scenes were analyzed with the use of RULA, a human engineering measurement tool. The analyzed data were divided into 4 steps, and then the guideline for design improvement was presented. The summary of the study is as follows. Step 1, Fire extinguisher distance step. To reduce overload occurring at the process of holding fire extinguishers suddenly, wheels are attached to the body of extinguishers, or pedestals are installed. Step 2, Fire extinguisher transportation step. The length of hose is extended, or fire fighting water is sprayed far, so that overload of legs occurring at the process of travel can be reduced. In addition, the weight of fire extinguisher shouldn't be over 2 kg. Step 3, Safety pin removal stage. Safety pins should be applied with button type, so that excessive posture of lower limbs and excessive twisting of wrists won't happen during safety pin removal process. Besides, safety pins should be designed for easy identification and operation. Step 4, Fire extinguishing agent spraying step. To reduce overload occurring at sudden spraying of fire fighting water, pressure should be increased gradually until high pressure. With the above study results applied to existing fire extinguisher design, it may contribute to reducing any fire damage.

• Journal of Nutrition and Health
• /
• v.32 no.3
• /
• pp.248-258
• /
• 1999

This study examined the effect of excess loading of calcium (Ca)and iron(Fe) on the bioavailability of minerals in both normal and Ca-and Fe-deficient rats. Three-week-old male rats were divided into four groups and fed experimental diets for six weeks, containing either normal (0.5%) or high(1.5%) Ca and normal (35ppm) or high (350ppm)Fe. Likewise, three-week-old male rats were first fed a Ca-and Fe-deficient diet for three weeks, and then fed one of four experimental diets for additional three weeks. In both normal and Ca-and Fe-deficient rats, ca contents of serum, liver, kidney and femur were not significantly affected by dietary Ca and Fe levels. Apparent Ca absorption(%) decreased in rats fed a high Ca diet regardless of dietary Fe levels. Magnesium(Mg) contents of serum, liver and femur significantly decreased in rats fed a high Ca diet. Fe contents of serum and liver significantly increased in rats fed a high-Fe diet, but decreased in rats fed a high Ca diet. Fe content of serum and liver significantly increased in rate fed a high-Fe diet, decreased in rats fed a high-Ca diet. Apparent Fe absorption increased in rats fed a high-Fe diet, and decreased in rats fed a high-Ca diet in Ca-and Fe-deficient rats, but dietary Ca did not seem to affect Fe absorption in normal rats. Phosphorus(P) contents of serum and femur were not significantly affected by dietary Ca and Fe levels in both normal and Ca-and Fe-deficient rats. Serum copper(Cu) decreased in rats fed a high-Fe diet, while serum zinc(Zn) decreased in rats fed a high-Ca diet in normal rats. Cu contents of liver, and Zn contents of serum and liver decreased in rats fed a high-Fe diet in Ca-and Fe-deficient rats. There results suggest that a dietary overload of Ca and Fe in both normal and Ca-and Fe-deficient rats may decrease mineral bioavailability leading to potential health problems.

• Journal of KIISE:Computer Systems and Theory
• /
• v.29 no.11
• /
• pp.611-621
• /
• 2002

For real-time systems, multiprocessor support is indispensable to handle the large number of requests. Existing real-time on-line scheduling algorithms such as Earliest Deadline First Algorithm (EDF) and Least Laxity Algorithm (LLA) may not be suitable for scheduling real-time tasks in multiprocessor systems. Although EDF has low context switching overhead, it suffers from "multiple processor anomalies." LLA has been shown as suboptimal, but has the potential for higher context switching overhead. Earliest Deadline Zero Laxity (EDZL) solved somewhat the problems of those algorithms, however is suboptimal for only two processors. Another algorithm EDA2 shows very good performance in overload phase, however, is not suboptimal for muitiprocessors. We propose two on-line scheduling algorithms, Earliest Deadline/Least Laxity (ED/LL) and ED2/LL. ED/LL is suboptimal for multiprocessors, and has low context switching overhead and low deadline miss rate in normal load phase. However, ED/LL is ineffective when the system is overloaded. To solve this problem, ED2/LL uses ED/LL or EDZL in normal load phase and uses EDA2 in overload phase. Experimental results show that ED2/LL achieves good performance in overload phase as wet] as in normal load phase.oad phase.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.3
• /
• pp.15-22
• /
• 2003

The fatigue crack growth model is derived and the retardation model is proposed. The fatigue crack growth model considers the residual plastic stretch on the crack surface which results from the plastic deformation at the tip of fatigue crack. The fatigue crack growth rate is calculated by using the cumulative fatigue damage and plastic strain energy in the material elements at the crack tip. This model gives the crack growth rate in reasonable agreement with test data for aluminum alloy AL6061-T651 and 17-4PH casting steel. The fatigue crack growth retardation model is based on the residual plastic stretch produced from a tensile overload which reduced the plastic strain range of the following load cycles. A strip-yield model of a crack tip plasticity is used for the calculation of a plastic zone size. The proposed retardation model characterized the observed features and delayed retardation of the fatigue crack growth under tensile overload.