• Journal of Information Management
• /
• v.26 no.3
• /
• pp.54-62
• /
• 1995

The purpose of this study is to analyze the data of $\ulcorner$Union Catalog of Foreign Journals$\lrcorner$ Database, which has been revised and updated in 1995. The database includes 13,449 titles of foreign journals in scienc and technology which is a collection of 253 libraries in Korea. The items of analysis are nation, language, frequency, subject of each title, and also collection overlap, etc.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.6
• /
• pp.951-957
• /
• 1994

We present a new model for the series resistance of inverted-staggered amorphous silicon (a-Si) thin film transistors (TFT's) by employing the current spreading under the source and the drain contacts as well as the space charge limited current model. The calculated results based on our model have been in good agreements with the measured data over a wide range of applied voltage, gate-to-source and gate-to-drain overlap length, channel length, and operating temperature. Our model shows that the contribution of the series resistances to the current-voltage (I-V) characteristics of the a-Si TFT in the linear regime is more significant at low drain and high gate voltages, for short channel and small overlap length, and at low operating temperature, which have been verified successfully by the experimental measurements.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.2
• /
• pp.130-133
• /
• 2011

A comparative study of two capacitance methods to measure the effective channel length in deep-submicron MOSFETs has been made in detail. Since the reduction of the overlap capacitance in the accumulation region is smaller than the addition of the inner fringe capacitance at zero gate voltage, the capacitance method removing the parasitic capacitance in the accumulation region extracts a more accurate effective channel length than the method removing that at zero gate voltage.

• Journal of Applied Reliability
• /
• v.17 no.4
• /
• pp.273-279
• /
• 2017

Purpose: Recently, Issues on security for vehicles are getting increased all around the world. Especially, hood panel needs to be thinner for the protection of pedestrians. But thinner panel makes durability get worse. So, it is needed to satisfy both of them. Methods: Durability effectiveness will be studied because properties and assembly allowance of over-slam bumper mostly affects durability of hood panel. Overlap of over-slam bumper can be made in production line and it can affect durability of spot welding in hood inner panel. Daguchi method is used to catch the condition in which load gets smaller and location, hardness and quantity of overlap are selected to be factors. Durability effectiveness is analyzed with the factors. Result: the mechanism that affects on spot welding is identified. The test was conducted in both open/close and driving condition and the relation between both conditions is analyzed. Conclusion: The test contributed to durability of hood panel with optimization of over-slam bumper.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.27 no.2
• /
• pp.146-159
• /
• 2023

This paper proposes a hybrid algorithm combining K-means clustering and watershed algorithms for flower segmentation and counting. We use the K-means clustering algorithm to obtain the main colors in a complex background according to the cluster centers and then take a color space transformation to extract pixel values for the hue, saturation, and value of flower color. Next, we apply the threshold segmentation technique to segment flowers precisely and obtain the binary image of flowers. Based on this, we take the Euclidean distance transformation to obtain the distance map and apply it to find the local maxima of the connected components. Afterward, the proposed algorithm adaptively determines a minimum distance between each peak and apply it to label connected components using the watershed segmentation with eight-connectivity. On a dataset of 30 images, the test results reveal that the proposed method is more efficient and precise for the counting of overlapped flowers ignoring the degree of overlap, number of overlap, and relatively irregular shape.

• Journal of Korea Water Resources Association
• /
• v.34 no.6
• /
• pp.577-586
• /
• 2001

This study proposes a theoretical methodology for deriving a rainfall intensity-duration- frequency (I-D-F) curve using a simple rectangular pulses Poisson process model. As the I-D-F curve derived by considering the model structure is dependent on the rainfall model parameters estimated using the observed first and second order statistics, it becomes less sensitive to the unusual rainfall events than that derided using the annual maxima rainfall series. This study has been applied to the rainfall data at Seoul and Inchon stations to check its applicability by comparing the two I-D-F carves from the model and the data. The results obtained are as followed. (1) As the duration becomes longer, the overlap probability increases significantly. However, its contribution to the rainfall intensity decreases a little. (2) When considering the overlap of each rainfall event, especially for large duration and return period, we could see obvious increases of rainfall intensity. This result is normal as the rainfall intensity is calculated by considering both the overlap probability and return period. Also, the overlap effect for Seoul station is fecund much higher than that for Inchon station, which is mainly due to the different overlap probabilities calculated using different rainfall model parameter sets. (3) As the rectangular pulses Poisson processes model used in this study cannot consider the clustering characteristics of rainfall, the derived I-D-F curves show less rainfall intensities than those from the annual maxima series. However, overall pattern of both I-D-F curves are found very similar, and the difference is believed to be overcome by use of a rainfall model with the clustering consideration.

• Journal of Korean Society of Transportation
• /
• v.34 no.4
• /
• pp.304-317
• /
• 2016

The advancement in technology including transportation and information communication has accelerated the flow of supplies, and the importance of the national logistics policy has increased following the expansion of the regional range of logistics to a national range. The rapid growth of the domestic logistics market results in the deficit of logistics facilities, inefficient operation of logistics facilities, and a complicated distribution structure. It has precipitated a plan aimed at efficiency improvement by building base logistics facilities, but this market is now undergoing difficulties due to low performance. Many studies on the revitalization of base logistics facilities have been conducted, but a causal analysis focusing on the function overlap of private logistics businesses has been absent. Therefore, this study has analyzed the function overlap of logistics facilities and the irrationality of the system, which resulted from the lost function of Inland Freight bases in the Yeongnam region. By suggesting the cause of disuse of base logistics complexes from the function overlap in the ground transportation of domestic freight, the study can provide the policy implication for the national logistics infrastructure.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.4
• /
• pp.321-327
• /
• 2012

This paper presents a comparative analysis on three different types of performance indices of obstacle detection for an overlapped ultrasonic sensor ring. Due to beam overlap, the entire sensing zone of each ultrasonic sensor can be divided into three smaller sensing subzones, which leads to significant reduction of positional uncertainty in obstacle detection. First, the positional uncertainty in obstacle detection is expressed in terms of the area of a sensing subzone, and type 1 performance index is then defined as the area ratio of side and center sensing subzones. Second, based on the area of a sensing subzone, type 2 performance index is defined taking into account the size of the entire range of obstacle detection as well as the degree of the positional uncertainty in obstacle detection. Third, the positional uncertainty in obstacle detection is now expressed in terms of the length of the uncertainty arc spanning a sensing subzone, and type 3 performance index is then defined as the average value of the uncertainty arc lengths over the entire range of obstacle detection. Fourth, using a commercial low directivity ultrasonic sensor, the changes of three different performance indices depending on the parameter of an overlapped ultrasonic sensor ring are examined and compared.

• Journal of Gastric Cancer
• /
• v.19 no.3
• /
• pp.344-354
• /
• 2019

Purpose: No standard technique has been established for esophagojejunal anastomosis during laparoscopic total gastrectomy (LTG) for gastric cancer owing to the technical difficulty and high complication rate of this procedure. This study was performed to compare the short-term outcomes of circular and linear stapling methods after LTG. Materials and Methods: A total of 106 patients treated between July 2010 and July 2018 were divided into 2 groups according to the following anastomosis procedures: hemi-double-stapling technique (HDST; circular stapling method; group C, n=77) or overlap method (linear stapling method; group L, n= 29). The clinicopathological features and postoperative outcomes, including complications, were analyzed. Multivariate analysis was performed using a logistic regression model to identify the independent risk factors for anastomotic complications. Results: The incidence of anastomotic complications was significantly higher in group C than in group L (28.0% vs. 6.9%, P=0.031). The incidence of anastomosis leakage did not differ between the groups (6.5% vs. 6.9%, P=1.000). However, anastomosis stricture occurred only in group C (13% vs. 0%, P=0.018). Multivariate analysis showed that the anastomosis type was significantly related to the risk of anastomotic complications (P=0.045). Conclusions: The overlap method was superior to the HDST with respect to anastomotic complications, especially anastomosis stricture.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.1127-1130
• /
• 1999

In this paper, using one method of Additive Synthesis, Analysis-by-synthesis/Overlap-Add (ABS/OLA) method, analysis and synthesis of musical tones is processed. But peak detection of frequency domain is processed by proposed method considering the view of acoustics. It is that that harmonics frequency is times of main frequency. Using this fact, peak detection of frequency domain is useful for detection of tonal component identified musical note. It is possible to realize high-quality lour bit rate audio.