• Journal of the Korean Solar Energy Society
• /
• v.27 no.3
• /
• pp.127-133
• /
• 2007

Underfloor air distribution system is generally known to be more energy-saving and provide more comfort as compared with overhead air distribution system. In practice, however, some buildings to which underfloor air distribution system is applied have less effectiveness in saving energy and are getting dissatisfaction with cold draft caused by wind velocity of air distribution in terms of comfort. It is judged that such problems are due to failure to consider properties of underfloor air distribution system in applying it and identical design with the design standards for the existing overhead air distribution system. This study aims at introducing an air conditioning type of the occupied zone for underfloor all distribution system to see its effectiveness in saving energy for air conditioning of the occupied zone through a comparative simulation with the existing air conditioning type.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.5B
• /
• pp.317-326
• /
• 2012

Recently, many researchers have studied to solve the energy consumption of network equipments since the interest of Green IT has been increased. In this paper, we apply Low Power Idle (LPI) to OBS network to reduce energy consumption of network devices. Many previous researches have focused on maximizing the sleep time of network equipments to increase the energy saving efficiency of LPI. But transition overhead caused by LPI might not only depreciate the performance of energy saving but also increase packet delay. In this paper, Transition Decision (TD) algorithm is proposed to improve energy saving efficiency by reducing the number of unnecessary transition and guarantee the required QoS such as packet delay. To evaluate the performance of proposed algorithm, we model OBS edge router with LPI by OPNET and analyze the performance of the proposed algorithm in views of energy saving, transition count and average packet delay.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.2
• /
• pp.550-565
• /
• 2018

Cognitive radio technology is still the key technology of future mobile communication systems. Previous studies have focused on improving spectrum utilization and less energy consumption. In this paper, we propose an Overhead Reduced Scheme (ORS) for green cooperative spectrum sensing. Compared to traditional cooperative sensing scheme, ORS scheme divides the sensing time into three time slots and selects the best multi-mode user to report decisions. In consideration of reporting channel deviation, we derive closed-form expressions for detection probability and false alarm probability of ORS scheme based on Rayleigh fading channel. Simulation results show that ORS scheme can improve the perception accuracy while reducing the perceived delay and energy consumption in the process of perception, so as to realize the green communication.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.11a
• /
• pp.297-299
• /
• 2004

In multi-ground distribution system, overhead ground wire and neutral wire are parallel connected to offer the electrical power energy and protect damage of lightning strokes. Therefore a case where the two wires become single wire, the power company can get the benefit such as installation cost saving and line fault protection by simplify of distribution line. In this paper we describe the result of impulse test in both system ; one is the present power system the other is unified power system parallel connected overhead ground wire and neutral wire. As a result of this impulse test, the present power system get lower impulse voltage than the unified power system.

• ETRI Journal
• /
• v.42 no.3
• /
• pp.341-350
• /
• 2020

In a wireless sensor network (WSN), the data transmission technique based on the cooperative multiple-input multiple-output (CMIMO) scheme reduces the energy consumption of sensor nodes quite effectively by utilizing the space-time block coding scheme. However, in networks with high node density, the scheme is ineffective due to the high degree of correlated data. Therefore, to enhance the energy efficiency in high node density WSNs, we implemented the distributed source coding (DSC) with the virtual multiple-input multiple-output (MIMO) data transmission technique in the WSNs. The DSC-MIMO first compresses redundant source data using the DSC and then sends it to a virtual MIMO link. The results reveal that, in the DSC-MIMO scheme, energy consumption is lower than that in the CMIMO technique; it is also lower in the DSC single-input single-output (SISO) scheme, compared to that in the SISO technique at various code rates, compression rates, and training overhead factors. The results also indicate that the energy consumption per bit is directly proportional to the velocity and training overhead factor in all the energy saving schemes.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.11
• /
• pp.5304-5322
• /
• 2018

Since designing a feedback topology is a practical way to implement interference alignment at reduced cost of channel state information (CSI) feedback, six feedback topologies have been presented in prior works for a K-user multiple-input multiple-output interference channel. To fully reveal the potential benefits of the feedback topology in terms of the saving of CSI overhead, we propose a new feedback topology in this paper. By efficiently performing dimensionality-decreasing at the transmitter side and aligning interference signals at a subset of receivers, we show that the proposed feedback topology obtains substantial reduction of feedback cost over the existing six feedback designs under the same antenna configuration.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.04a
• /
• pp.481-484
• /
• 1996

When logistics system is integrated with production system and marketing system, it takes a very important role of the business management. In general, measurement of logistics cost in logistics system uses the conventional cost assignment method. However the conventional method may result in the incorrect cost because the overhead cost may be incorrectly assigned to the products. Activity-Based Costing(ABC) was proposed as an alternative method which will distribute the overhead cost to each cost obeject more accurately. ABC assigns cost to activities based on the amounts of resources used by resource driver, and assigns cost to cost objects based on the amount of activities driver. This study proposes two heuristic algorithms. The first algorithm selects the best activity driver for each cost object by using correlation analysis. The best activity driver is the one that minimizes the sum of loss cost and measurement cost of activity driver. The second algorithm selects the best number of activities by using correlation analysis. The pair of activities with the highest correlation are combined into one if the saving of measurement cost is no less than the loss due to inaccurate distribution of overhead cost. In order to demonstrate the procedure and validity of the algorithms, Real data of one year from a paper manufacturer are used.

• Journal of Satellite, Information and Communications
• /
• v.6 no.2
• /
• pp.84-90
• /
• 2011

Handling paging mechanism at the IP layer (i.e., IP paging) makes it possible to support heterogeneous wireless access technologies, providing energy-saving and reduced location registration signaling overhead over IP-based mobile networks. However, IP paging may rather cause adverse effects under active communication environments because of significant paging signaling overhead and frequent paging delay. Therefore, in order to solve these problems, a cost-effective IP paging scheme is proposed in this paper, which enables a mobile node to perform selective registration and paging based on its profile information. Numerical results indicate that the proposed scheme has apparent potential to mitigate considerable paging signaling overhead and frequent paging delay in IP-based hierarchical mobile networks.

• Journal of Information Processing Systems
• /
• v.16 no.1
• /
• pp.83-95
• /
• 2020

Because sensor nodes have limited resources in wireless sensor networks, data aggregation can efficiently reduce communication overhead and extend the network lifetime. Although many existing methods are particularly useful for data aggregation applications, they incur unbalanced communication cost and waste lots of sensors' energy. In this paper, we propose a privacy-preserving, energy-saving data aggregation scheme (EBPP). Our method can efficiently reduce the communication cost and provide privacy preservation to protect useful information. Meanwhile, the balanced energy of the nodes can extend the network lifetime in our scheme. Through many simulation experiments, we use several performance criteria to evaluate the method. According to the simulation and analysis results, this method can more effectively balance energy dissipation and provide privacy preservation compared to the existing schemes.

• ETRI Journal
• /
• v.34 no.6
• /
• pp.807-815
• /
• 2012

In this paper, we propose a scheme for partially dynamic lane control for energy saving in multilane-based high-speed Ethernet. In this scheme, among the given transmission lanes, at least one lane is always operating, and the remaining lanes are dynamically activated to alleviate the network performance in terms of queuing delay and packet loss in the range of acceptance. The number of active lanes is determined by the decision algorithm based on the information regarding traffic and queue status. The reconciliation sublayer adjusts the transmission lane with the updated number of lanes received from the algorithm, which guarantees no processing delay in the media access control layer, no overhead, and minimal delay of the exchanging control frames. The proposed scheme is simulated in terms of queuing delay, packet loss rate, lane changes, and energy saving using an OPNET simulator. Our results indicate that energy savings of around 55% (or, when the offered load is less than 0.25, a significant additional savings of up to 75%) can be obtained with a queuing delay of less than 1 ms, a packet loss of less than $10^{-4}$, and a control packet exchange time of less than $0.5{\mu}s$ in random traffic.