• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.6
• /
• pp.482-487
• /
• 2013

The new recycling technology for aged aluminum wires in overhead conductor have been carried out. We are attempting to develop remanufacturing method for them for more effective way of recycling in stead of its conventional remelting process. The drawing process of aged aluminum wires play a role in remanufacture process. Drawing process was performed under lubricant. The speed of drawing was between 500 m/min and 1,000 m/min. These machines have 11 or 12 dies house for breakdown of the feedstock. Material of the die is tungsten carbide and they have generally 25% reduction ratio. The paper investigates the mechanical properties during drawing process of aged aluminum wire. The results of tensile tests and microscopic analysis were discussed to underscore the hardening features of drawing aluminum wire. Various graphs are presented accompanied by discussion about their relevance on the process.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.11 no.2
• /
• pp.125-134
• /
• 2016

NAND flash memory has unique characteristics like as 'out-place-update' and limited lifetime compared with traditional storage systems. According to out-of-place update scheme, a number of invalid (or called dead) pages can be generated. In this case, garbage collection is needed to reclaim invalid pages. Because garbage collection results in not only erase operations but also copy operations of valid (or called live) pages to other blocks, many garbage collection techniques have proposed to reduce the overhead and to increase the lifetime of NAND Flash systems. This techniques sometimes select victim blocks including cold data for the wear leveling. However, most of them overlook the cost of selecting victim blocks including cold data. In this paper, we propose a garbage collection technique named CAPi (Cost Age with Proportion of invalid pages). Considering the additional overhead of what to select victim blocks including cold data, CAPi improves the response time in garbage collection and increase the lifetime in memory systems. Additionally, the proposed scheme also improves the efficiency of garbage collection by separating cold data from hot data in valid pages. In experimental evaluation, we showed that CAPi yields up to, at maximum, 73% improvement in lifetime compared with existing garbage collections.

• The KIPS Transactions:PartC
• /
• v.11C no.1
• /
• pp.21-30
• /
• 2004

Most applications using the PKI allows a user to execute the certificate validation processing. The efficiency of user system can be declined by the user-side processing resulting the overhead and low speed of the validation processing. Therefore, in this paper, we propose a new certificate validation processing method can decrease the overhead on user by allowing CAs of the hierarchical PKI to participate in the validation processing. Therefore, our proposed scheme can not only reduce the considerable overhead caused by the user-side whole processing without a new implementation of the delegated server but also improve the time spent for the processing by the reduction of the validation processing job on user.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.5
• /
• pp.152-159
• /
• 2010

A combustion flame under the overhead power lines may be caused by breakdown disturbances in power systems. In this study, experiments were conducted for the purpose of investigating the reduction in insulation strength caused by combustion flame and the shape changes of the flame, and flashover characteristics and extinction phenomena of the flame in the simulated conditions of overhead power lines were examined under the application of a.c. and d.c. high-voltages. As the results of the experimental investigation, it is demonstrated that flame can remarkably reduce breakdown voltages of the air-gap in shorter range of the gap distance. As the gap distance increases, flame was quenched, before the flashover, by corona wind generated from the needle electrodes.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.2
• /
• pp.453-458
• /
• 2017

R-Bar (Overhead Rigid Conductor system) has been lately used for the speed of over 200km/h in Europe, while it has been developed and used for the max. speed of 120km/h in Korea. Because R-Bar has advantages of reduction of tunnel cross sectional area and maintenance, its development for more high-speed is urgent in Korea having many mountain area. Therefore a sensitivity analysis of design parameters for the speed-up of R-Bar has performed in this study. For the analysis, we have developed a program for the prediction of dynamic characteristics between a pantograph and R-Bar. The program was evaluated with the actual test result and a current collection performance according to the parameters such as a distance between brackets, a stiffness of bracket and of R-Bar rail was predicted with the program.

• Journal of IKEEE
• /
• v.21 no.2
• /
• pp.130-135
• /
• 2017

Normally, in data transmission, extra parity bits are added to the input message which were derived from its input and a pre-defined algorithm. The same algorithm is used by the receiver to check the consistency of the delivered information, to determine if it is corrupted or not. It recovers and compares the received information, to provide matching and correcting the corrupted transmitted bits if there is any. This paper aims the following objectives: to use an alternative error detection-correction method, to lessens both the fixed number of the required redundancy bits 'r' in cyclic redundancy checking (CRC) because of the required polynomial generator and the overhead of interspersing the r in Hamming code. The experimental results were synthesized using Xilinx Virtex-5 FPGA and showed a significant increase in both the transmission rate and detection of random errors. Moreover, this proposal can be a better option for detecting and correcting errors.

• Journal of Information Technology Applications and Management
• /
• v.10 no.2
• /
• pp.61-71
• /
• 2003

Ad-hoc networks are characterized by multi-hop wireless links, frequently changing network topology and the need for efficient dynamic routing protocols. In an Ad-hoc network, each host assumes the role of a router and relays packets toward final destinations Because a packet is broadcast to all neighboring nodes, the optimality criteria of wireless network routing is different from that of wired network routing. tn this paper 1 point out the more important cost factor than the number of links in the Ad-hoc network. A class routing protocols called on-demand protocols has recently found attention because of their low routing overhead since it performs a blind flooding to look for a path. In this paper, 1 propose the method which reduces overhead by using the information of neighboring nodes and doing a selective flooding. Simulation results demonstrate better reduction of routing overheads with this scheme.

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.339-341
• /
• 2002

The remaining life of ACSR exposed to the atmosphere for a long period may rely on deterioration caused by environmental indices such as atmospheric corrosion, galvanic corrosion, crevice corrosion and fatigue corrosion. One of reduction of useful life in overhead transmission lines built on the ridge of mountain is often caused by forest fires. This paper deals with investigation of strength deterioration performance of ACSR due to fires through several testing and analyzing data for both tension load and material analysis. Test samples are ACSR $480[mm^2]$ conductors, which are artificially fired to regular durations. As a result, it can be verified that tension load of ACSR are reduced by increasing fro duration. Hence, it is obvious that ACSR due to forest fires may lead to mechanical deterioration.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.11
• /
• pp.24-33
• /
• 2009

The transition of auxiliary lines for transmitting coding information has been one of the major obstacles to restricting the scalability of Sequence Switch Coding (SSC) algorithms. A new design of SSC which does not use auxiliary lines is presented in this paper. The new design makes overhead transitions far less than the previous designs that use auxiliary lines. By applying the new technique, more than 50% of overhead transitions have been reduced, leading to the increase of 30% of the overall efficiency of SSC algorithm.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.165.2-165.2
• /
• 2011

Flow with suction to water turbine must be in stable state at small hydraulic power plant. But because of water level fluctuation and water gate effect according to irregular supply of cooling water, it would happen to produce bubble and vortex and finally lead to problems in power-plant system. With utilizing the concept design of double size gate, surface water overflowed the overhead of gate for stable flow at suction. We developed the overflow condition and analyzed the design factor with existed one such as water level(overflow amount) and overhead of water gate(overflow figure). Flow test and CFD simulation say that flow have stable state around suction and 20% of wave reduction effect at surface layer after surface water overflow.