• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.2
• /
• pp.297-306
• /
• 2014

The paper presents the numerical analysis of wave run-up over rubble-mound breakwaters covered by antifer units using a technique integrating Computer-Aided Design (CAD) and Computational Fluid Dynamics (CFD) software. Direct application of Navier-Stokes equations within armour blocks, is used to provide a more reliable approach to simulate wave run-up over breakwaters. A well-tested Reynolds-averaged Navier-Stokes (RANS) Volume of Fluid (VOF) code (Flow-3D) was adopted for CFD computations. The computed results were compared with experimental data to check the validity of the model. Numerical results showed that the direct three dimensional (3D) simulation method can deliver accurate results for wave run-up over rubble mound breakwaters. The results showed that the placement pattern of antifer units had a great impact on values of wave run-up so that by changing the placement pattern from regular to double pyramid can reduce the wave run-up by approximately 30%. Analysis was done to investigate the influences of surface roughness, energy dissipation in the pores of the armour layer and reduced wave run-up due to inflow into the armour and stone layer.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.9 no.3
• /
• pp.282-291
• /
• 2017

The main aim of this study is to investigate the effect of berm breakwater on wave run-up. A total of 200 numerical analysis tests have been carried out in this paper to investigate the effect of berm width, wave height, and wave period on the wave run-up, using an integrating technique of Computer-Aided Design (CAD) and Computational Fluid Dynamics (CFD). Direct application of Navier Stokes equations within the berm width has been used to provide a more reliable approach for studying the wave run-up over berm breakwaters. A well tested Reynolds-averaged Navier-Stokes (RANS) code with the Volume of Fluid (VOF) scheme was adopted for numerical computations. The computational results were compared with theoretical data to validate the model outputs. Numerical results showed that the simulation method can provide accurate estimations for wave run-up over berm breakwaters. It was found that the wave run-up may be decreased by increasing the berm width up to about 36 percent. Furthermore, the wave run-up may increase by increasing the wave height and wave period up to about 53 and 36 percent, respectively. These results may convince the engineers to use this model for design of berm breakwater in actual scale by calculating the Reynolds numbers.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.4
• /
• pp.98-105
• /
• 2021

Using the frequency-based decomposition, I decompose the consumption growth to explain well-known patterns of stock returns in the Korean market. To be more specific, the consumption growth is decomposed by its half-life of shocks. The component over four years of half-life is called the business-cycle consumption component, and the components with half-lives under four years are short-run components. I compute the long-run and short-run components of stock excess returns as well and use component-by-component sensitivities to price stock portfolios. As a result, the business-cycle consumption risk with half-life of over four years is useful in explaining the cross-section of size-book-to-market portfolios and size-momentum portfolios in the Korean stock market. The short-run components have their own pricing abilities with mixed direction, so that the restricted one short-term factor model is rejected. The explanatory power with short- and long-run components is comparable to that of the Fama-French three-factor model. The components with one- to four-year half-lives are also helpful in explaining the returns. The results about the long-run components emphasize the importance of long-run component in consumption growth to explain the asset returns.

• Journal of Korean Institute of Industrial Engineers
• /
• v.28 no.3
• /
• pp.283-290
• /
• 2002

Two-level fractional factorial designs are widely used when many factors are considered. When two-level fractional factorial designs are used, some effects are confounded with each other. To break the confounding between effects, we can use fractional factorial designs, called fold-over designs, in which certain signs in the design generators are switched. In this paper, optimal fold-over designs with four-level quantitative and two-level factors are presented for (1) the initial designs without curvature effect and (2) those with curvature effect. Optimal fold-over design tables are provided for 8-run, 16-run, and 32-run experiments.

• Journal of Korean Society for Quality Management
• /
• v.38 no.2
• /
• pp.190-201
• /
• 2010

This research proposes a method for designing VSI (Variable Sampling Interval) control charts with supplementary run rules. The basic idea is to apply various run rules and the VSI scheme to a control chart in order to increase the sensitivity. The sampling process of the VSI run rules chart is constructed by Markov chain approach. A procedure for designing the VSI run rules chart is proposed based on Lorenzen and Vance's model. Sensitivity study shows that the VSI run rules charts outperform the FSI (Fixed Sampling Interval) run rules charts for wide range of process mean shifts. A major advantage of the VSI run rules chart over other charts such as CUSUM, EWMA, and adaptive charts is it's simplicity in implementation. Some useful guidelines are proposed based on the sensitivity study.

• 전기의세계
• /
• v.14 no.5
• /
• pp.28-33
• /
• 1965

현대의 항공기 발달로 인한 거리감의 단축은 새삼스럽게 말할 필요도 없으나 이들 항공기가 시정이 좋지 못할 때나 야간에 활주로에 안전하게 착륙하기 위하여는 착륙지(Run way)와 유도로(Taxi way)및 과주로(Over run)등에 독특한 조명장치가 필요하게 된다 여기서 현재 대부분의 비행장에서 사용하고 있는 비행장조명방식을 소개하고져 한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.4B
• /
• pp.429-439
• /
• 2008

The purpose of this study is to examine the characteristics of run-up height over sandy beach due to the shape of submerged breakwater. For the discussion on it in detail, 3-Dimensional numerical model with Large Eddy Simulation, which is able to simulate directly interaction of Wave Structure Sandy beach (hereafter, LES-WASS-3D; Hur and Lee, 2007) has been used to simulate run-up height over sandy beach as well as wave field around submerged breakwaters. Using the results obtained from numerical simulation, the effects of the shape of submerged breakwaters (crown height, crown width, crown length and submerged breakwater's slope gradient) on run-up height over sandy beach have been discussed related to the wave height distribution and characteristics of up-layer flow around ones.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.457-460
• /
• 2006

This study is to investigate the variation characteristics of run-up height over sandy beach due to the plane distribution of submerged breakwaters. In this study, Three-Dimensional numerical model with Large Eddy Simulation, which is able to simulate directly WAve Structure Seabed interaction (hereafter, LES-WASS-3D) has been newly developed. A comparison between the numerical model and existing experimental results was made to verify accuracy of newly proposed LES-WASS-3D model, and showed fairly nice agreement. In addition, based on the LES-WASS-3D model, the variation characteristics of run-up height over sandy beach are discussed with relation to the offshore distance and opening width of submerged breakwaters.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.283-296
• /
• 2020

A numerical model is established to investigate the run-up of a solitary wave after propagating over a triangular saw-tooth-shaped submerged breakwater. A rectangular-shaped submerged breakwater is simulated for comparison. Several factors, including the submerged depth, the lagoon length and the beach slope, are selected as independent variables. The free surface motions and velocity fields of the solitary wave interacting with the submerged breakwater are discussed. The results show that the submerged depth and lagoon length play significant roles in reducing the run-up. The influence of the beach slope is not significant. At the same submerged depth, the triangular saw-tooth-shaped submerged breakwater has only a slightly better effect than the rectangular-shaped submerged breakwater on the run-up reduction. However, a calmer reflected wave profile could be obtained with the rougher surface of the saw-tooth-shaped submerged breakwater. The study conclusions are expected to be useful for the conceptual design of saw-tooth-shaped submerged breakwaters.

• Korean Journal of Human Ecology
• /
• v.21 no.2
• /
• pp.377-388
• /
• 2012

The purpose of this study was to determine the content attributes and sensory characteristics of ice cream flavored with lotus leaf and seeds (Nelumbo nucifera Gaertner). Analysis of freeze dried lotus leaf powder produced the following technical results: Freeze dried lotus leaf powder contained moisture 12.2, crude protein 5.9, crude fat 1.2, crude ash 7.0, crude fiber 13.4g/100mg; raw lotus seed powder contained moisture 65.0, crude protein 8.2, crude fat 0.3, crude ash 1.0, crude fiber 10.8g/100mg; freeze dried lotus seed powder contained moisture 14.0, crude protein 17.1, crude fat 1.9, crude ash 4.0, crude fiber 2.8g/100mg. Lotus seed was processed by 4 methods: freeze dried, roasted, freeze dried peeled inner layer, cooked cut peeled inner layer. Analysis of the color value produced the following technical results: freeze dried lotus leaf powder were L(lightness) 14.5, a(redness) 4.4, b(yellowness) 24.0; freeze dried lotus seed powder L 57.3, a 14.4, b 12.0; roasted lotus seed powder L 52.7, a 22.5, b 11.9; freeze dried lotus seed peeled inner layer L 60.0, a 1.4, b 12.3. Proportional lotus ingredients used for ice cream were 1%, 3%, 5%, 7%, 10% for lotus leaves and 1%, 3%, 5% for lotus seeds. The maximum over run ratio for lotus leaf ice cream was 45.3~56.9% at 20~25 minutes operating time. Over run was significantly decreased by increasing the contents of lotus leaf powder. A maximum over run ratio for lotus seed ice cream was 46.1~54.3% at 20~25 operating time. Over run was not significantly different based on content of lotus leaf versus lotus seed. Sensory evaluation of lotus leaf ice cream produced the following results: the highest score was for color of 4.42 and the lowest score was for sweetness of 3.30. The total mean score significantly decreased by increasing the content of lotus leaf powder. Sensory evaluation of lotus seed ice cream produced the following results: the highest score was for cooked cut peeled inner layer type and the lowest was for freeze dried type 3.86. The sensory scores were not significantly different based on the content of lotus seed. Texture was evaluated highest with a rating of 4.21 and the taste was evaluated lowest with a rating of 3.68 For whole evaluation. This study concluded that lotus leaf ice cream demonstrates relative strength in terms of color and taste, and a relative weakness in terms of over run and sweetness. Suitable content of lotus leaf ranged from 1~5%. The lotus seed processed by the cooked cut peeled inner layer method received a higher rating than dried powder for lotus seed ice cream.