• 대한전자공학회논문지SD
• /
• 제45권3호
• /
• pp.54-59
• /
• 2008

본 논문에서는 광범위 출력전압을 위한 고정밀 BiCMOS cascode 전류미러를 제안하였다. 제안한 전류미러는 베이스 전류에러를 보상하는 BJT 전류미러를 기본으로 하고 있다. NMOS-NMOS cascode 구조 대신에 npn-NMOS cascode 구조를 사용하여, 출력저항과 출력전압 범위를 증가시켰다. npn 전류 복사 트랜지스터는 입력전류를 출력전류로 복사하고, NMOS 트랜지스터는 출력저항을 증가시켜 정밀한 전류 복사를 가능케 한다. 제안한 전류미러는 광범위 출력전압에서 정밀하게 전류를 복사한다. 5V/16V 0.5um BCD 공정을 이용하여 제작한 칩을 측정하여 검증하였고, $0.3V{\sim}16V$의 출력전압 범위에서 전류 에러는 $-2.5%{\sim}1.0%$이다.

• 제어로봇시스템학회논문지
• /
• 제10권12호
• /
• pp.1256-1263
• /
• 2004

Output feedback passivation problem is studied when the given system is not minimum-phase or does not have relative degree one. Using a parallel connection with an additional dynamics, the authors provide a dynamic output feedback control law which renders the composite system passive. Sufficient conditions are presented under which the composite system is output feedback passive. As an application of the dynamic passivation scheme, a point-to-point control law for a flexible joint robot is presented when only the position measurements are available. This provides an alternative way of replacing the role of the velocity measurements for the proportional-derivative (PD) feedback law. The performance of the proposed control law is illustrated in the simulation studies of a manipulator with three revolute elastic joints.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(2)
• /
• pp.395-398
• /
• 2004

High-linearity voltage-controlled current sources (VCCSs) circuits for wide voltage-controlled oscillator and automatic gun control were proposed. The VCCS consists of emitter follower for voltage input, two common-base amplifier which their emitter connected for current output, and current mirror which connected the two amplifier for large output current. The VCCS used only five transistors and a resistor without an extra bias circuit. Simulation results show that the VCCS has current output range from 0mA to 300mA over the control voltage range from 1V to 4.8V at supply voltage 5V. The linearity error of output current has less than $1.4\%$ over the current range from 0A to 300mA.

• 동력기계공학회지
• /
• 제7권1호
• /
• pp.74-81
• /
• 2003

A system identification is to estimate the mathematical model on the base of input output data and to measure the output in the presence of adequate input for the controlled system. In the traditional system control field, most identification problems have been thought as estimating the unknown modeling parameters on the assumption that the model structures are fixed. In the system identification, it is possible to estimate the true parameter values by the adjusted least squares method in the input output case of no observed noise, and it is possible to estimate the true parameter values by the total least squares method in the input output case with the observed noise. We suggest the adjusted least squares method as a consistent estimation method in the system identification in the case where there is observed noise only in the output. In this paper the adjusted least squares method has been developed from the least squares method and the efficiency of the estimating results was confirmed by the generating data with the computer simulations.

• 수산경영론집
• /
• 제42권1호
• /
• pp.85-96
• /
• 2011

We have done the input-output analysis to see the over all impact of flounder industry of Jeju region on the domestic economy of Korea. To do the input-output analysis, we have constructed the data set for the input-output table by using the existing data set in the "2003 input- output table of Jeju regional area" published by the joint work of Jeju branch of Korea bank and the Jeju Development Institute, together with some raw data provided by Jejudo Marine Fish-Culture Cooperative. We have also produced input coefficient of flounder industry by making flounder industrial sector exogenous, separated from intermediate demand. To summarize our empirical results, the inducement effect of production, value added, and employment of Jeju flounder aquaculture industry are 300 billion won, 116 billion won and 1,800 people respectively. In conclusion, the results of this study suggest flounder industry of Jeju region contributes powerfully to not only Jeju economy but also all over the Korea economy.

• 제어로봇시스템학회논문지
• /
• 제17권9호
• /
• pp.857-862
• /
• 2011

This paper studies the output consensus problem for a class of heterogeneous linear multi-agent systems under a fixed directed communication network. The dynamics, as well as its dimension, of each agent can widely differ from the others, but all the agents are assumed to have the same transfer matrix. In addition, only the system outputs are constrained to be delivered through the network. Under these conditions, we show that the output consensus is reached by a group of identical controllers, which is designed to achieve the state consensus for the homogeneous multi-agent system obtained from the minimal realization of the transfer matrix. Finally, an example is given to demonstrate the proposed result.

• 전자공학회논문지B
• /
• 제33B권2호
• /
• pp.159-167
• /
• 1996

In this paper, a new competitive learning algorithm called dynamic competitive learning (DCL) is presented. DCL is a supervised learning mehtod that dynamically generates output neuraons and nitializes weight vectors from training patterns. It introduces a new parameter called LOG (limit of garde) to decide whether or not an output neuron is created. In other words, if there exist some neurons in the province of LOG that classify the input vector correctly, then DCL adjusts the weight vector for the neuraon which has the minimum grade. Otherwise, it produces a new output neuron using the given input vector. It is largely learning is not limited only to the winner and the output neurons are dynamically generated int he trining process. In addition, the proposed algorithm has a small number of parameters. Which are easy to be determined and applied to the real problems. Experimental results for patterns recognition of remote sensing data and handwritten numeral data indicate the superiority of dCL in comparison to the conventional competitive learning methods.

• 대한전기학회논문지
• /
• 제45권1호
• /
• pp.30-41
• /
• 1996

Current Source(CS) PWM converter is appropriate for the magnet power supply system which requests high power and high precision current control. Input and output filters should be installed to eliminate the current or voltage harmonics caused by the PWM switching for the CS PWM converter. But the input/output filters limit the output DC current range and may destroy the system with filter resonance, and make the system equation more complicated. In this paper, systematic and simple filter design method which considers not only the harmonic attenuation but also the total system good transfer function characteristics in the dc filter. The simulated and experimental results verify the proposed theory. (author). refs., figs., tabs.

• 기본간호학회지
• /
• 제18권2호
• /
• pp.168-176
• /
• 2011

Purpose: The purpose of this study was to identify differences between intake and output balance and body weight changes and to identify factors related to differences in critically ill patients. Methods: The participants for this descriptive correlational study were 65 medical surgical ICU patients. The data were collected from patient medical records. Results: Mean age of the patients was 63.80 years (${\pm}15.21$). Body weight changes for 48 hours averaged 281.54g (${\pm}2210.48$). I&O balance for 48 hours corrected for insensible loss averaged 398.1ml. Differences ranged from 45mL to 7,535mL. In the distribution of absolute difference between body weight change and intake and output balance, only 40% of the patients were within less than 1,000 mL. Factors relating to accurate measure of intake and output were ventilation methods, respiration patterns, and edema status. Conclusion: Although mean values of weight change and I&O balance for all patients were very close, the range of differences was very wide indicating that, for many patients, intake and output is not an appropriate indicator of body fluid balance. Therefore, because of the frequency fever and/or hyperventilation, nurses need to use caution when using intake and output balance only to estimate current body fluid status for critically ill patients.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.85-88
• /
• 2016

90도 하이브리드 커플러에서 두 개의 출력 단자는 일반적으로 90도 위상차의 동일 전력으로 분배된다. 90도 하이브리드 커플러의 두 개의 출력 단자는 입력 단자로부터 전기적 길이가 다르기 때문에 주파수에 따라 서로 다른 출력 기울기를 갖는다. 즉, 동일 전력으로 분배하는 90도 하이브리드 커플러는 중심 주파수에서만 동일한 전력으로 분배되고, 중심 주파수에서 멀어질수록 두 출력 단자에서의 출력 전력은 차이가 크게 발생한다. 본 논문에서는 입력단자와 가까운 거리에 있는 출력단자에 사이에 존재하는 특성임피던스 $35-{\Omega}$의 ${\lambda}/4$ 길이의 선로를 변형시켜 광대역에서 두 개의 출력 단자의 출력 특성이 동일하도록 개선시켰다. 제안된 회로는 ADS(advanced Design System)을 이용하여 살펴보면 두 개의 출력 전력의 차이가 중심주파수 대비 약 20% 대역 이상에서 0.2dB 이내의 값을 가짐을 확인하였다.