• 전기학회논문지P
• /
• 제60권4호
• /
• pp.253-256
• /
• 2011

LEDs have small size, long lifespan, high reliability, low power consumption and high color efficiency. Using such a characteristics, LED Back Light Unit has been studying actively. This paper proposes LED driver to minimize power consumption due to LED forward voltage($V_F$) difference and temperature rising. Compared to conventional LED driver, the proposed driver have excellent stability, brief structure and linear output voltage of DC-DC boost converter. Proposed LED Driver circuit was designed using 0.35um CMOS technology. And its operation was verified through simulation.

• 조명전기설비학회논문지
• /
• 제28권2호
• /
• pp.1-8
• /
• 2014

In this paper, SOA Current and Temperature Driver which consisted of LabVIEW programming part capable of current and temperature transient response pattern design, DAQ module for analog voltage in&out, and voltage to current converting chips has realized. The output current(possible to 3A) from the Driver to SOA was clearly constant without ripple and also showed no variance until 1mA unit for a long time operation. The temperature of TEC took several seconds to reach a set temperature, and were maintained stably within ${\pm}^0.1{\circ}C$ for several hours. The proposed Driver can replace the previous high cost SOA Drivers for wavelength swept lasers fully and provides the convenience of transient response design capability for current and temperature.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.59-60
• /
• 2014

In this paper, development of laser diode driver with 2.5kW rating is presented. The driver is configured with interleaved PFC converter, high frequency full bridge DC-DC converter, two laser diode drivers and ${\mu}$-processor based controller. The system has two laser diode drivers for providing high current and low current. High current driver delivers normal output power of diode; low current driver is for providing critical current of diode for long lifetime. Computer simulation and experiment was performed for verification, as the results, developed driver performs well.

• Tribology and Lubricants
• /
• 제3권2호
• /
• pp.72-80
• /
• 1987

A planocentric torque driver comprises a stationary internal gear with the teeth of a circular concave profile and an external gear of an epitrochoid curve. The contact mechanism of the teeth is examined and analyzed by means of computer simulation. Analyses of load variation on the tooth and strength of appliance is carried out. And the output device is examined. Finally, the design of a 59:1 reduction ratio torque driver is presented.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.222-225
• /
• 2006

A custom-made display driver for an electronic paper is presented, which has high-voltage multilevel output capability and extremely low power consumption. An original level-shifter circuit can effectively reduce the power consumption and the chip area. This driver was implemented to a Quick-Response Liquid Powder Display (QR-LPD) and the image quality and power consumption was estimated.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.301-302
• /
• 2005

A low-power gate driver IC, which can be used for TFT-LCD application, is proposed. The short-circuit current of the output buffer is greatly reduced. An experimental prototype gate driver implemented in a $0.35-{\mu}m$ CMOS technology demonstrates that the power reduction of 16 % is obtained.

• Journal of Power Electronics
• /
• 제17권2호
• /
• pp.315-322
• /
• 2017

LED is a promising new generation of green lighting with the advantages of high efficiency, good optical performance, long lifetime and environmental friendliness. A pulsating current can be used to drive LEDs. However, current with a high peak-to-average ratio is unfavorable for LEDs. A novel control scheme for the ac-dc critical conduction mode (CRM) flyback LED driver is proposed in this paper. By using the input voltage, output voltage and average output current to control the turn-on time of the switch, the peak-to-average ratio of the output current can be reduced. The operation principle is analyzed and an implementation circuit is put forward. Experimental results show the effectiveness of the proposed scheme.

• 산업기술연구
• /
• 제32권A호
• /
• pp.115-118
• /
• 2012

Recently, there are a lot of papers in order to replace the electrolytic capacitor into the film capacitor in output of PFC(Power Factor Correction). However, the film capacitor, which has capacitance of low values, causes a large ripple voltage in output of PFC. The LED drivers are connected series in the output of PFC and affected by the magnitude of voltage ripple. In this paper, we have compared the fixed frequency method with the variable frequency for the constant-current control and propose the control method to avoid the sub-harmonic oscillation in the variable input voltage. An 80W PFC, using film capacitors instead of electrolytic capacitors, and LED driver has been built and compared the fixed frequency control method with the variable frequency control method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.1292-1294
• /
• 1996

The general output circuit for PWM output is pushpull using a complimentary MOSFET. The gate driver coupled directly at gate can switch easy upto a high frequency. However, a high reverse recovery current and parastic components make a oscillation output. This paper analyses this phenomenon and proposes a novel output circuit preventing the oscillation.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 추계학술대회
• /
• pp.224-227
• /
• 2015

일반적으로 자동차드라이버의 스마트폰을 통한 데이터전송은 자동차운전자의 핸드폰은 데이터를 실시간으로 원격데이터 센터에 전송하는 경우에 용량 의존적인 순위를 가지고 있다. 생성되는 진단보드 데이터들은 드라이버의 폰에서의 모바일 진단 어플리케이션에 임시적으로 저장하고, 인터넷에 연결 되었을 때 데이터 센터에 전송한다. 클라우드에서 실행에 방해하는 다른 태스크들이 없는 원격 자동차 어플리케이션 사용방법을 위한 node.js는 모바일 네트워크을 통한 클라우드에서 데이터 저장업무를 다루기 위하여 적합하다. 우리는 외부 어플리케이션으로부터 driver inputs and delivers output을 패스하는 원격 유저와 운용하는 스마트폰 어플리케이션에서 자동차와의 어플리케이션 interface 방법을 사용하는 실시간 분석 안드로이드 어플리케이션 반응을 시뮬레이션 통해 제안된 아키텍쳐의 유효성을 입증한다. 이 논문에서, 우리는 이벤트 루프 접근을 기반으로 하는 이것은 웹서버 구조를 특징으로 하는 원격 자동차 결함 진단 시스템 연구를 제안한다.