• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 추계학술대회
• /
• pp.323-328
• /
• 2004

세계 컨테이너 무역 규모가 연간 $7\%$씩 증가함에 따라 항만 환경이 급격히 변화하고 있다. 이러한 항만의 변화에 성공적으로 대처하기 위해 차세대 항만하역시스템인 LMTT(Linear Motor-based Transfer Technology)의 연구가 진행되고 있다. LMTT용 Shuttle car의 frame부는 컨테이너를 지탱하는 outer beam, frame의 뼈대가 되는 inner beam, 두 beam을 연결시켜 보강하는 cross beam으로 구성되어 있으며, 본 연구에서는 이러한 frame은 설계하기 위하여 cross beam의 개수, 하중 재하 위치 및 inner beam의 위치에 따른 outer beam과의 거리 비 등이 frame의 강도 및 강성에 미치는 영향을 유한요소해석을 통하여 고찰하였다.

• 대한가정학회지
• /
• 제40권5호
• /
• pp.15-24
• /
• 2002

The following research conclusions were made, relative to the experiments of the textiles of fire fighters Protective Clothing. 1. When the body protection efficiency such as the thickness, the strength and heat resistance are considered, Nomex(N) is tuned out the best outer shelf, Gore-tex(KG) the best moisture barrier, and Wool-felt(WC) the best thermal barrier. 2. In the hygienic and sanitary efficiency also, N is turned out the best outer shelf, KG the best moisture barrier, and WC the best thermal barrier in its degree of water resistance, water vapour permeability, and air permeability. 3. In the washing and maintenance efficiency, too. N is turned out the best outer shell, KG the best moisture barrier, and WC the best thermal barrier, being considered the material's rate of contraction, the changing rate of frame resistance, water resistance, and water vapour permeability. 4. When considered the frame resistance against the reflection tape and reflection efficiency, O is the best material for it marks the highest score in the frame resistance and reflective effect.

• 국제초고층학회논문집
• /
• 제3권2호
• /
• pp.99-106
• /
• 2014

This paper presents the determination of the structural system of the Changsha IFC T1 tower with 452 m in architectural height and 440.45 m in structural height. Sensitivity analyses are carried out by varying the location of belt trusses and outriggers. The enhancement of seismic capacity of the outer frame by reasonably adjusting the column size is confirmed based on parametric studies. The results from construction simulation including the non-load effect of structures demonstrate that the deformation of vertical members has little effect on the load-bearing capacity of belt trusses and outriggers. The elastoplastic time-history analysis shows that the overall structure under rare earthquake load remains in an elastic state. The influence of the frame shear ratio and frame overturning moment ratio on the proposed model and equivalent mega column model is investigated. It is found that the frame overturning moment ratio is more applicable for judging the resistance of the outer frame against lateral loads. Comparison is made on the variation of these two effects between a classical frame-core tube-outrigger structure and a structure with diagonal braces between super columns under rare earthquakes. The results indicate that plasticity development of the top core cube of the braced structure may be significantly improved.

• 패션비즈니스
• /
• 제8권2호
• /
• pp.126-140
• /
• 2004

The purpose of this study is to examine the fashion design applying to the hoop, which have become various since 1980. To do this, this study is investigated the origin and the changes of the hoop historically, then classified its types, and finally analyze the collections from 1980 to 2003. The hoop was appeared on the late 15th century. Then in the mid 16th century, bell-shaped farthingale was prevailed, followed by drum-shaped wheel farthingale and hausse-cul in England and France. In the 17th century, slim silhouette was popular, so that the hoop declined gradually. In the 18th century, panier and panier double were introduced which is to make side-expanded skirt silhouette. In the 19th century, crinoline and bustle were created. The hoops applied to modern collections are used various materials, techniques, and forms. It is a main item of historicism which appeared in the trend of post-modernism and the phenomenon of applying underwear to an outer garment like corset. The hoop is adapted into three ways: only with the frame of hoop, wearing a skirt with some parts of the frame exposed on purpose, and wearing a skirt on the frame, thus not showing the frame. Thus, it is thought that wearing a hoop as a frame is used an element of recreation of past fashion, at the same time it was affected by historicism which is a branch of post-modernism. Applying the hoop as an outer garment may be affected by eroticism which changed underwear into an outer wear in postmodernism and deconstructivism.

• Smart Structures and Systems
• /
• 제6권7호
• /
• pp.793-810
• /
• 2010

This paper addresses the control issue of vibratory MEMS-based gyroscopes. This study considers a gyroscope that can be modeled by an inner mass attached to an outer mass by four springs and four dampers. The outer mass itself is attached to the rotating frame by an equal number of springs and dampers. In order to measure the angular rate of the rotating frame, a driving force is applied to the inner mass and the Coriolis force is sensed along the y-direction associated with the outer mass. Due to micro-fabrication imperfections, including anisoelasticity and damping effects, both gyroscopes do not allow accurate measurements, and therefore, it becomes necessary to devise feedback controllers to reduce the effects of such imperfections. Given an ideal gyroscope that meets certain performance specifications, a feedback control strategy is synthesized to reduce the error dynamics between the actual and ideal gyroscopes. For a dual-mass gyroscope, it is demonstrated that the error dynamics are remarkably decreased with the application of four actuators applied to both masses in the x and y directions. It is also shown that it is possible to reduce the error dynamics with only two actuators applied to the outer mass only. Simulation results are presented to prove the efficiency of the proposed control design.

• Steel and Composite Structures
• /
• 제30권3호
• /
• pp.201-215
• /
• 2019

In this research, the behavior of tube-in-tube BRBs (TiTBRBs) has been investigated. In a typical TiTBRB, the yielding core tube is located inside the outer restraining one to dissipate energy through extensive plastic deformation, while the outer restraining tube remains essentially elastic. With the aid of FE analyses, the monotonic and cyclic behavior of the proposed TiTBRBs have been studied as individual brace elements. Subsequently, a detailed finite element model of a representative single span-single story frame equipped with such a TiTBRB has been constructed and both monotonic and cyclic behavior of the proposed TiTBRBs have been explored under the application of the AISC loading protocol at the braced frame level. With the aid of backbone curves derived from the FE analyses, a simplified frame model has been developed and verified through comparison with the results of the detailed FE model. It has been shown that, the simplified model is capable of predicting closely the cyclic behavior of the TiTBRB frame and hence can be used for design purposes. Considering type of connection detail used in a frame, the TiTBRB member which behave satisfactorily at the brace element level under cyclic loading conditions, may suffer global buckling due to the flexural demand exerted from the frame to the brace member at its ends. The proposed TiTBRB suit tubular members of offshore structures and the application of such TiTBRB in a typical offshore platform has been introduced and studied in a single frame level using detailed FE model.

• Structural Engineering and Mechanics
• /
• 제51권1호
• /
• pp.67-88
• /
• 2014

It is shown that topology optimization is a valuable tool for the design of bridge girders. This paper is a follow-up to (Kuty${\l}$owski and Rasiak 2014) and it includes an analysis of truss members' outer dimensions dictated by the standards. Moreover, a frame bridge girder mapped from a selected topology is compared with a typical frame girder on the basis of (Kuty${\l}$owski and Rasiak 2014). The analysis shows that topology optimization by means of the proposed algorithm yields a topology from which one can map a frame bridge girder requiring less material for its construction than the typical frame girder currently used in bridge construction.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
• /
• pp.965-968
• /
• 2003

This paper describes the PWM-VSI controller of three-phase UPS system using stationary reference frame. This controller meets the specification the UPS inverter output voltage even under the unbalanced or nonlinear load. This controller is also constructed with duble control loop of the outer voltage control loop and the inner current control loop. For the fast response of the output voltage control, yhr inner current control loop of the capacitor current os used. To get the good property against overshoot, the If controller us used. The outer voltage controller is designed with P controller and the high gain transfer function is used for the zero steady state error. All control gains of both controller is designed base on the CDM method.

• 한국실내디자인학회논문집
• /
• 제21호
• /
• pp.107-113
• /
• 1999

The purpose of this study is to suggest the materials for developing the new house style by analysing the space characteristics of wood frame houses in suburbs of Seoul. For this, we analysed 45 drawings(site plan, floor plan, elevation, section) that were designed by MICHOO, WOOD-LAND, STUGA and CHOWONJUTECK company etc. The space design characteristics that we found are as follows; 1. The wood is fragile to humidity. Therefore this characteristic is especially considered in designing the space of bathroom and utility room. 2. It is the merit of wood frame house that inner space can be designed variously by using spilt-level and the slope of roof. 3.The public space and private space are completely separated in most cases and the stair is located in the middle of house. This structure of house is short of horizontal openness. Instead, most houses gets vertical openness by making second floor on the living room opev. 4. In wood frame house as the rural house, the outer space is well used by setting up deck and balcony. The outer spaces like deck and balcony are usually used as a part of life space in connected with living room, dining room, master bed room and family room. 5. The public spaces like kitchen, living room, dining room and family room are considered so important in design that those are arranged in front in order to have good outlook and directiov.

• 한국시조학회지:시조학논총
• /
• 제21집
• /
• pp.143-164
• /
• 2004

이 논문은 <강호사시가>가 한 주제를 형상화하는 데 네 계절의 특징을 담고 있는 서로 다른 글감들을 사용하였지만, 내용의 일관된 통일성을 유지한 연시조이며, 이 통일성 유지는 하나의 일정한 틀을 사용한 데 근거하였음을 해명하려고 한 것이다. 그 일정한 틀은 겉틀과 속틀로 나누었다. 겉틀은 네 작품에 공통된 표현 부분이다. 그 내용은 '화자의 거처(강호)'-'화자(이 몸)'$\cdot$'화자와 임금의 관계(군은)' 및 '강호의 상태(강호에 (가)이 드니)', '화자의 상태(이 몸이 (라)히옴)'를 제시한 것이다. 그리고 초장의 '강호에 (가)이 드니'를 구문의 생성 조건의 측면에서 분석하여 표현의 압축과 간결함을 지적하고, 종장의 '역군은이샷다'를 구문의 생성 의도의 측면에서 분석하여 화자 개인 차원의 삶에 대한 만족을 표출한 것임을 설명하고, 이 삶의 만족을 사회적 차원의 태평성대로 확장할 수 있는지에 대하여 문제제기를 하였다. 속틀은 작품 내용의 세부 짜임이다. 이에 대해서는 네 작품을 초$\cdot$중$\cdot$종장 각각으로 묶어 분석한 다음, 네 작품의 공유된 짜임을 설명하고, 각각의 내용 분석을 통하여 곁틀에서 다룬 <강호사시가>의 내용이 갖는 특성을 해명하였다. 네 작품의 초$\cdot$중$\cdot$종장을 각각 하나로 묶어 종합 분석하기 위하여 지표기능과 제시기능을 설정하여 그 내용의 짜임을 설명하였다. 초장은 공통으로 네 계절의 흥취를 표현한 것이며, 중장은 지표기능 어휘인 '화자'가 생략되어 제시기능 구절만으로 이루어졌으며, 초장의 흥취를 행위나 상태로 구체적으로 제시하였다. 종장은 중장과 연결하여 함축적 표현이며,사적인 삶과 공적인 가치관(군신유의)의 관계에서 공적인 가치관으로 사적인 삶을 보장받으려는 의도를 내포한 것이다. 이를 종합하면, <강호사시가>의 속틀의 짜임은 '계절의 제시'$\to$'계절에 대한 발흥'$\to$'계절의 즐김 행위'$\to$'(심적$\cdot$신체적) 평안'으로 전개된다. 문맥의 흐름에서 초장은 중장의 단서가 되며, 중장은 초장에 대한 반응이며, 종장은 중장의 응축으로서 평가라는 성격을 가지고 있다. 그리고 속틀의 짜임에 '감군은'이 포함되면 곁틀의 짜임을 확인할 수 있다. 끝으로, 작자가 작품의 본지를 개인의 평안에 둔 것처럼 꾸몄으나, 본래의 발상은 임금의 치적(태평성대)을 송축하려는 것이라고 결론하였다.