• Steel and Composite Structures
• /
• 제26권5호
• /
• pp.533-547
• /
• 2018

In this paper the time-dependent creep analysis of a thick-walled FG cylinder with finite length subjected to axisymmetric mechanical and thermal loads are presented. First order shear deformation theory (FSDT) is used for description of displacement components. Inner and outer temperatures and outer pressure are considered as thermo-mechanical loadings. Both thermal and mechanical loadings are assumed variable along the axial direction using the sinusoidal distribution. To find temperature distribution, two dimensional heat transfer equation is solved using the required boundary conditions. The energy method and Euler equations are employed to reach final governing equations of the cylinder. After determination of elastic stresses and strains, the creep analysis can be performed based on the Yang method. The results of this research indicate that the boundaries have important effects on the responses of the cylinder. The effect of important parameters of this analysis such as variable loading, non-homogeneous index of functionally graded materials and time of creep is studied on the behaviors of the cylinder.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.705-706
• /
• 2008

When heat generated inside a large factory building is not discharged due to a stagnant flow, the working environment of workers becomes worse and the cooling of high-temperature products such as hot-rolling coils is delayed. To investigate the natural ventilation inside a large factory building, experimental studies were carried out using wind-tunnel tests. The scale-down factory building models were placed in an atmospheric boundary layer (ABL) and the mean and fluctuating velocity fields were measured using a particle image velocimetry (PIV) technique. For the prototype factory model, the outdoor air is only entrained into the factory building through the one-third open windward wall, and stagnant flow is formed in the rear part of the target area. In order to improve the indoor ventilation environment of the factory building, three different louver-type ventilators were attached at the upper one-third open windward wall of the factory model. Among the three louver ventilators tested in this study, the ventilator model #3 with the outer louver (${\theta}_o$ = 90$^{\circ}$) and the inner louver (${\theta}_i$ = -70$^{\circ}$) was found to improve the natural ventilation inside the factory building model effectively. The flow rate of the entrained air was increased with aligning the outer louver blades with the oncoming wind and guiding the entrained air down to the ground surface with elongated inner louver blades.

• Journal of Information Processing Systems
• /
• 제1권1호
• /
• pp.36-40
• /
• 2005

TRISO (Tri-Isotropic)-coated fuel particle is widely applied due to its higher stability at high temperature and its efficient retention capability for fission products in the HTGR (high temperature gas-cooled reactor), one of the highly efficient Generation IV reactors. The typical ball-type TRISO-coated fuel particle with a diameter of about 1 mm is composed of a nuclear fuel particle as a kernel and of outer coating layers. The coating layers consist of a buffer PyC, inner PyC, SiC, and outer PyC layer. In this study, a digital image processing algorithm is proposed to automatically measure the thickness of the coating layers. An FBP (filtered backprojection) algorithm was applied to reconstruct the CT image using virtual X-ray radiographic images for a simulated TRISO-coated fuel particle. The automatic measurement algorithm was developed to measure the coating thickness for the reconstructed image with noises. The boundary lines were automatically detected, then the coating thickness was circularly by the algorithm. The simulation result showed that the measurement error rate was less than 1.4%.

• International Journal of Costume and Fashion
• /
• 제5권1호
• /
• pp.14-25
• /
• 2005

The objective of this study is to understand bodily extension and identity in contemporary fashion art through the analysis of 'the fashion acting on the body' among the fashion theory excluding body and the conspicuous works on the opening and covering images as a fashion art as a body-space'. This study also investigated identity problems where there are poles apart in opening and closure their bodies and body-space in which its clothing types were distorted by being de-bodilization out of the traditional and ideological expression method in contemporary fashion art from a opening and closure point of view. Image of opening and closure among body-space in fashion art can be classified into opposing structure of opening and closure. Destroying the boundary between bodily opening and closure for a primary function of clothing and dismantling the role and boundary between body and clothing, opening body-space in appearance as a reemergence of body image or the border between inner and outer are being ambiguous because of transparent material. Being representative work of this study opening body-space was expressed as an opening space image using transparency. On the contrary, closure body-space was isolated from external environment and confined in the certain space, which could limit or restraint body- action. Excluding boundary of body and clothing on the whole or in part, boundary of work becomes body-space. However, these were appeared to be a work inducing unlimited curiosity and meaning from the audience. The interpretation of artistic and body-space in fashion art are indicating the role and function of the fashion art exceeding the suggestible dimensions in the every day life of fashion. The body-space of fashion art showing similar aspect of body art today could be understood that it is substituted into an metaphorical, critical space by seeing it as a symbol system connected with social space. Therefore, contemporary fashion art should be interpreted as an equivocal space looking at the body-space with open mind.

• 대한기계학회논문집B
• /
• 제25권8호
• /
• pp.1103-1112
• /
• 2001

The effect of pressure gradients on the hairpin structures in three different turbulent boundary layers (ZPG : Re(sub)$\theta$=910, FPG : Re(sub)$\theta$=575, APG : Re(sub)$\theta$=1290) has been examined with instantaneous velocity fields obtained in streamwise-wall-normal planes using PIV (particle image velocimetry) method. In the outer layer hairpin vortices occur in streamwise-aligned packets that propagate with small velocity dispersion. The signature pattern of the hairpin consists of a spanwise vortex core located above a region of strong second quadrant fluctuation (u<0 and v>0 : Q2 event) is clearly observed. The formation of packets explains the occurrence of multiple VITA events in turbulent burst. Noticeable differences are found in the average inclination angles of hairpin vortex packets which are 45$^{\circ}$, 35.7$^{\circ}$, and 51.9$^{\circ}$in the case of ZPG, FPG and APG, respectively. It is found that the large, time-varying, irregularly shaped zones with nearly constant streamwise momentum exist throughout the boundary layer. Within the interior of the envelope the spatial coherence between the velocity fields induced by the individual vortices leads to strongly retarded streamwise momentum, explaining the zones of uniform momentum. The formation of the uniform momentum zone is remarkably different with respect to the pressure gradients especially in the logarithmic layer.

• 한국해양환경ㆍ에너지학회지
• /
• 제4권1호
• /
• pp.14-23
• /
• 2001

영일만의 해수순환에 영향을 미치는 조석잔차류와 형산강 하천수의 거동 특성을 규명하기 위하여 2차원 수치모형실험을 수행하였다. 수치모형실험의 결과는 기존의 관측자료들과 잘 일치하였으며, 영일만의 북쪽 달만갑 연안으로부터 포항신항을 거쳐 장기갑 연안을 따라 외해로 빠져나가는 조석잔차류 거동을 잘 재현하였다. 영일만의 잔차류에 대한 조류의 영향은 미약하며 파랑이나 바람에 의한 영향이 크지만 영일만의 전형적인 조석잔차류의 거동에 미치는 형산강 하천수의 역할은 지배적인 것으로 나타났다.

• 정보처리학회논문지A
• /
• 제14A권3호
• /
• pp.133-140
• /
• 2007

SWBF(shrink-wrapped boundary face) 알고리즘은 조직되지 않은 3차원 측정점으로부터 표면을 재구성하기 위해 최근에 제안된 방법이다. 본 논문에서는 SWBF 알고리즘의 표면 중복문제를 제기하고, 이를 해결하기 위한 개선된 표면 재구성 방법을 제안한다. 제안된 방법은 경계셀이 아닌 모든 셀들을 내부셀과 외부셀로 구분하고, 개선된 경계면의 정의를 이용해 초기메쉬에서 표면의 중복이 발생하지 않도록 하였다. 또한, 측정 방향에 따라 표면 샘플링의 조밀도가 차이가 나는 일반적인 3차원 스캐너로부터 추출된 데이터의 처리를 위해 셀 영상에서 2차원 연결성을 정의하여 사용하였다. 실험을 통해 제안된 방법이 SWBF 알고리즘의 표면중복문제를 극복하는데 매우 유용함을 알 수 있었다.

• 한국추진공학회지
• /
• 제21권3호
• /
• pp.49-55
• /
• 2017

가스터빈엔진의 성능시험을 위한 엔진 입구덕트를 1D 기법으로 Sizing 하였으며, 압축기 입구유동측정면(AIP, Aerodynamic interface plane)에서 경계층 두께를 최소화하고, 코어부 마하수분포가 균일하도록 설계하였다. 노즈콘 형상은 Haack-series 모델을 적용하고, 덕트 안쪽과 바깥쪽 면적변화율이 동일하도록 입구덕트 채널 바깥반경($r_o$)를 결정하여 설계목적을 구현하고자 하였으며, 이러한 형상이 설계목표에 부합하는지 확인하기 위하여 CFD를 수행하였다. AIP면에서 정압력분포는 최대값과 최소값 차이가 0.16% 이었으며, 마하수분포에서 경계층은 덕트반경 길의 2% 이내로 설계목표를 만족하였다. 이때 균일유동 코어부는 채널높이의 95% 이상이었다. 또한 입구유동의 전온도를 측정하기 위한 키엘 전 온도레이크 위치는 온도 회복계수가 최대화 되도록 마하수가 0.1 이하 지역인 노즈콘 전방 100 mm 이내이어야 함을 확인하였다.

• 대한기계학회논문집B
• /
• 제37권6호
• /
• pp.567-575
• /
• 2013

외부경계층 수직 날의 마찰저항 저감 기구를 규명하기 위하여 회류수조에서 시간분해 입자영상유속계로 측정된 비정상 유동장에 POD 분석을 실시하였다. 최근의 PIV 결과에서는 수직날 평면 및 수직날 사이 평면에서 각각 2.73%, 7.95%의 마찰저항 저감효과가 발견되었다. 본 연구에서는 수직날 배열이 난류조직구조에 미치는 영향을 POD 방법을 통하여 분석하였다. 난류유동의 조직적인 와구조가 수직날에 의하여 절단, 변형되고 비정상 거동이 난류경계층에서의 마찰저항 저감 기구와 밀접하게 관련된 것으로 관찰되었다.

• 수산해양기술연구
• /
• 제31권4호
• /
• pp.423-434
• /
• 1995

수산업분야의 생력화와 조업공정의 단축으로 새로운 활로를 개척할 수 있는 방안으로 보조기계들의 유압화 및 대형화에 사용되는 후벽 유압실린더는 작동응력 거동의 분석과 파손예측의 정확성이 강구되어야만 기계고장으로 인한 해난사고의 개연성을 미연에 감소시킬 수 있다. 균일한 내압을 받는 대형선박용 유압실린더를 수치해석적 방법인 경계요소법을 사용하여 각종 응력 해석의 시도는 엄밀해나 유한요소법의 결과와 비교적 양호하게 일치하고 있다. 축대칭 형상에 대한 반경방향 응력이나 원주방향 응력의 BEM 해석결과는 단일절점과 이중절점 모두 최대 25MPa의 압축응력이나 최대 52MPa의 인장응력이 작용하고 있으므로 재료의 허용응력내에서 작동하고 있음을 알 수 있다. 이중절점 형상함수(double node shape function)를 사용하여 원통형 형상의 구조물에 대한 수치계산 결과의 정확도를 높힐수 있었으며 입력데이터의 증가는 오차감소에 기여하였으나 프로그램의 실행시간(run-time)을 증가시켰다. 코너에서의 트랙션벡터의 불연속 현상을 해결하기 위한 이중절점의 사용은 영역 내부해의 안정성을 확보하였고 경계부근에서의 내부해의 발산을 제거하기 위한 이중지수형 적분법 사용은 해석결과의 오차를 효과적으로 감소시켰다.