• Journal of Korea Multimedia Society
• /
• v.23 no.8
• /
• pp.1088-1098
• /
• 2020

This paper proposes an obstacle avoidance method using a depth polar grid. Depth information is a crucial factor for determining the safe path for collision-free navigation of unmanned aerial vehicles (UAVs) as it can perceive the distance to the obstacles effectively. However, the existing depth-camera-based approaches for obstacle avoidance require computational y expensive path planning algorithms. We propose a simple navigation method using the polar-grid of the depth information obtained from the camera with narrow field-of-view(FOV). The effectiveness of the approach was validated by a series of experiments using software-in-the-loop simulation in a realistic outdoor environment. The experimental results show that the proposed approach successfully avoids obstacles using a single depth camera with limited FOV.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.09a
• /
• pp.240-243
• /
• 2003

In this study, as the preliminary step far developing a multi-purpose Autonomous robust carrier mobile robot to transport trolleys or heavy goods and serve as robotic nursing assistant in hospital wards. The aim of this paper is to present the use of multi-sensor data fusion such as sonar, IR sensor for map-building mobile robot to navigate, and presents an experimental mobile robot designed to operate autonomously within both indoor and outdoor environments. Smart sensory systems are crucial for successful autonomous systems. We will give an explanation for the robot system architecture designed and implemented in this study and a short review of existing techniques, since there exist several recent thorough books and review paper on this paper. It is first dealt with the general principle of the navigation and guidance architecture, then the detailed functions recognizing environments updated, obstacle detection and motion assessment, with the first results from the simulations run.

• Journal of the Korean Professional Engineers Association
• /
• v.41 no.5
• /
• pp.55-58
• /
• 2008

GPS is the global Navigation Satellite System which is developed by the United States Department of Defense as an abbreviation of the Global Positioning System. The GPS uses a constellation of 24 Medium Earth Orbit satellites that transmit precise microwave signals, that enable GPS receivers to determine their location, speed, direction, and time. Following, the shooting down of Korean Air Lines Flight 007 in 1983. President Ronald Reagan issued a directive making the system available free for civilian use as a common good. Since then, GPS has become a widely used aid to navigation worldwide, and a useful tool for map-making, land surveying, commerce, scientific uses, and hobbies such as geocaching. GPS also provides a precise time reference used in many applications including scientific study of earthquakes, and synchronization of telecommunications networks.

• Journal of Positioning, Navigation, and Timing
• /
• v.3 no.2
• /
• pp.63-69
• /
• 2014

In this study, due to the necessity of the equipment for inspecting an anti-jamming function depending on the expansion of the development of anti-jamming systems, an array antenna hood that can inspect the anti-jamming function of an anti-jamming system while being installed at the system was designed and manufactured. The manufactured array antenna hood plays a role in radiating GNSS signals and jamming signals. Based on an experiment, it was demonstrated that using a near-field radiation method, the manufactured array antenna hood could be used for examining the normal operation of an anti-jamming system function in outdoor or indoor environments rather than an anechoic chamber.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.10
• /
• pp.975-981
• /
• 2006

This paper shows a feasibility analysis results on RFID for car positioning system. Usually, a car navigation is mainly based on GPS combined with map-matching. However, in the case of poor visibility of satellites, GPS can not supply accurate position information continuously. In recent years, RFID has been considered to be one of key technologies in positioning and localization area. But its application and research results in the area of vehicular positioning are not popular. RFID system consists of tag, reader, antenna and software such as drivers and middleware. The main function of RFID system in a vehicular positioning is to retrieve ID recorded position information from tags which set on the center of road. We propose a positioning method for vehicles using RFID and we present some indoor and outdoor experiment results to show that the proposed method is available in vehicle operational environments.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.279-283
• /
• 2006

The GPS receiver developed by KARI for the satellite launch vehicle should operate under severe dynamic environments such as high acceleration and jerk. Several terrestrial tests including the outdoor centrifuge test are planed in order to verify performances of the GPS receiver before flight. This paper deals with preliminary test results of the GPS receiver using a GPS signal generator before the centrifuge test that is a performance test of the GPS receiver using live GPS satellite signals. Test methods of the GPS receiver for the satellite launch vehicle under high centripetal acceleration and jerk utilizing a GPS signal generator are described. The simulation results are also analyzed in this paper.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.4
• /
• pp.359-364
• /
• 2012

Real-Time Traversability should be analyzed from the equiped sensors' data in real time for autonomous outdoor navigation. However, it is difficult to find out such traversability that considers the terrain roughness and the vehicle dynamics especially in case of skid type vehicle. The traversability based on real time dynamic analysis was proposed to solve such problem but in navigation with strait driving path. To adapt the method into the navigation with curved driving path, a path following controller should be incorporated into the dynamic model even though it cause the real time problem. In this paper, a dynamic model is proposed to solve the real time problem in the traversability analysis based on real time dynamic simualtion. The dynamic model contains the control dummy which is connected to the vehicle body with a universal joint to follow the curved path without controller. Simulation and experimental results on $6{\times}6$ articulated unmanned ground vehicle demonstrate the method's effectiveness and applicability into the traversability analysis on terrain with bumps.

• Journal of Digital Contents Society
• /
• v.18 no.1
• /
• pp.109-114
• /
• 2017

In our modern society, the utilization of the advanced drone which is capable of performing variety of tasks has been gradually increasing. In this paper, we present an application, similar to the prototype "Skycall" that had been introduced in the MIT Senseable City. To assess this concept, we have implemented a prototype of drone-based pedestrian navigation depending on the Android smartphone. Our system is not only able to guide the user in a very complicated place, where buildings are compacted, but also to block unauthorized visitors from accessing the facilities. And we discuss some problems we found and suggest the direction to address them.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.11
• /
• pp.1068-1073
• /
• 2010

When a robot navigates in an outdoor environment, a curb or a sidewalk separated from the road can be used as a robust feature. However, most algorithms could detect the curb only in the straight road, and could not detect highly curved corners, ramps, and so on. This paper proposes an algorithm which enables the robot to detect and follow the curbs in various types of roads. In the proposed method, the robot tilts a laser scanner and computes the error between the predicted and the measured distances to the road in front of the robot. Based on this error, the curbs at corners and curves can be classified. It is also difficult to detect a curb near a ramp because of its low height. In this case, the robot also tilts a laser scanner to detect the curb beyond the ramp. Once the robot classifies the road into the curve, corner, ramp, the robot selects the proper navigation strategies depending on the classified road types and is able to continue to detect and follow the curb. The results of a series of experiments show that the robot can stably detect and follows the curb in curves, corners and ramps as well as the straight road.

• Journal of Advanced Navigation Technology
• /
• v.23 no.5
• /
• pp.473-480
• /
• 2019

The smart home is a technology that can monitor and control by connecting everything to a communication network in various fields such as home appliances, energy consumers, and security devices. The Smart home is developing not only automatic control but also learning situation and user's taste and providing the result accordingly. This paper proposes a model that can provide a comfortable indoor environment control service for the user's characteristics by detecting the user's behavior as well as the automatic remote control service. The whole system consists of ESP 8266 with sensor and Wi-Fi, Firebase as a real-time database, and a smartphone application. This model is divided into functions such as learning mode when the home appliance is operated, learning control through learning results, and automatic ventilation using indoor and outdoor sensor values. The study used moving averages for temperature and humidity in the control of home appliances such as air conditioners, humidifiers and air purifiers. This system can provide higher quality service by analyzing and predicting user's characteristics through various machine learning and deep learning.