• Food Science and Preservation
• /
• v.25 no.1
• /
• pp.62-70
• /
• 2018

This study investigates, the physicochemical characteristics of Sengmaksan (SM) prepared with Liriope platyphylla (LP) that had been roasted for different times (0, 30, 60, and 90 min, denoted as S-0, S-30, S-60, and S-90, respectively) The Hunter's color values such as lightness (L), redness (a), and yellowness (b) were the highest in S-0, while the lowest was found in S-90. The amount of soluble solid and reducing sugar content of S-60 were higher than the others. None of the samples exhibit significant differences in, their pH and acidity. The total content of phenolic compounds increased with the LP roasting time, but the total flavonoid and total anthocyanin contents of the SM decreased at the same time. The total ginsenoside (Ro, Rb2, Re, Rf, Rg1, Rg2, Rg3, Rh1, and Rh2) content did not show significant differences. The DPPH and ABTS radical scavenging activities increased according to the concentration, as well as with the LP roasting time. The ferric reducing antioxidant power (FRAP) showed trends similar to the radical scavenging activity, but it was more sensitive to the LP roasting time. From these results, the active ingredient in S-60 was higher, and the antioxidant activities of SM increased along with the roasting time of LP.

• Korean Journal of Soil Science and Fertilizer
• /
• v.22 no.4
• /
• pp.257-264
• /
• 1989

In order to study spatial variability of soil chemical properties across the land-partitioned boundary on Hwadong silt clay loam soil (Fine clayey, mixed, mesic family of Aquic Hapludalfs) in the experimental fie ld of the wheat and Barley Research Institute in Suwon, all measured data were analyzed by means of kriging, fractile diagram, smooth frequency distribution, and autocorrelation. Sampling for soil chemical property analysis was made at 225 intersections of 15x 15 grid with 10m interval from three soil depths (0-10cm, 25-35cm, 50-60cm) in the seven patitioned fields. 1. The coefficient of variance (CV) of various chemical properties varied from 5.4 to 72.7%. Soil pH was classified into the low variation group with CV smaller than 10%, while the other chemical properties belonged to the medium variation group with C.V. between 10 and 100% 2. The approximate number of soil samples for the determination of various chemical properties with error smaller than 10% were two for pH, ten for CEC, 15 for exchangeable Ca, 32 for total nitrogen content, 39 for exchangeable Mg, 40 for exchangeable K, 61 for exchangeable Na, 82 for organic matter content, 212 for available phosphate,. 3. Smooth frequency distribution and fractile diagram showed that available phosphate was in log-normal distribution while others were in normal distribution. 4. Serial correlation analysis revaled that the soil chemical properties had spatial dependence between two nearest neighbouring grid points. Autocorrelation analysis of chemcial properties measured between the serial grid points in the direction of south to north following land-partitioned boundary showed that the zone of influence showing stationarity ranged from 20 to 50m. In the direction of east to west accross land-partitioned boundary, the autocorrelogram of many chemical properies showed peaks with the periodic interval of 30m, which were similar to the partitioned land width. This reveals that the land-partitioned boundary causes soil variability.

• Korean Journal of Soil Science and Fertilizer
• /
• v.4 no.1
• /
• pp.79-85
• /
• 1971

The rice variety, Kwanok, was reared in the water, land and salty beds and transplanted to the reclaimed soil area having an average of 0.48% salt concentration 0.67% at the end of April Two levels of $NH_3$-N and urea-N with 6 treatments were used. The effect of each treatment was observed. The plant height of the land bed seedlings at transplanting stage was short but the dry-weight/plant-height ratio was large, and the rooting ability vigorous remarkably after transplantation in the salty area. The total carbohydrate content of the stem part was markedly larger in the land bed seedlings than the others and the C/N ratio was accordingly greater. This tendency was observed through the last rooting stage. In the salty nutrient solution, the roots of salty bed seedlings showed high respiratory activity. The activity of the land bed seedlings did not decreased in the hypertonic solution as much as the water bed seedlings. There was no difference in the effect of fertilization on the rough rice yield between ammonium sulphate and urea. The cultural practices with the land and salty bed seedlings increased the rough rice yields by 33% and 22% respectively, compared with the yields of the water bed Seedlings. The number of panicles, panicle weight and the number of grains per panicle were much greater from the rice plant grown by the land bed seedlings than from the other bed seedlings.

• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.4
• /
• pp.429-439
• /
• 1999

Potentiometric titration data were collected for some humic acids purified from Korean upland and paddy soils over a range of pH (3.0 - 11.0) with $NaNO_3$ background electrolyte concentrations (0.01, 0.10, 0.50 and 1.00 M). The data were applied to model A and V which included both intrinsic heterogeneity of humic materials and electrostatic interaction influences on binding sites. The elemental analysis were conducted for various type of humic samples. The $E_4/E_6$ ratio proposed negative correlation with the total carboxyl groups ($r^2$= 0.9988). The charge ($cmol_c\;kg^{-1}$) on the humic acids became more negative as the ionic strength increased. In both continuous and batch titrations, the ionic strength effect was greater in Namweon series (pH 6.39) than others at pH 5.00. The effect of ionic strength on surface charge appears to be greater in batch titrations. This could suggest that continuous titrations do not represent an equilibrium state and the effects of electrolyte concentration was not fully realized during the course of titrations. Both models described experimental data obtained from continuous and batch titrations well over a range of ionic strengths. Model A is more simpler than model V but adaptes more fitted parameters. Thus, the observed change in apparent binding constants with surface charge is regarded solely due to electrostatic influences rather than functional group heterogeneity. However, Model V is more mechanistically realistic in a number of discrete ligand binding sites.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.6
• /
• pp.339-344
• /
• 2006

A lot of organic wastes have been produced from diverse industries, they must be tested by the regulation of fertilizer control act if reuse the organic wastes for agricultural utilization. The regulation has had only two criteria; the content of organic matter and 8 heavy metals. This study was conducted to evaluation trace element (boron, cobalt, molybdenum, and selenium) and distribution of organic compounds with different classification for complement the regulation in 16 organic waste materials(62 samples) collected from different regions and industries. Contents of boron(leather industry sludge, $154.2mg\;kg^{-1}$; food company sludge, $57.1mg\;kg^{-1}$), cobalt(industrial area sewage sludge, $95.2mg\;kg^{-1}$; metropolitan sewage sludge, $22.9mg\;kg^{-1}$), molybdenum(metropolitan sewage sludge, $40.1mg\;kg^{-1}$; food company sludge, $16.8mg\;kg^{-1}$), selenium (fiber industry sludge, $28.1mg\;kg^{-1}$; leather industry sludge, $16.9mg\;kg^{-1}$; food company sludge, $15.9mg\;kg^{-1}$) were highest compare to the other organic wastes. Total PAHs contents were the highest in paper-mill manufacture($3,462ug\;kg^{-1}$), and among the 16 PAHs, naphthalene, phenanthrene, pyrene, fluoroanthene, Anthracene and acenaphthene were detected more clearly than others in all kinds of organic resources.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.2
• /
• pp.108-117
• /
• 2005

Pharmaceutical byproduct sludge and cosmetic industry wastewater sludge can be used as a raw material of compost. Effects of three types of pharmaceutical byproduct sludge and one type of cosmetic industry wastewater sludge on soil properties and red pepper growth were investigated in a field based concrete pot ($2{\times}2m$). These sludges and pig manure ($5Mg\;ha^{-1}$, dry basis) were incorporated into the upper of loam soil 30 days prior to transplanting red pepper. Changes in soil properties and contents of heavy metals and toxic organic compounds in soil and plant were measured. And also plant growth measurement and bioassay of soil phytotoxicity were included. Contents of heavy metals were increased in the soils treated with the sludges. Plant growth in the sludge treatments were mostly inferior to that of NPK treatment, especially in early stage. Content of N in plant was lower in all sludge treatments at early and middle growth stages, and it was especially caused by characteristics and concentration of nitrogen and organic matter of sludges. Total yield of red pepper was highest in the NPK treatment and followed by pharmaceutical sludge 3, pig manure, pharmaceutical sludge 1, and pharmaceutical sludge 2, and the yield of cosmetic sludge treatment was considerably lower than others. HEM and PAHs contents in soil of cosmetic sludge treatment were $4.80mg\;kg^{-1}$ and $2,263.2{\mu}g\;kg^{-1}$, respectively. Root elongation of lettuce exposed to the water extract of soil treated with cosmetic sludge was about 20% of that found in the test with soil extract of non fertilization treatment. At present, raw materials of compost were authorized according to the contents of organic matter, heavy metals and product processing. Toxic organic compounds analysis and bioassay would be helpful for authorization and assessment of suitability of raw materials of compost.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.2
• /
• pp.101-107
• /
• 2005

To investigate the effect of pyroligneous acid liquor (PAL) on the maturity of pig manure compost, PAL was treated to the compost piles. The treatments included applications of 100 and 300 times diluted PAL in addition to the control. The compost piles were stirred in three times at the 1st, 10th, and 25th day of composting. Temperature in the compost pile of control treatment increased from 28 to $60^{\circ}C$ within 10 days and remained nearly at the level until 30th day, then it began to decrease. On the other hand, temperature of the PAL-100 and PAL-300 treatments reached 65 to $70^{\circ}C$ within 8 days and became stabilized until 30th day, then the temperature decreased to about $28^{\circ}C$. However, the temperature of control was stabilized approximately at the 40th day. Initially, the pH of control treatment dropped from 8.2 to slightly above pH 8.0 during 4th day, but that of the PAL-100 treatment declined to 7.8. Among treatments, pH value of PAL-100 treatment was the lowest, which was about 7.3 after becoming stabilization. Also the germination index (GI) was increased at all treatments. The C/N ratio range of PAL-100 treatment was better balanced than others and was at 24.3. Moreover the round paper chromatogram of extracted solution of compost of PAL-100 treatment was the sharpest and clearest among treatments. The GI values of control, PAL-100, and PAL-300 in 60 days of composting were about 108, 120, and 118 in germination test using chinese cabbage, respectively. It can be concluded that the addition of diluted PAL solution is effective in composting of pig manure.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.2
• /
• pp.92-100
• /
• 2005

This study was conducted to find suitable methods for screening organic resources useful for compost. Twenty-seven industrial and domestic sludges were collected from various cities and industrial areas. Contents of organic matters in the sludges were in the range of 79.3-98.0%, and the contents were much higher than the regulation level (60%) for raw materials of compost. Contents of total nitrogen were in the range of 0.8-2.6%. Contents of Fe and Al were very high. Content of HEM was highest in textile sludge ($257mg\;kg^{-1}$) and the contents in the others were in the range of $12.6-90.3mg\;kg^{-1}$. Content of PAHs was lowest in food sludge ($739.1{\mu}g\;kg^{-1}$ and pulp-mill sludge had the highest PAHs content ($3461.8{\mu}g\;kg^{-1}$). $Microtox^{(R)}$ $EC_{50}$ values were higher in the sludges which were classified as a possible material in composting after analysis and investigation. Lettuce root elongation and $EC_{50}$ values were relatively lower in pulp-mill sludge, sewage sludge 3 (Large city), food sludge and leather sludge. Therefore, mineral nutrients, heavy metals, organic compounds (HEM, PAHs, PCBs), and bioassay ($Microtox^{(R)}$ $EC_{50}$, Relative root elongation test) are recommended to be included in the screening system of raw material of compost in addition to the current regulation with organic matter and 8 heavy metals.

• Journal of Sericultural and Entomological Science
• /
• v.22 no.1
• /
• pp.26-45
• /
• 1980

Silk protein is synthesized in the silkgland of silkworm, Bombyx mori L. It is evident that silk productivity is one of the high heritable characters from the genetical aspects. It is also changed with the environmental circumstances. With this regard, this paper dealt with the varietal patterns of silkgland development and the factors concerning to the silk productivity of silkgland of silkworm by the synthesis of nucleic acids, profiles of amino acids and histological basis, using the eight parent silkworm varieties and their F$_1$ hybrids. 1. The weight of silkgland per larva increased proportionally in the F$_1$ hybrids which were crossed between longer silk yielding varieties. The silk content to the weight of the silkgland was higher in the longer silk yielding varieties than that in the shorter silk yielding varieties. 2. It was observed that the morphological changes of nuclei took place in the posterior silkgland cells with the larval development of the 5th instar. In varietal aspect, Jam 107 and Jam 108, longer silk yielding varieties, showed more branches in nuclei than the $N_2$ and $C_{60}$ which were shorter yielding ones. 3. It was observed that there was a high correlation between RNA content per unit weight of silkgland on the 6th day stage of 5th instar and silk productivity both in the parents and their F$_1$ hybrids. 4. RNA and DNA synthesis brought about thirty percent increase in the posterior silkgland of the longer silk yielding varieties during the 2nd day to the 4th day stages of the 5th instar, when compared with those in the posterior silkgland of the shorter silk yielding varieties. 5. RNA/DNA ratio in the posterior silkgland on the 2nd day and 4th day stages of the 5th instar was more increased in the longer silk yielding varieties than the shorter silk yielding varieties. 6. It was shown that DNA content for the longer silk yielding varieties came to be 374$\mu\textrm{g}$ per larva in the posterior division of silkgland on the 4th day stage of 5th instar, whereas it was 199$\mu\textrm{g}$ per larva for the shorter silk yielding varieties. 7 There was 34.8％ Alanine, 22.8％ Glycine, 9.1％ Serine and 7.3％ Tyrosine in the posterior division of silkgland as major amino acids. It is noticed that there was a little differences between the amino acids composition of posterior silkgland and silk fibroin. 8. There was some differences in the amino acids composition of posterior silkgland between pure lines and their hybrids. Glycine, Serine and acidic amino acids, essential to silk formation, seemed to be increased in the F$_1$ hybrids, whereas other amino acids such as Valine, Iso-leucine, Leucine, Lysine. Phenylalanine, Histidine and Arginine were reduced. 9. The content of Glycine, Alanine and Serine in the posterior division of silkgland was elevated in the longer silk yielding varieties than the others. Consequently. these three amino acids in the posterior silkgland seemed to be related to the silk yielding ability in the longer silk yielding varieties.s.

• Journal of the Korean Society of Radiology
• /
• v.15 no.6
• /
• pp.781-788
• /
• 2021

Due to the high sensitivity to radiation, excessive exposure needs to be prevented by accurately measuring the dose irradiated to the skin during radiation therapy. Although clinical trials use dosimeters such as film, OSLD, TLD, glass dosimeter, etc. to measure skin dose, these dosimeters have difficulty in accurate dosimetry on skin curves. In this study, to solve these problems, we developed a skin dosimeter that can be attached according to human flexion and evaluated its response characteristics. For the manufacture of the dosimeter, lead oxide (PbO) with high atomic number (Z_Pb: 82, Z_O: 8) and density (9.53 g/cm³) and silicon binders that can bend according to human flexion were used. In the case of a dosimeter made of PbO material, the performance degradation has been prevented by using parylene and others due to the presence of degradation due to oxidation, but the previously used parylene is affected by bending, so a new form of passive layer was produced and applied to the skin dosimeter. The characteristic evaluation of the skin dosimeter was evaluated by analyzing SEM, reproducibility, and linearity. Through SEM analysis, bending was evaluated, reproducibility and linearity at 6 MeV energy were evaluated, and applicability was assessed with a skin dosimeter. As a result of observing the dosimeter surface through SEM analysis, the parylene passive layer PbO dosimeter with the positive layer raised to the parylene produced cracks on the surface when bent. On the other hand, no crack was observed in the silicon passive layer PbO dosimeter, which was raised to silicon passive layer. In the reproducibility measurement results, the RSD of the silicon passive layer PbO dosimeter was 1.47% which satisfied the evaluation criteria RSD 1.5% and the linearity evaluation results showed the R² value of 0.9990, which satisfied the evaluation criteria R² 9990. The silicon passive layer PbO dosimeter was evaluated to be applicable to skin dosimeters by demonstrating high signal stability, precision, and accuracy in reproducibility and linearity, without cracking due to bending.