• 제목/요약/키워드: oscillatory

검색결과 714건 처리시간 0.022초

하나로 원자로에 설치될 대향 이상 열사이펀 루프에 관한 실험 (A Closed Counter-Current Two-Phase Thermosyphon Loop of a Cold Neutron Source in HANARO Research Reactor)

  • 황권상;조만순;성형진
    • 대한기계학회논문집B
    • /
    • 제24권8호
    • /
    • pp.1038-1045
    • /
    • 2000
  • An experimental study was carried out to delineate the flow characteristics in a closed countescurrent two-phase thermo syphon with concentric tubes. This is to be installed in the HANARO research reactor as a part of a Cold Neutron Source(CNS). In the present investigation, experiments ata room temperature with Freon-II3 as a moderator were performed. Results show that, based on the magnitude of pressure fluctuation, the flow regimes could be divided into 4 distinct ones in the ($V_f,\;Q_i$) plane, where $V_f$ represents the volume of the charged liquid and $Q_i$ the heat load: a stable flow regime, an oscillatory flow regime, a restablized flow regime and a dryout flow regime. For $V_f$>2.5l, the flow is stable at low $Q_i$. However, as $Q_i$ increases, the flow becomes oscillatory and finally restablizes As $V_f$ increases, the oscillation amplitude decreases, reaching to the restablized flow region at low $Q_i$, and the liquid level in the moderator cell remains high. In the oscillatory flow regimes, for a fixed VI; the oscillating period of time varies with $Q_i$, having a minimum value at a certain value of $Q_i$. The heat load, where the oscillating period of time is minimum, decreases as $V_f$ increases.

암반대수층 내 순간충격시험 시 관찰된 요동반응의 해석 (Analysis of oscillatory responses of slug tests in a crystalline rock aquifer)

  • 류일호;지성훈;고용권
    • 터널과지하공간
    • /
    • 제19권4호
    • /
    • pp.348-354
    • /
    • 2009
  • 순간충격시험은 대수층의 수리특성을 빠르고 효과적으로 측정할 수 있는 가장 일반적인 방법이다. 한국원 자력연구원(KAERI) 부지 내 YS-4 시추공에서 부지의 수리특성을 알아보기 위하여 순간충격시험을 수행하였고, 그 결과 일반적인 수리반응과 다른 요동수리반응을 관찰하였다. 이 반응결과를 일반적인 해석방법과 시추공내 유체의 관성 영향을 고려한 해석방법으로 해석하여 각각 비교하였다. 그 결과 일반적인 해석 방법으로는 수리전도도가 $3.10{\times}10^{-6}{\sim}3.63{\times}10^{-5}$ m/sec로 예측되어 해석결과의 차이가 크게 나타났지만, 유체의 관성효과를 고려하였을 때는 $4.85{\times}10^{-6}{\sim}5.44{\times}10^{-6}$ m/sec로 그 해석결과가 거의 비슷하였다. 이는 순간충격시험 시 요동수리 반응은 반드시 공내 유체의 관성 효과를 고려하여 해석하여야 함을 보여준다.

높은 레이놀즈수를 가진 난류 진동 경계층에서의 k-ε과 k-ω 난류모형의 비교 (Comparative Study on k-ε and k-ω Closures under the Condition of Turbulent Oscillatory Boundary Layer Flow at High Reynolds Number)

  • 손민우;이관홍;이길성;이두한
    • 한국수자원학회논문집
    • /
    • 제44권3호
    • /
    • pp.189-198
    • /
    • 2011
  • 본 연구는 난류현상의 모형화를 위해 널리 이용되는 k-$\varepsilon$과 k-$\omega$ 난류모형을 비교하는 것이 목적으로, 횡방향 흐름이 무시될 수 있는 U-튜브 모양의 터널형 수로 내 높은 레이놀즈수를 가진 진동 경계층 흐름에 두 난류해석방법을 적용하였다. 난류모형의 적용은 1차원 연직 모형을 통해 이루어지며, 수치 모의 결과, 유속의 분포와 난류운동에너지 (turbulent kinetic energy) 모두에서 두 모형이 매우 유사한 결과를 나타낸다. 이를 통하여, 횡방향 압력경사가 무시될 수 있는 조건에서는 k-$\varepsilon$과 k-$\omega$ 난류모형이 큰 차이를 보이지 않고, 우수한 결과를 나타냄을 알 수 있다. 따라서 직선형 하천 및 하구부, 해안에서의 파랑 흐름 등과 같이 횡방향의 압력경사가 미미한 지역에서의 난류를 수치적으로 해석할 경우, 기존의 풍부한 연구를 통해 매개변수의 검보증이 장기간 이루어진 k-$\varepsilon$ 모형을 이용하는 것이 추천된다.

밀양 고알루미나 점토광상 다이아스포아 단괴내의 진동누대 전기석의 화학적 특징 (Chemical Characterization of Oscillatory Zoned Tourmaline from Diaspore Nodule, an Aluminum-rich Clay Deposit, Milyang, South Korea)

  • 추창오;김영규
    • 한국광물학회지
    • /
    • 제18권3호
    • /
    • pp.227-236
    • /
    • 2005
  • 밀양점토광상의 알루미늄이 풍부한 다이아스포아 단괴에서 열수변질 기원 전기석은 집합체나 미립으로 산출한다 대부분의 전기석 결정은 미세한 대구조가 특징적인데, 이는 열수변질 작용동안 개방계의 유체혼합과 같은 변동이 심한 환경에서 형성되었음을 지시한다. 본 전기석의 화학적 진동누대 구조의 양상은 결정축의 방향과는 무관하게 흡사한 특징을 보인다. Mg는 결정성장 초기, Fe는 후기 단계동안에 부화되었으며, Fe/Mg의 비는 규칙적으로 진동함을 보여 준다. 화학분석, 후방산란영상(BSE), X-선 화학분석도에 따르면 전기석내 진동누대구조는 Fe와 Mg 함량변화에 주로 제어되었으며 봉소함량의 기여도는 미미하다. 전기석이 다이아스포아와 딕카이트로 변질되는 것으로 볼 때 전기석은 B, Fe, Mg의 활동도가 감소하면서 이들 고알루미나 광물에 비하여 불안정해 진다. 그러므로 열수계내 알루미늄 활동도가 전기석의 안정성을 제어하는 것으로 볼 수 있다.

RK-Butcher알고리듬의 사용에 의한 주기적 진동 문제의 수치적 시뮬레이션 (Numerical Simulation of Periodic and Oscillatory Problems by Using RK-Butcher Algorithms)

  • Park, Dae-Chul;Gopal, Devarajan;Murugesh, V.
    • 융합신호처리학회논문지
    • /
    • 제9권1호
    • /
    • pp.82-88
    • /
    • 2008
  • 본 논문은 주기적 진동 문제를 연구하기 위해 Runge-Kutta(RK)-Butcher 알고리듬이 소개되었다. RK-Butcher 알고리듬을 사용하여 얻어진 시뮬레이션 결과와 고전적인 4차 RK(4) 방법을 통해 얻은 결과들을 제안한 알고리듬의 성능을 확인하기 위하여 몇몇 주기적 진동 문제들의 정확한 해와 비교하였다. RK-Butcher 알고리듬의 시뮬레이션 결과는 항상 문제의 정확한 해 RK(4) 방법보다 더 근접한 결과를 줌이 확인되었다. 정확도 측면에서 RK-Butcher 알고리듬이 RK(4) 방법과 비교해볼 때 우수함을 알 수 있다. 제안한 RK-Butcher 알고리듬은 프로그램 언어로 쉽게 구현할 수 있으며 임의 시간에 종료해도 훌륭한 근사적인 해를 얻을 수 있다. RK-Butcher 알고리듬은 짧은 시간내에 이상적인 정확한 해에 근접한 결과를 주기 때문에 궤도 와 두 물체의 문제를 연구하는데 훌륭한 수치 알고리듬으로 적용 가능하다.

  • PDF

원관 내 왕복유동에 따른 열전달특성의 실험적 연구 (Experimental investigation on the heat transfer characteristics of an oscillatory pipe flow)

  • 박상진;이대영;노승탁
    • 대한기계학회논문집B
    • /
    • 제20권6호
    • /
    • pp.1959-1970
    • /
    • 1996
  • 스터링 또는 VM 사이클 기긱의 열교환기의 구성요소 중 냉각부와 가열부만으로 이루어진 실험장치를 구성하고 벽온도분포와 열전달량을 측정하여 왕복유동주파수와 왕복유동거리비가 열전달에 미치는 영향을 실험하였다. 냉각부와 가열부와 온도차를 일정하게 유지하기 위해서는 왕복유동의 주파수와 왕복유동거리비가 증가함에 따라 열유속이 증가되어야 함을 보였다. 이는 왕복유동의 주파수와 왕복유동거리비가 중감함에 따라 가열부와 냉각부 사이의 열전달, 즉 열교환기 길이 방향으로의 열전달이 증가함을 의미한다. 또한 실험과 1차원 속도가정에 의한 해석이 매우 잘 일치함을 확인하였다. 가열부에서 반경방향응로의 유체온도분포를 측정하고 열전달계수를 구하였다. 반경방향 온도분포는 왕복유동주파수가 빨라질수록 포물선형태에서 벗어나 편평한 분포를 보이고 무차원 주파수가 커지고 열교환기 길이가 유체의 왕복거리에 비하여 짧아질수록 반경방향으로의 열전달이 향상되었다. 따라서 가열부에서의 평균 열전달 계수 역시 왕복유동주기와 열교환기가 짧을 때 더 크게 나타났다. 결론적으로 같은 전열면적을 가진다면 짧은 열교환기가 상대적으로 유리하나 왕복주파수가 빨라지는 것은 한주기당 열전달량의 측면에서 오히려 효율을 저하시키는 효과를 가져온다.

곡관덕트에서 난류진동유동의 전단응력분포와 압력분포 (Wall shear stress and Pressure Distributions of Developing Turbulent Oscillatory Flows in a Square sectional Curved Duct)

  • 이홍구;손현철;이행남;박길문
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 춘계학술대회논문집E
    • /
    • pp.380-385
    • /
    • 2001
  • In the present study, flow characteristics of turbulent oscillatory flow in a square-sectional $180^{\circ}$ curved duct are investigated experimentally. In order to measure wall shear stress and pressure distributions, experimental studies for air flow are conducted in a square-sectional $180^{\circ}$ curved duct by using the LDV system with the data acquisition and the processing system. The wall shear stress measuring point bend angle of the $150^{\circ}$ and pressure distribution of the inlet (${\phi}=0^{\circ}$) to the outlet (${\phi}=180^{\circ}$) at $10^{\circ}$ intervals of the duct. The results obtained from the experimentation are summarized as follows: A wall shear stress value in an inner wall is larger than that in an outer wall, except for the phase angle (${\omega}t/{\pi}/6$) of 3, because of the intensity of secondary flow. The pressure distributions are the largest in accelerating and decelerating regions at the bend angle(${\phi}$) of $90^{\circ}$ and pressure difference of inner and outer walls is the largest before and after the ${\phi}=90^{\circ}$.

  • PDF

수평격판을 갖는 정사각형 밀폐공간내에서 자연대류 유동 및 열전달 (Natural Convective Flow and Heat Transfer in a Square Enclosure with a Horizontal Partition)

  • 정인기;김점수;송동주
    • 대한기계학회논문집
    • /
    • 제17권9호
    • /
    • pp.2304-2314
    • /
    • 1993
  • Natural convective flow and heat transfer in a two-dimensional square enclosure fitted with a horizontal partition are investigated numerically. The enclosure was composed of the lower hot and the upper cold horizontal walls and the adiabatic vertical walls, and a partition was situated perpendicularly at the one vertical insulated wall. The governing equations are solved by using the finite element method with Galerkin method. The computations were carried out with the variations of length, position and thermal conductivity of the partition, and Rayleigh number based on the temperature difference between two horizontal walls and the enclosure height with water(Pr=4.95). As the results, an oscillatory motion of natural convection is resulted in a sudden rise of overall heat transfer, but the increase of length of partition is significantly restrained the increase of Nusselt number. The maximum heat transfer was shown just before the transition of the direction of oscillating flow. An oscillatory motion of flow was perfectly shown the stability with the decrease of the length of partition and Rayleigh number. Also, the heat transfer was raised with the increase of the thermal conductivity in proportion to the increase of the length of partition. The stability and oscillation of flow are affected by the position of partition.

보배 견문모 광상에서 산출하는 녹염석의 누대구조의 특징과 발달과정 (Mineralogical Characteristics and Formation Processes of Zonal Textures in Hydrothermal Epidote from the Bobae Sericite Deposit)

  • 추창오
    • 자원환경지질
    • /
    • 제34권5호
    • /
    • pp.437-446
    • /
    • 2001
  • 부산 보배견운모 광상의 프로필리틱 열수변질대에서 형성된 녹염석은 다양한 누대구조를 수반하는데, 다중결정성장 누대구조, 진동누대구조, patchy누대구조 및 강도가 약한 불규칙한 누대구조가 특징적이다. 누대구조는 주로 열수용 액의 AI Fe의 활동도에 좌우되며, 전반적으로 결정의 중심부에서는 AI, 가장자리에서는 Fe의 함량이 높다. 녹염석 의 Ps는 18.5-34.3 mot.% 범위이다. 여러 결정이 중첩하여 형성된 누대구조에서는 잔류조직이 부분적으로 흡수용해 되었으며, 이후에 결정들이 새로 성장하였다. 다중결정성장 누대구조나 진동누대구조는 열수시스템의 유체의 화학조성, 산화환원전위, 온도 등과 같은 물리화학적 변수들이 급격하게 변동하였음 지시한다

  • PDF

ACRT에 의한 초크랄스키 대류진동 제어 (Control of oscillatory Czochralski convection by ACRT)

  • 최정일;성형진
    • 대한기계학회논문집B
    • /
    • 제20권7호
    • /
    • pp.2397-2408
    • /
    • 1996
  • A numerical study was made of the control of transient oscillatory flow modes in Czochralski convection. The reduction of temperature oscillation was achieved by changing the rotation rate of crystal rod, .OMEGA.$_{S}$=.OMEG $A_{S0}$(1+ $A_{S}$sin(2.pi. $f_{S}$/ $t_{p}$t)). The temporal behavior of oscillation flow was scrutinized over broad ranges of two parameters, i.e., the rotation amplitude( $A_{S}$.leq.0.5) and the nondimensional frequency (0.9.leq. $f_{S}$.leq.1.5). The mixed convection parameter was ranged 0.225.leq.Ra/PrR $e^{2}$.leq.0.929, which encompassed the buoyancy-and forced-dominant convection regimes. Computational results revealed that the temperature oscillations could be reduced effectively by a proper adjustment of the control parameters. The uniformity of temperature distribution near the crystal rod was examined. The control of oscillatory flow modes was also made for a realistic, low value of Pr.