• The Journal of Korean Physical Therapy
• /
• v.29 no.2
• /
• pp.50-54
• /
• 2017

Purpose: This investigation aimed to determine the effects of treadmill training (TT) and high frequency chest wall oscillation (HFCWO) on pulmonary function and walking ability in stroke patients as well as propose an exercise program to improve cardiovascular function. Methods: Twenty hemiplegic stroke patients were randomized to either the control group (CG) (n=10) or the experimental group (EG), which received TT and HFCWO (n=10). Pulmonary function was quantitated using patient forced vital capacity (FVC) and forced expiratory volume at one second (FEV1) while walking speed was assessed by the 10m walking test (10MWT). Further, walking endurance was determined utilizing the 6-minute walk test (6MWT). Subjects of the EG performed the study protocol for 60 minutes, five times a week for six weeks; CG patients did not participate in regular exercise. To determine significance for the differences observed before and after exercise, within-group and between-group comparisons were conducted utilizing paired and independent t-tests, respectively, with the level of significance set at ${\alpha}=0.05$. Results: Within-groups, significant differences were observed in both FVC and FEV1 (p<0.01) following completion of the study protocol. Further, between-group comparisons demonstrated significant differences in both FVC (p<0.05) and FEV1 (p<0.01). Post-exercise, significant changes in the 10MWT and 6MWT score were observed between the EG and CG (p<0.01). Further, statistically significant differences were observed in 6MWT scores between-groups (p<0.05). Conclusion: The TT and HFCWO effectively improved pulmonary function and walking ability in subjects with stroke. The proposed program can be applied to stroke patients as a useful therapy.

• Journal of KIISE
• /
• v.43 no.8
• /
• pp.919-926
• /
• 2016

In a wireless network, TCP causes the performance degradation because of mistaking packet loss, which is caused by characteristics of wireless link and throughput oscillation due to change of devices connected on a limited bandwidth. Delay based TCP is not affected by packet loss because it controls window size by using the RTT. Therefore, it can solve the problem of unnecessary degradation of the rate caused by misunderstanding reason of packet loss. In this paper, we propose an algorithm for improving the remaining problems by using delay based TCP. The proposed scheme can change throughput adaptively by adding the RTT, which rapidly reflects the network conditions to BaseRTT. It changes the weight of RTT and the increases and decreases window size based on the remaining amount of the buffer. The simulation indicated that proposed scheme can alleviate the throughput oscillation problem, as compared to the legacy TCP Vegas.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.2
• /
• pp.19-28
• /
• 2010

Generally, combustion instability is generated by the mutual coupling between the heat release and the acoustic pressure in the combustor. On the occasion, the acoustic pressure generates the oscillation of the mass flow rate of propellant injected from injector, and this oscillation again affects combustion in the combustor. So, the dynamic characteristics of the injector have been studied to control combustion instability using injector itself in Russia from 1970's. In order to study injector dynamics, a mechanical pulsator for forced pressure pulsation is produced and the method to quantify the mass flow rate of the propellant that is oscillating at the exit of the injector is developed. With the pulsator and the method, pulsating values of the mass flow rate, pressure, liquid film thickness, and axial velocity generated at the exit of the simplex swirl injector are measured in real time. And phase-amplitude characteristics of each parameter are analyzed using these pulsating values acquired at the exit of the simplex swirl injector.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.12
• /
• pp.1021-1027
• /
• 2018

Experimental studies have been conducted to verify that the positive coupling between pressure oscillation (p') and combustion oscillation (q') of high frequency range is a prerequisite for the initiation of low frequency instability in hybrid rocket combustion. The post-chamber length and combustion equivalence ratio were selected as critical parameters to control the phase difference between p' and q', and p' amplitude in relation to the suppression of LFI. In the results, even if the post-chamber length increases, the phase difference between p' and q' maintains below pi/2, which is a necessary condition for the LFI development, but the amplification of RI (Rayleigh index) was substantially decreased leading to a stable combustion. In addition, results confirmed that combustion stability is achieved by changing the momentary equivalence ratio and/or by suppressing the positive coupling status of p' and q'. Thus, the periodic amplification of RI was identified as the middle path of the mechanism of occurrence of LFI.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.3
• /
• pp.171-178
• /
• 2008

Pressure control of hydraulic pump using SRM with pressure predictor and direct torque control method is presented in this paper. Nowadays, high efficiency and high performance motor drive is much interested in hydraulic pump system. But the hydraulic pump system has an inherent defect that its dynamic behavior causes by interaction between the sensor and hydraulic load. It will make low performance of whole system, even unstable and oscillatory. Proposed system integrates pressure predictor and direct instantaneous torque control (DITC). The pressure predictor includes Smith predictor, which is easy to improve unstable or long oscillation in traditional negative feedback control and popular PID control architectures. And DITC method can reduce inherent torque ripple of SRM, and develop smooth torque to load, which can increase stability and improve the torque response of SR drive. So high dynamic performance and stabilization can achieved proposed hydraulic system. At last, the proposed hydraulic system is verified by simulation and experimental results.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.4
• /
• pp.65-73
• /
• 2003

This paper presents the implementation of an analog signal-processing ASIS to detect an angular velocity signal from a vibrator angular velocity detection sensor. The output of the sensor to be charge appeared as the variation of the capacitance value in the structure of the sensor was detected using charge amplifiers and a self oscillation circuit for driving the sensor was implemented with a sinusoidal self oscillation circuit using the resonance characteristics of the sensor. Specially an automatic gain control circuit was utilized to prevent the deterioration of self-oscillation characteristics due to the external elements such as the characteristic variation of the sensor process and the temperature variation. The angular velocity signal, amplitude-mod)Hated in the operation characteristics of the sensor, was demodulated using a synchronous detection circuit. A switching multiplication circuit was used in the synchronous detection circuit to prevent the magnitude variation of detected signal caused by the amplitude variation of the carrier signal. The ASIC was designed and implemented using 0.5${\mu}{\textrm}{m}$ CMOS process. The chip size was 1.2mm x 1mm. In the experiment under the supply voltage of 3V, the ASIC consumed the supply current of 3.6mA and noise spectrum density from dc to 50Hz was in the range of -95 dBrms/√Hz and -100 dBrms/√Hz when the ASIC, coupled with the sensor, was in normal operation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.5 s.96
• /
• pp.482-487
• /
• 2005

In this paper, we propose the control method of output impedance of each cascode unit cell of distributed amplifier by connecting varactors in the gate-terminal of common gate. Compared to common source unit cell, cascode unit cell has many advantages such as high gain and high output impedance as well as negative resistance loading. But if the transistor model which is used in design is inaccurate and process parameter is changed, oscillation sometimes can occur at band edge in which the gain start to drop. Therefore, we need control circuit which can prevent oscillation, although the circuit has already fabricated, and varactor connected to gate-terminal of common gate of cascode gain cell can play that part. Measured result of fabricated distributed amplifier shows the capability of contol of gain characteristic by adjusting of value of varactors, this can guarantee the stability of the circuit. The gain is $8.92\pm0.82dB$ over 49 GHz, the group delay is $\pm9.3 psec$ over 41 GHz. All transistor which has $0.15{\mu}m$ gate length is GaAs based p-HEMT, and distributed amplifier is put together with 4 stages.

• The Korean Journal of Applied Statistics
• /
• v.22 no.6
• /
• pp.1191-1201
• /
• 2009

The cumulative sum(CUSUM) control charts are typically used for detecting small level shifts in process control. To control an auto-correlated process, the model-based control methods can be employed, in which the residuals from fitting a time series model are applied to the CUSUM chart. However, the persistent level shifts in the original process may lead to varying mean shifts in residuals, which may deteriorate detection performance significantly. Therefore, in this paper, focussing on ARMA(1,1), we propose a new CUSUM type control method which can detect the dynamic mean shifts in residuals especially with oscillating pattern effectively and, through the simulation study, evaluate its performance by comparing with other various CUSUM type control methods introduced so far.

• Nuclear Engineering and Technology
• /
• v.21 no.2
• /
• pp.99-110
• /
• 1989

The optimal control of xenon concentration in a nuclear reactor is posed as a linear quadratic regulator problem with state feedback control. Since it is not possible to measure the state variables such as xenon and iodine concentrations directly, implementation of the optimal state feedback control law requires estimation of the unmeasurable state variables. The estimation method used is based on the Luenberger observer. The set of the reactor kinetics equations is a stiff system. This singularly perturbed system arises from the interaction of slow dynamic modes (iodine and xenon concentrations) and fast dynamic modes (neutron flux, fuel and coolant temperatures). The singular perturbation technique is used to overcome this stiffness problem. The observer-based controller of the original system is effected by separate design of the observer and controller of the reduced subsystem and the fast subsystem. In particular, since in the reactor kinetics control problem analyzed in the study the fast mode dies out quickly, we need only design the observer for the reduced slow subsystem. The results of the test problems demonstrated that the state feedback control of the xenon oscillation can be accomplished efficiently and without sacrificing accuracy by using the observer combined with the singular perturbation method.

• Journal of Power Electronics
• /
• v.15 no.5
• /
• pp.1402-1408
• /
• 2015

A MOSFET's gate driver based on magnetic coupling is investigated. The gate driver can meet the demands in applications for wide range of duty cycles and high frequency. Fully galvanic isolation can be realized, and no auxiliary supply is needed. The driver is insensitive to the leakage inductor of the isolated transformer. No gate resistor is needed to damp the oscillation, and thus the peak output current of the gate driver can be improved. Design of the driving transformer can also be made more flexible, which helps to improve the isolation voltage between the power stage and the control electronics, and aids to enhance the electromagnetic compatibility. The driver's operation principle is analyzed, and the design method for its key parameters is presented. The performance analysis is validated via experiment. The disadvantages of the traditional magnetic coupling and optical coupling have been conquered through the investigated circuit.