• 한국수자원학회논문집
• /
• 제38권12호
• /
• pp.985-994
• /
• 2005

수문시계열을 분석하기 위한 방법으로 낮은 차원에서 해석이 가능한 주성분분석 방법의 문제점을 검토하고 이를 보완할 수 있는 독립성분분석의 이론과 특성을 검토하였고 수문기상자료인 Nino지역의 해수면온도에 적용하여 El $\tilde{n}ino$-Southern Oscillation(ENSO) 사상과의 상관성을 평가하였다. 혼합자료를 사용하여 독립성분분석 방법의 주성분 분리 능력을 검토한 결과 독립성분분석이 기존 주성분분석에 비해 통계적으로 우수한 결과를 나타내었다. El $\tilde{n}ino$의 감시구역인 Nino+3.4지역의 $5^{\circ}{\times}5^{\circ}$(위도와 경도)의 총 20개 Global Anomaly SST 격자자료를 대상으로 분석을 실시하여 El $\tilde{n}ino$-Southern Oscillation(ENSO)사상의 발생시기와의 상관관계를 평가하였으며 한 개의 독립성분($86\%$)만으로 SST의 전체적인 거동을 표현할 수 있었으며 주요 ENSO 발생시기와 일치하는 결과를 나타내었다. 또한 국내 주요지점의 여름 강수량을 대상으로 독립성분분석을 적용한 결과 지역적인 특성을 고려하여 비교적 합리적으로 독립성분을 추출할 수 있었으며 IC-1과 IC-2에서 1970년대 이후로 여름강수량의 증가를 확인할 수 있었다.

• 대한기계학회논문집B
• /
• 제34권2호
• /
• pp.197-202
• /
• 2010

자발 진동하는 층류 예혼합 분젠 화염을 관찰하기 위하여 분기관을 가진 연소기를 제작 하였다. 특히, 조건에 따른 화염 거동을 살펴봤으며, 화염 표면적과 열발생 변동의 관계에 대하여 고찰하였다. 본 연구에서 사용된 당량비는 1.1 이고, 노즐 출구 평균 유속은 1.75 m/sec 이다. 연소 챔버와 분기관의 길이비(L.R.)는 연소기 내 압력 변동에 영향을 미치며, 결과적으로 화염 거동 특성이 달라짐을 관찰하였다. 또한, 간섭 필터의 유무에 따른 $OH^*$, $CH^*$, 그리고 화염 자발광은 정성적으로 유사한 거동을 나타냈으며, 자발 진동하는 층류 예혼합 분젠 화염의 화염 표면적 변동과 열발생 변동은 선형적인 관계를 가짐을 확인하였다.

• Structural Engineering and Mechanics
• /
• 제64권6권
• /
• pp.703-721
• /
• 2017

The experimental study of the behavior of dry medium and loose sandy soil under the action of a single impulsive load is carried out. Different falling masses from different heights were conducted using the falling weight deflectometer (FWD) to provide the single pulse energy. The responses of soils were evaluated at different locations (vertically below the impact plate and horizontally away from it). These responses include; displacements, velocities, and accelerations that are developed due to the impact acting at top and different depth ratios within the soil using the falling weight deflectometer (FWD) and accelerometers (ARH-500A Waterproof, and Low capacity Acceleration Transducer) that are embedded in the soil and then recorded using the multi-recorder TMR-200. The behavior of medium and loose sandy soil was evaluated with different parameters, these are; footing embedment, depth ratios (D/B), diameter of the impact plate (B), and the applied energy. It was found that increasing footing embedment depth results in: amplitude of the force-time history increases by about 10-30%. due to increase in the degree of confinement with the increasing in the embedment, the displacement response of the soil will decrease by about 25-35% for loose sand, 35-40% for medium sand due to increase in the overburden pressure when the embedment depth increased. For surface foundation, the foundation is free to oscillate in vertical, horizontal and rocking modes. But, when embedding a footing, the surrounding soil restricts oscillation due to confinement which leads to increasing the natural frequency, moreover, soil density increases with depth because of compaction, that is, tendency to behave as a solid medium.

• Nuclear Engineering and Technology
• /
• 제53권12호
• /
• pp.3990-4002
• /
• 2021

CSPACE (Core meltdown, Safety and Performance Analysis CodE for nuclear power plants) for a simulation of severe accident progression in a Pressurized Water Reactor (PWR) is developed by coupling of verified system thermal hydraulic code of SPACE (Safety and Performance Analysis CodE for nuclear power plants) and core damage progression code of COMPASS (Core Meltdown Progression Accident Simulation Software). SPACE is responsible for the description of fluid state in nuclear system nodes, while COMPASS is responsible for the prediction of thermal and mechanical responses of core fuels and reactor vessel heat structures. New heat transfer models to each phase of the fluid, flow blockage, corium behavior in the lower head are added to COMPASS. Then, an interface module for the data transfer between two codes was developed to enable coupling. An implicit coupling scheme of wall heat transfer was applied to prevent fluid temperature oscillation. To validate the performance of newly developed code CSPACE, we analyzed typical severe accident scenarios for OPR1000 (Optimized Power Reactor 1000), which were initiated from large break loss of coolant accident, small break loss of coolant accident, and station black out accident. The results including thermal hydraulic behavior of RCS, core damage progression, hydrogen generation, corium behavior in the lower head, reactor vessel failure were reasonable and consistent. We demonstrate that CSPACE provides a good platform for the prediction of severe accident progression by detailed review of analysis results and a qualitative comparison with the results of previous MELCOR analysis.

• 한국전산유체공학회지
• /
• 제13권4호
• /
• pp.126-134
• /
• 2008

We developed a three dimensional Navier-Stokes code based on the level set method to simulate two phase flows with high density ratio. The Navier-Stokes equations with consideration of the surface tension effects are solved by using SIMPLE algorithm on a non-staggered grid. The present code is validated by simulating two test problems. First one is to simulate a rising bubble inside a cube. The thickness of the interface of the bubble is shown to affect the pressure distribution around the interface. As the thickness decreases, the pressure field around the interface becomes more oscillatory. As the bubble rises, a ring vortex is shown to form around the interface and the bubble eventually develops into an ellipsoidal shape. Merge of two bubbles inside a container is secondly tested to show the robustness of the present code for two phase flow simulation. Numerical results show stable and reliable behavior during the process of merging of two bubbles. The velocity and pressure fields around the interface of bubbles are shown oscillation free during the merging of two bubbles.

• ETRI Journal
• /
• 제34권6호
• /
• pp.950-953
• /
• 2012

Schottky barrier single electron transistors (SB-SETs) and Schottky barrier single hole transistors (SB-SHTs) are fabricated on a 20-nm thin silicon-on-insulator substrate incorporating e-beam lithography and a conventional CMOS process technique. Erbium- and platinum-silicide are used as the source and drain material for the SB-SET and SB-SHT, respectively. The manufactured SB-SET and SB-SHT show typical transistor behavior at room temperature with a high drive current of $550{\mu}A/{\mu}m$ and $-376{\mu}A/{\mu}m$, respectively. At 7 K, these devices show SET and SHT characteristics. For the SB-SHT case, the oscillation period is 0.22 V, and the estimated quantum dot size is 16.8 nm. The transconductance is $0.05{\mu}S$ and $1.2{\mu}S$ for the SB-SET and SB-SHT, respectively. In the SB-SET and SB-SHT, a high transconductance can be easily achieved as the silicided electrode eliminates a parasitic resistance. Moreover, the SB-SET and SB-SHT can be operated as a conventional field-effect transistor (FET) and SET/SHT depending on the bias conditions, which is very promising for SET/FET hybrid applications. This work is the first report on the successful operations of SET/SHT in Schottky barrier devices.

• Bulletin of the Korean Chemical Society
• /
• 제27권10호
• /
• pp.1525-1530
• /
• 2006

A simple oscillating reaction model subject to additive Gaussian white noise is investigated as the model is located in the dynamic region of oscillations. The model is composed of three ordinary differential equations representing the time evolutions of X, Y, and Z, respectively. Initially, a uniform random noise is separately added to the three equations to study the effect of noise on the oscillatory cycle of X, Y, and Z. For a given value of noise intensity, the amplitude of oscillation increases monotonically with time. Furthermore, the noise is added to any one of the three equations to study the impact of noise on one species on the bifurcation behavior of the other.

• 대한기계학회논문집B
• /
• 제29권10호
• /
• pp.1101-1110
• /
• 2005

In this paper we present the numerical results of the behavior of the horizontal vortex generated by ejecting a liquid vertically upward from an orifice into the bulk fluid above the orifice. The numerical calculation has been performed for the axi-symmetric Navier-Stokes equation. A simple flow-visualization experiment was also conducted to qualitatively verify the numerical solutions. Three cases of the flow configurations studied in this paper are; firstly, the vortex was generated without any background rotation, secondly, the vortex was made under a full background rotation, and thirdly, the vortex was made during the spin-up process such that only the region adjacent to the side wall was set into motion viewed in the inertial frame of reference. It was shown that the swirl flow at the inlet boundary affects considerably the formation and development of the vortex for the second case. In the third case, it was remarkable to see that the vortex cannot penetrate into the region near to the side wall of the tank, because of the strong swirl flow and corresponding high pressure gradient in the region.

• 수산해양기술연구
• /
• 제50권4호
• /
• pp.435-446
• /
• 2014

Tidal turbulence was examined using three-dimensional tidal velocity data observed at a trench offshore of Tongyoung, Korea. The kinetic energy and intensity, including the variation period of the flow velocity and direction, were used to investigate the relationships between tidal turbulence and fishing gear dynamics, including the effects of swimming fish during fishing operations. As the resultant velocity increased from 0.2 to 0.9 m/s, the kinetic energy also significantly increased, while the turbulence intensity decreased from 50 to 10%. Tidal flow in strong flow fields displayed shorter periods of between 4 and 10 s, as determined by fast Fourier transform, the global wavelet method, and peak event analysis, and the periods were compared with the period of response to swimming fish and to oscillation of fishing gear. As mean velocity increased, velocity amplitude also increased from 0.1 to 0.6 m/s, and its directional amplitude changed markedly from 20 and $90^{\circ}$. Our study suggests that tidal turbulence can influence fish behavior or fishing gear geometry during fishing operations, although our analysis considered only a limited area. In future work, observations should be carried out over a more extensive depth and area.

• 한국전자파학회논문지
• /
• 제13권9호
• /
• pp.937-946
• /
• 2002

본 논문에서는 도체로부터의 안정된 전자기 산란 응답을 계산하는 새로운 해법을 제안한다. 이 방법은 기존의 MOT (marching-on in time) 기법을 이용하지 않고, 가중 라게르 (Laguerre) 다항식으로 유기전류의 과도 응답을 표현하여 시간 영역의 적분방정식을 푼다. 이 시간 영역의 기저함수를 사용함으로써 적분식의 미분항을 해석적으로 처리하여 과도 응답을 구할 수 있다. 또한 적용되는 이 기저함수는 시간이 진행함에 따라 영으로 수렴하는 특성 때문에, 유기전류의 과도응답도 후기 진동을 가지지 않고 영으로 수렴한다. 제안되는 방법의 타당성을 보이기 위하여 시간 영역 전장 적분방정식의 해를 MOT 및 해석해와 주파수 영역으로부터 구한 해의 이산 푸리에 역변환 (inverse discrete Fourier transform, IDFT)과도 비교한다.