• Progress in Medical Physics
• /
• v.24 no.3
• /
• pp.191-197
• /
• 2013

Upon radiation treatment, it is the important factor to monitor the patient's motion during radiation irradiated, since it can determine whether the treatment is successful. Thus, we have developed the system in which the patient's motion is monitored in real time and moving treatment position can be automatically corrected during radiation irradiation. We have developed the patient's position monitoring system in which the patient's position is three dimensionally identified by using two CCD cameras which are orthogonal located around the isocenter. This system uses the image pattern matching technique using a normalized cross-correlation method. We have developed the system in which trigger signal for beam on and off is generated by quantitatively analyzing the changes in a treatment position through delivery of the images taken from CCD cameras to the computer and the motor of moving couch can be controlled. This system was able to automatically correct a patient's position with the resolution of 0.5 mm or less.

• Journal of Advanced Navigation Technology
• /
• v.14 no.5
• /
• pp.684-690
• /
• 2010

Recently, the NG(Next Generation) system is studied for supporting convergence of various services and multi mode of single terminal. And a demand of user for taking the various services is getting increased, for supporting these services, many systems being able to transmit a large message have been appeared. In the NG system, it has to be supporting the CDMA and WCDMA besides the tele communication systems using OFDM method with single terminal An intergrated system can be improved with adopting of SoC technique. For adopting SoC technique on the intergrated terminal, we have to solve the non linear problem of HPA(High Power Amplifier). Nonlinear characteristic of HPA distorts both amplitude and phase of transmit signal, this distortion cause deep adjacent channel interference. We adopt a polynomial pre-distortion technique for this problem. In this paper, a noble modem design for NG mobile communication service and a method using polynomial pre-distorter with PAPR technique for counterbalancing nonlinear characteristic of the HPA are proposed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.11
• /
• pp.1633-1642
• /
• 2017

Objective: Evaluation of exercise effects in racehorses is important in horseracing industry and animal health care. In this study, we compared metabolic patterns between before and after exercise to screen metabolic biomarkers for exercise effects in thoroughbreds. Methods: The concentration of metabolites in muscle, plasma, and urine was measured by $^1H$ nuclear magnetic resonance (NMR) spectroscopy analysis and the relative metabolite levels in the three samples were compared between before and after exercise. Subsequently, multivariate data analysis based on the metabolic profiles was performed using orthogonal partial least square discriminant analysis (OPLS-DA) and variable important plots and t-test was used for basic statistical analysis. Results: From $^1H$ NMR spectroscopy analysis, 35, 25, and 34 metabolites were detected in the muscle, plasma, and urine. Aspartate, betaine, choline, cysteine, ethanol, and threonine were increased over 2-fold in the muscle; propionate and trimethylamine were increased over 2-fold in the plasma; and alanine, glycerol, inosine, lactate, and pyruvate were increased over 2-fold whereas acetoacetate, arginine, citrulline, creatine, glutamine, glutarate, hippurate, lysine, methionine, phenylacetylglycine, taurine, trigonelline, trimethylamine, and trimethylamine N-oxide were decreased below 0.5-fold in the urine. The OPLS-DA showed clear separation of the metabolic patterns before and after exercise in the muscle, plasma, and urine. Statistical analysis showed that after exercise, acetoacetate, arginine, glutamine, hippurate, phenylacetylglycine trimethylamine, trimethylamine N-oxide, and trigonelline were significantly decreased and alanine, glycerol, inosine, lactate, and pyruvate were significantly increased in the urine (p<0.05). Conclusion: In conclusion, we analyzed integrated metabolic patterns in the muscle, plasma, and urine before and after exercise in racehorses. We found changed patterns of metabolites in the muscle, plasma, and urine of racehorses before and after exercise.

• Journal of Korean Academy of Nursing
• /
• v.17 no.2
• /
• pp.122-136
• /
• 1987

A group of studies revealed that family members of the seriously ill patient had some needs during the period of patient's hospitalization. Needs of the seriously-ill patient family could be classified into three aspect, i. e. needs on the prognosis of patient, needs on the well-being of family members themselves and needs on hospital environment. Several instrument were developed to measure the needs of the seriously ill patient, but their content tended to overemphasize the aspect of the prognosis of patient. The purpose of this study was to develop a new instrument to measure the needs in the aspect of the seriously ill patient's family themselves in details to increase the cummulative Percentage of the scale. Subjects were 134 family members of the seriously-ill patients, who were bung cared in ICU of seven university hospitals and data were collected from march 16, 1987 to April 11, 1987. The instrument used in this study was made by the author on the basis of results of literature review. Content valitity of the instrument was tested by a professor majoring in nursing and reliability by calculation of Cronbach's α with data of the respondents. Data was analyzed as follows, using SAS, computer system. Factor structures of the seriously ill patients' family needs were elicited by factor analysis. The programme was the Principal Component Factor Analysis Method of factoring employing Varimax Orthogonal Rotation. The influences of the demographic variables on the degree of the seriously-ill patients' family need were analyzed by t-test and P-test. Results were as follows. 1. Needs of the seriously-ill patients' family elicited and their cummulative percentage were: Needs to be supported emotionally, 29.2% Needs to be informed on facilities available, 9.6% Needs to be informed on the patient's prognosis, 7.7%. Needs to be supported spiritually, 5.1%. Needs to be informed on hospital environment, 4.2%. Needs to be helped to spare time, 3.9%. Needs to be informed on their role, 3.5%. Needs to be present near patient, 3.3%. 2. Educational background was found to influence on some factors. College-graduate group had higher Bevel of needs to be . informed on facilities available to be informed on the patient's prognosis, needs to be supported spiritually, needs to be helped to spare time, needs to be informed on their role than high school graduate group. 3. Among the parents, sons and daughters and the relative groups, the parents of the seriously ill patient had highest level of needs to be present near patient. Suggestions for further studies were as follows. 1. As the instruments used in the previous studies had high cummulative percentages in the aspect of the prognosis of patient and that in this study in the aspect of the prognosis of patient and that in this study in the aspect of the seriously ill patient's family themselves, development of a new instrument which combined the items of both of them is needed. 2. A study to clarify the influence of type and number of admission on need to be supported emotionally is needed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5A
• /
• pp.717-725
• /
• 2000

Within the last several years, there has been a large number of algorithms developed for face recognition. The majority of these algorithms have been view- and projection-based algorithms. Our definition of projection is not restricted to projecting the image onto an orthogonal basis the definition is expansive and includes a general class of linear transformation of the image pixel values. The class includes correlation, principal component analysis, clustering, gray scale projection, and matching pursuit filters. In this paper, we perform a detailed analysis of this class of algorithms by evaluating them on the FERET database of facial images. In our experiments, a projection-based algorithms consists of three steps. The first step is done off-line and determines the new basis for the images. The bases is either set by the algorithm designer or is learned from a training set. The last two steps are on-line and perform the recognition. The second step projects an image onto the new basis and the third step recognizes a face in an with a nearest neighbor classifier. The classification is performed in the projection space. Most evaluation methods report algorithm performance on a single gallery. This does not fully capture algorithm performance. In our study, we construct set of independent galleries. This allows us to see how individual algorithm performance varies over different galleries. In addition, we report on the relative performance of the algorithms over the different galleries.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.722-727
• /
• 2016

In this study, we attempted to reduce the generation of waste acids in the electropolishing process by improving the current efficiency. The optimum conditions of the electropolishing process when using the round bus bar were determined by the Taguchi method. The current density, polishing time, electrolyte temperature and flow rate were selected as the control factors for the current efficiency in the electropolishing process. An orthogonal array was created by considering three levels for each factor and experiments were carried out. The larger-the-better SN ratios were calculated by the Taguchi method. The current density was the most important factor affecting the current efficiency and the polishing time was the least important one. The optimum conditions to minimize the generation of waste acids were a current density of $45A/dm^2$, polishing time of 4 min, electrolyte temperature of $65^{\circ}C$ and flow rate of 7 L/min. The results of the ANOVA confirmed that the effects of the current density, electrolyte temperature and flow rate are significant at the 95% confidence level. The increase in the contact area and contact force afforded by using the round bus bar improved the current efficiency which, in turn, reduced the amount of waste acids generated. Further research is planned to investigate the effect of the type of bus bar on the current efficiency.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.50-56
• /
• 2017

The perimeter structure in high-rise buildings, which plays a major role in resisting lateral forces, is generally formed by the orthogonal placement of the beam and column, but currently various grid patterns are implemented. In a previous study, the adaptability of the $IsoTruss^{(R)}$ grid (ITG) as a perimeter structure was examined. In this study, a method of estimating the required cross sectional area of a member in a preliminary design is proposed. The members of the perimeter structure are placed in three planes, perpendicular (PPR), parallel (PPL) and oblique (POQ) to the lateral loading, and the stiffness of the members in the POQ was taken into account by projecting them onto the PPL or PPR. Three models are established for member size zoning through the height of the building, in order to investigate the effect of the shear and moment in the calculation of the required cross sectional area. To examine the effectiveness of this study, a 64-story building is designed and analyzed. The effect of the member size zoning was examined by comparing the maximum lateral displacement, required steel amount, and axial strength ratio of the columns. Judging from the maximum lateral displacement, which was 97.3% of the allowable limit, the proposed formula seems to be implemental in sizing the members of an ITG structure at the initial stage of member selection.

• Journal of the Institute of Convergence Signal Processing
• /
• v.19 no.3
• /
• pp.139-146
• /
• 2018

Underwater acoustic communication can be applied to various area such as scientific, commercial and military survey using Autonomous Underwater Vehicles and Unmanned Underwater Vehicles. Underwater communication is studying very actively by advanced country like United States. But differ from wireless communication in the air, underwater acoustic communication has some difficult problems, ISI(Inter Symbol Interference) due to multipath and limit of transmission bandwidth due to slow propagation of sound wave. In this paper, SC-FDE and OFDM transmission system for the cancellation of ISI in conjunction with underwater acoustic channel modeling are applied to the underwater simulation of communication. The performance of these methods in the simulation guide to possibility of adopting in underwater acoustic communication algorithm. For this purpose, we compare SER performance of SC-FDE with that of OFDM for modelled underwater channel. Underwater channel is generated by Bellhop model. Simulation results show above 5dB SNR gain at 10-3 SER. And it demonstrate SC-FDE is efficient method for underwater acoustic communication.

• Environmental and Resource Economics Review
• /
• v.14 no.2
• /
• pp.337-379
• /
• 2005

This choice experiments study values the non-market benefits of water quality improvements in Paldang Reservoir and Han River, located in Korea. A fractional factorial orthogonal design was used to produce four different choice sets per respondent, before employing choice examples to screen out irrational responses. The panel mixed logit model (with normal distributions for the attributes) fit the data best, indicating that allowing for both heterogeneous preferences across households and correlation between repeated choices may represent actual choice behaviors best of all the estimated models. The significant standard deviations of the random attributes suggest that the taste for each attribute may vary considerably in the population. The annual benefits to the Seoul Metropolitan area for a small (large) enhancement of the clarity of water, a gradual removal of unpleasant waters, and a gradual improvement in biodiversity, were estimated to be some 1.5 trillion (1.7 trillion) Won, 2 trillion Won, and 1.7 trillion Won, respectively, with 1.8~2.6 trillion Won for at least two of them occurring together. The study also discusses potential biases germane to choice experiments studies of this type.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.3
• /
• pp.171-178
• /
• 2014

From now on, in order to meet more stringer diesel emission standard, diesel vehicle should be equipped with emission after-treatment devices as NOx reduction catalyst and particulate filters. Urea-SCR is being developed as the most efficient method of reducing NOx emissions in the after-treatment devices of diesel engines, and recent studies have begun to mount the urea-SCR device for diesel passenger cars and light duty vehicles. That is because their operational characteristics are quite different from heavy duty vehicles, urea solution injection should be changed with other conditions. Therefore, the number and diameter of the nozzle, injection directions, mounting positions in front of the catalytic converter are important design factors. In this study, major design parameters concerning urea solution injection in front of SCR are optimized by using a CFD analysis and Taguchi method. The computational prediction of internal flow and spray characteristics in front of SCR was carried out by using STAR-CCM+7.06 code that used to evaluate $NH_3$ uniformity index($NH_3$ UI). The design parameters are optimized by using the $L_{16}$ orthogonal array and small-the-better characteristics of the Taguchi method. As a result, the optimal values are confirmed to be valid in 95% confidence and 5% significance level through analysis of variance(ANOVA). The compared maximize $NH_3$ UI and activation time($NH_3$ UI 0.82) are numerically confirmed that the optimal model provides better conversion efficiency of $NH_3$. In addition, we propose a method to minimize wall-wetting around the urea injector in order to prevent injector blocks caused by solid urea loading. Consequently, the thickness reduction of fluid film in front of mixer is numerically confirmed through the mounting mixer and correcting injection direction by using the trial and error method.