• Korean journal of food and cookery science
• /
• v.20 no.1
• /
• pp.76-80
• /
• 2004

The potato tubers of Solanum tuberosum L. contain potato glycoalkaloids (PGA), a class of naturally occurring toxicants. The primary constituents of this class of compounds in potatoes are $\alpha$-chaconine and $\alpha$-solanine. The purpose of this study was to examine the effects of various cooking methods on the PGA contents in the common Korean potato Irish Cobbler variety and those in commercially produced potato products consumed in Korea. After cooking, most potatoes showed big decreases in their PGA contents compared to the uncooked samples, with the exception of baked potatoes, which maintained 90.86％ of their PGA contents. The PGA levels in boiled and blanched potatoes were reduced by 91.68 and 84.17％, respectively. However, the levels in samples boiled in 1％ salted water were only reduced by 52.10％. Potatoes fried and sauteed in oil had their PGA contents reduced to 49.42 and 49.51％ of their original levels. The reductions in the relative PGA contents by cooking method were in the order boiling〉blanching〉boiling with 1％ NaCl〉steaming〉sauteing〉frying〉microwaving〉baking. The highest remaining PGA content of the potato products in Korea was in potato chips, at 69.57mg/100g, but made with imported potatoes.

• Journal of Korea Multimedia Society
• /
• v.14 no.5
• /
• pp.669-680
• /
• 2011

R-trees are widely used in various areas such as geographical information systems, CAD systems and spatial databases in order to efficiently index multi-dimensional data. As data sets used in these areas grow in size and complexity, however, range query operations on R-tree are needed to be further faster to meet the area-specific constraints. To address this problem, there have been various research efforts to develop strategies for acceleration query processing on R-tree by using the buffer mechanism or parallelizing the query processing on R-tree through multiple disks and processors. As a part of the strategies, approaches which parallelize query processing on R-tree through Graphics Processor Units(GPUs) have been explored. The use of GPUs may guarantee improved performances resulting from faster calculations and reduced disk accesses but may cause additional overhead costs caused by high memory access latencies and low data exchange rate between GPUs and the CPU. In this paper, to address the overhead problems and to adapt GPUs efficiently, we propose a novel approach which uses a GPU as a buffer to parallelize query processing on R-tree. The use of buffer algorithm can give improved performance by reducing the number of disk access and maximizing coalesced memory access resulting in minimizing GPU memory access latencies. Through the extensive performance studies, we observed that the proposed approach achieved up to 5 times higher query performance than the original CPU-based R-trees.

• Current Research on Agriculture and Life Sciences
• /
• v.5
• /
• pp.33-39
• /
• 1987

In order to study the degradation pattern of propanil in solution, the environmental factors such as temperature, pH and UV irradiation effect on propanil degradation were investigated. The degradation of propanil in solution was more rapid in high temperature than in low. The production amount of DCA was increased in high temperature, and then was decreased in a certain period of time because of conversion to TCAB, but the concentration of TCAB was maintained without more degradation. Propanil was rapidly hydrolyzed in alkaline solution as well as in strong acidic solution. Degradation product, DCA was rapidly produced and condensed to TCAB in strong acidic and alkaline condition. On exposur to ultraviolet light, 90% of original propanil was degraded within 20minutes, 0.3 ppm of DCA was produced in 10 minutes, and maintained the concentration throughout irradiation times.

• The Journal of Art Theory & Practice
• /
• no.5
• /
• pp.7-24
• /
• 2007

The subject is connected with a structure named "The Symbolic" to Lacan, but he denied that the subject is explained simply as a fruit of language and "Other". From his point of view, passing through Subject, De-formation and Crack over it is designated as foundation of generation and creation rather than our destined defect. It should not be understood that subject of "The Real" is a concept of the subject free itself from restraint of "The Symbolic". However, this does not mean he asserts "Subject" is something incapable of being controlled by the unknown power. The problem is that this autonomous existence meets inside of it with something "more than one's own self" by "circulating around itself" like a permanent star. This is the indication of a "stranger in the middle of my privacy", or "extimit$\'{e}$", a coined-word by Lacan. Perhaps "Subject" is nothing more than the name of distance of object which is "too hot" to come close, and of this circulating movement. It's because of this object that the real subject stands against generalization and the subject can't be restored to any place in symbolic order-even though it is empty. The part which is told from Lacan's structural theory, that is to say, an importance to Lacan is that his Subject theory is not suggested or denied as a manual structure. On the contrary, it is a study of the relationship between the settled symbol that included in "real subject which is a unconscious one" and the symbolic subject hold- that is a metaphysical subject in general meaning. In Lacan's enlarged concept of subject beyond symbolic reality, it is noticeable that it gives justifiability to the union of a medium of different nature in artistic expression. We can recognize that the unconscious world is a living space which enables it to be a "condition of human being", not something dark under the surface of water through Magritte's(Rene Magritte, 1898~1967) surrealistic works. In other words, Magritte's art secures a core dimension of human nature through a mysterious gap of conscious and settled space. Magritte's drawings often evokes strange and unsettling feelings in people who view his paintings. This is because routine objects are found in "unsuitable" places from which we usually find them in our everyday lives. "Reality" in Magritte's paintings makes it aware that it is a strained field of concealment and disclosure basically between truths, and we can learn that his behavior to overturn to paint in-visible things is finally an effort to restore the "real subject" to the viewer's reality. In other words, such reversion arouses a nostalgic desire for the objects existing in their original appearance as they are - natural condition that our gaze had not been distorted yet by anamorphic stains. - and the state when we are conscious of them normally. Such desire offers an opportunity for us to get out of mental depression rather than operates to us as an abnormal crack. It's a successive process of effort to search for lost subject and Paradise Lost facing up to reality of subject human that is to be a subject of world and life are ousted from their place by structure and authority of culture.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.5
• /
• pp.32-42
• /
• 2018

Since the success or failure of VE projects depends on the capabilities of participants, including owners, construction managers, architects, general contractors and VE experts, it is important to follow systematic procedures. However, it is often the case that only a rough evaluation is performed, or the rough and detailed evaluations are integrated in actual VE tasks. In this case, it is difficult to analyze and evaluate the alternatives in terms of risk, even for the important alternatives. This in turn leads to the so-called returning alternatives where the alternatives proposed in the preceding stage are returned to the original plans in the following stage, and thus the repetitive work for the alternatives often decreases the efficiency of the VE task. In this regard, this study proposed a risk assessment process for VE alternatives in order to minimize the occurrence of returning alternatives based on the systematic analysis and evaluation of VE alternatives. It will increase the efficiency of VE tasks by reduces the number of regression alternatives.

• Korean Journal of Remote Sensing
• /
• v.35 no.5_1
• /
• pp.637-647
• /
• 2019

The detection of crop stress is an important issue for the accurate assessment of yield decline. The photochemical reflectance index (PRI) was developed as a remotely sensed indicator of light use efficiency (LUE). The PRI has been tested in crop stress detection and a number of studies demonstrated the feasibility of using it. However, only few studies have focused on the use of PRI from remote sensing imagery. The monitoring of PRI using drone and satellite is made difficult by the low spectral resolution image captures. In order to estimate PRI from multispectral sensor, we propose a band fusion method using adjacent bands. The method is applied to the drone-based hyperspectral and multispectral imagery and estimated PRI explain 79% of the original PRI. And time series analyses showed that two PRI data (drone-based and SRS sensor) had very similar temporal variations. From these results, PRI from multispectral imagery using band fusion can be used as a new method for evaluation of crop stress.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.89-96
• /
• 2008

This paper investigates the effect of blade deformation, caused by manufacturing inaccuracies, on the performance of a 2-stage axial steam turbine. A high fidelity 3D coordinate Measurement Machine has been employed to obtain the exact geometrical model of the blades. A Streamline Curvature solver was used to predict the overall performance of the turbine. During the manufacturing process of the casts and of the blades themselves, several types of errors can occur which lead to a different geometry from that envisaged by the designer. The main objective of this study is to investigate the effect of those errors on the performance of a 2-stage experimental axial steam turbine. A high fidelity measurement of the actual geometry of both stator and rotor blades has been carried out, using a 3D Coordinate Measurement Machine. The cross sections of the blades obtained by the measurement were compared with those produced by the design process to evaluate the change in blade inlet/exit angles. In addition, the geometrical deviations from the initial design have been subjected to a statistical study in order to locate the nature of the error. The actual(measured) model has been used as input into a Streamline Curvature solver to evaluate its performance. Finally, a comparison with the performance plots of the original geometry has been carried out. A measurable change of efficiency as well as in the total power delivered by the turbine was found. This suggests that the accumulated error caused during the manufacturing procedure plays a significant role in the overall performance of the machine by making it less efficient by more than 1%. Reverse engineering techniques are proposed to predict and alleviate these errors leading thereby to a final design of each stage with improved performance.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.4
• /
• pp.467-474
• /
• 2018

The purpose of this study is related to automatic hull-form design for ships operating at two speeds. Research was conducted using a series 60 ($C_B=0.6$) ship as a target, which has the most basic ship hull-form. Hull-form development was pursued from the viewpoint of improving resistance performance. In particular, automatic hull-form design for a ship was performed to improve wave resistance, which is closely related to hull-forms. For this purpose, we developed automatic hull-form design software for ships by combining an optimization technique, resistance prediction technique and hull-form modification technique, appling the software developed to a target ship. A sequential quadratic programming method was used for optimization, and a potential-based panel method was used to predict resistance performance. A Gaussian-type modification function was developed and applied to change the ship hull-form. The software developed was used to design a target ship operating at two different speeds, and the performance of the resulting optimized hull was compared with the results of the original hull. In order to verify the validity of the program developed, experimental results obtained in model tests were compared with calculated values by numerical analysis.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.11
• /
• pp.137-147
• /
• 2014

The study aims at exploring motivation, rationale, and values in twitter users' retweet behavior. It proposes that diffusion of message is based on the complex interactional relationships among attributes of original message, user's rationale, and values. Based on a pilot study, we constructed a total of 34 questions asking message attributes, motivation, and values of retweeting. Then, twitter users participated in an online survey, in which they evaluate their own 5 retweet messages based on the constructed questions(5 messages ${\times}$ 34 questions = 170). Then, a factor analysis is done in order to see the dimensions of the concepts in retweet behavior; and understand how message attributes, motivations, and values are inter-related with each other. The main factors extracted were: (1) public fairness, (2) fun and playfulness, (3) communal help, (4) news and information, etc. Factor 2 and 4 show the traditional journalism characteristics; while factor 1 and 3 do alternative journalistic values. The latter may work as a rectifying factors for traditional journalism; however, backfiring mechanism for group polarization. In addition, (1) users' internal identities, (2) communal unity and (3) belongness were identified as rationales and values for retweet behavior.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.21 no.4
• /
• pp.228-236
• /
• 2008

Purpose: The purposes of this study is to provide basic informations on oriental medical research and treatment through analysis of breast cancer patients, who visited M $\mu$ integrative cancer center, O O university East-West neo medical center. Methods: Electronic medical records of 106 breast cancer patients who visited oriental medical center from June 2, 2006 to February 28, 2008 were selected to collect clinical data of those patients. Clinical data were analyzed for types of clinical characteristics, and received therapies. For analysis of survival and recurrence, Kaplan-Meier method was used. All the data were processed and analyzed using SPSS version 13.0. Results: Average age of breast cancer patients, who visited oriental medical center was 48.72 ($\pm$10.13). The stage distribution record indicated stage I (5.8%), stage II (7.0%), stage III (5.8%), and stage IV (81.4%). Original purposes of patients were analyzed to be supplementary treatment for western therapy (68.9%), treatment for recurrence prevention (18.9%), and oriental medical treatment (12.2%) in order. While receiving oriental medical treatment, 60.4% of patients received conventional medical treatment simultaneously. Conclusion: Majority of patients who visited oriental medical hospital were stage IV at terminal stage and mainly visited for the purpose of supportive care. Further clinical study of breast cancer patients is needed to validate the effectiveness of oriental medical treatment based on this study.