• Journal of the Korea Concrete Institute
• /
• v.11 no.3
• /
• pp.35-45
• /
• 1999

Recently, many strengthening methods are developed to repair damaged structures, especially, steel plate or carbon fiber sheet bonding methods are widely used. For the bonding methods, the strengthening materials are bonded when the original structure is under loading, which causes difference of initial stresses between original member and bonded material. However, current design method or theory, which mostly depends on ultimately strength design, cannot account the difference of initial stresses between members, and it disregards the reduction of nominal strength. In this study, a new strengthening design theory and program which can account the difference of initial stresses are developed, and applied to the case when a structure in service is repaired. In order to verify the validity of the theory and the program, a test result is referred and compared with the results and it is showed that the calculated values are almost same as the referred data and finally proved that the program is reliable. The results showed that the amount of strengthening material depends on the status of damages of structure, and the nominal strength is reduced depending on the degree of damages.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.1174-1176
• /
• 1993

Morphology of low density polyethylene(LDPE) such as the degree of crystallinity changes with thermal history etc. In order to clarify the effects of morphological changes on electrical breakdown, we studied direct current and impulse breakdown phenomena of LDPE films heat-treated at 100[$^{\circ}C$] for 1[H] in silicone oil and subsequently cooling to various ways. The degree of crystallinity was estimated by the infra red absorption and X-ray diffraction measurements for the specimens of slowly cooled, cooled in water, original, and cooled in liquid nitrogen gas. As the result, we obtained that the first, second, third, and fourth was slowly cooled of 70.23[%], cooled in water of 61.6[%], original specimen of 56.75[%], and cooled in liquid nitrogen gas of 34.7[%] respectively. The crystalline size and distribution of specimens were researched by Differential scanning calolimeter measurements.

• Proceedings of the KIEE Conference
• /
• 1994.11a
• /
• pp.326-328
• /
• 1994

A modified Kohonen's simple Competitive Learning(SCL) algorithm which has binary reinforcement function and a constant adaptation gain is proposed. In contrast to the time-varing adaptation gain of the original Kohonen's SCL algorithm, the proposed algorithm uses a constant adaptation gain, and adds a binary reinforcement function in order to compensate for the lowered learning ability of SCL due to the constant adaptation gain. Since the proposed algorithm does not have the complicated multiplication, it's digital hardware implementation is much easier than one of the original SCL.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2289-2291
• /
• 2001

In this paper, a novel sliding surface is proposed by defining a novel virtual state. This sliding surface has nominal dynamics of an original system and makes it possible that the Sliding Mode Control(SMC) technique is used with the various types of controllers. Its design is based on the augmented system whose dynamics have a higher order than that of the original system. The reaching phase is removed by using an initial virtual state which makes the initial sliding function equal to zero.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.11
• /
• pp.886-894
• /
• 2012

In order to develop electrical insulation materials, epoxy-nanosilica-microsilica mixture composites (ENMC) was synthesized, and mechanical properties such as their tensile and flexural strength, and AC insulation breakdown strength were investigated. Properties of mechanical strength and AC insulation breakdown strength are analyzed as scale and shape parameter with respect to weibull plot. Their tensile and flexural strength, AC insulation breakdown strength were compared original epoxy or EMC to ENMC. The 4 phr nano-silica addition and the 65 wt% micron-silica mixture composite (ENMC) was found to have the highest tensile and flexural strength. In the tensile strength was improved 29%, and flexural strength was improved 60.9% higher than those of the original epoxy. In the insulation breakdown strength, ENMC_4 phr was improved 17% and ENMC_5 phr was improved 15.8% higher than those of the EMC.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04b
• /
• pp.568-570
• /
• 2004

The error-backpropagation (EBP) algerithm for training multilayer perceptrons (MLPs) is known to have good features of robustness and economical efficiency. However, the algorithm has difficulty in selecting an optimal constant learning rate and thus results in non-optimal learning speed and inflexible operation for working data. This paper Introduces an elastic learning rate that guarantees convergence of learning and its local realization by online upoate of MLP parameters Into the original EBP algorithm in order to complement the non-optimality. The results of experiments on a speaker verification system with Korean speech database are presented and discussed to demonstrate the performance improvement of the proposed method in terms of learning speed and flexibility fer working data of the original EBP algorithm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.152-155
• /
• 2009

In this paper, we propose the image encryption method using complemented MLCA based on 90/150 NBCA(Null Boundary Cellular Automata). The encryption method is processed in the following order. First, complemented MLCA, which is derived from linear LFSR, is used to produce a PN(pseudo noise) sequence, which matches the size of the original image. Then, the created complemented MLCA sequence goes through a XOR operation with the original image to become encrypted. Lastly, an experiment is processed to verify the effectiveness of this method.

• International Journal of Reliability and Applications
• /
• v.5 no.2
• /
• pp.81-103
• /
• 2004

Improvements of a bridge network system are studied in this paper. Then equivalence between different improved designs of the bridge network system is discussed. Three different methods are used to get different better designs of the network in the sense of having higher reliability and mean time to failure. Then two different types of reliability equivalence factors of the system are derived. It is assumed here that the failure rates of the system's components are identical and constant. The reliability functions and mean time to failure of the original and improved designs of the network are derived. Comparison between the mean time to failures of the original system and improved designs of the system are presented. Numerical studies and conclusion are presented in order to explain how one can apply the the theoretical results obtained.

• The Korean Journal of Archival Studies
• /
• no.2
• /
• pp.103-128
• /
• 2000

The classification of records is basically different from that of librarian materials because records have a nature of spontaneous and correlated product made during the process of work, as well as a value of proof and information. Hence the main task of archival management institute is to classify those records through the process of transfer and receipt for the purpose of reservation and utilization of their value. Therefore, the records should be classified by the manner, which reflects the function and organization of producing institute, and in turn, the principles of producing site and original record order should be maintained for this purpose. The characteristics of librarian materials and records and the tasks of management institutes form the basis of very different principles. The records can present the characteristics of producing institute and maintain the value made by the correlated nature as they are classified, managed and preserved by the above principles, In addition, it is known how and why they were produced and utilized, as well as they can be preserved in original form and effectively arranged, recorded and managed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.57-58
• /
• 2014

Digital filter is very important role in signal processing system. In general, input signal is determined by transfer function of the digital filter. But if input signal was exposured in various sound environment, it is difficult to verify its original source. In this paper, inverse problem in order to extract original input signal from noisy environment is considered.