• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.723-727
• /
• 2003

[ $Sr_xBa_{1-x}Nb_2O_6$ ] (SBN, $0.25{\leq}x{\leq}0.75$) ceramic is a ferroelectric material with tetragonal tungsten bronze (TTB) type structure, which has a high pyroelectric coefficient and a nonlinear electro-optic coefficient value. In spite of its advantages, SBN has not been investigated well compared to other ferroelectric materials with perovskite structure. In this study, SBN thin film was manufactured by ion beam sputtering technique using the prepared SBN target in $Ar/O_2$ atmosphere. SBN30 thin film of $1000{\AA}$ was pre-deposited as a seed layer on $Pt(100)/TiO_2/SiO_2/Si$ substrate followed by SBN60 deposition up to $3000{\AA}$ in thickness. As-deposited SBN60/SBN30 layer was heat-treated at different temperatures of 650, 700, 750, and $800^{\circ}C$ in air, respectively The crystallinity and orientation behavior as well as electric properties of SBN60/SBN30 multi-layer were examined. The deposited layer was uniform and the orientation was shown primarily along (001) plane from XRD pattern. There was no difference in the crystal structure with heat-treatment temperature, but the electric properties depended on the heating temperature and was the best at $750^{\circ}C$. In electric properties of Pt/SBN60/SBN30/Pt thin film capacitor prepared, the remnant polarization (2Pr) value was $15{\mu}C/cm^2$, the coercive field (Ec) 75 kV/cm, and the dielectric constant 1075, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.869-873
• /
• 2004

[ $Sr_xBa_{1-x}Nb_2O_6$ ] (SBN, $0.25{\leq}x{\leq}0.75$) ceramic is a ferroelectric material with tetragonal tungsten bronze (TTB) type structure, which has a high pyroelectric coefficient, piezoelectric, and a photo refractive properties. In this study, SBN60(x=0.6) thin film was manufactured by ion beam sputtering technique. Using the prepared SBN60 target in $Ar/O_2$ atmosphere as-deposited SBN60 thin film on Pt(100)/$TiO_2/SiO_2/Si$ substrate crystallization and orientation behavior as well as electric properties of SBN60 thin film were examined. SBN60 deposition up to $3000{\AA}$ in thickness, SBN60 thin film was heat-treated at $650^{\circ}C{\sim}800^{\circ}C$. The orientation was shown primarily along (001) plane from XRD pattern where working pressure was $4.3{\times}10^{-4}$ torr. The deposited layer was uniform, preferred orientatin and crystallization behavior resulted in the change of $O_2$ ratio was observed. In electric propertie of Pt/SBN60/Pt thin film capacitor remnant polarization (2Pr) value was $10{\mu}C/cm^2$, the coercive filed (Ec) 50 kV/cm, and the dielectric constant 615, respectively.

• 한국측량학회지
• /
• 제32권3호
• /
• pp.205-216
• /
• 2014

Multi-camera systems have been widely used as cost-effective tools for the collection of geospatial data for various applications. In order to fully achieve the potential accuracy of these systems for object space reconstruction, careful system calibration should be carried out prior to data collection. Since the structural integrity of the involved cameras' components and system mounting parameters cannot be guaranteed over time, multi-camera system should be frequently calibrated to confirm the stability of the estimated parameters. Therefore, automated techniques are needed to facilitate and speed up the system calibration procedure. The automation of the multi-camera system calibration approach, which was proposed in the first part of this paper, is contingent on the automated detection, localization, and identification of the object space signalized targets in the images. In this paper, the automation of the proposed camera calibration procedure through automatic target extraction and labelling approaches will be presented. The introduced automated system calibration procedure is then implemented for a newly-developed multi-camera system while considering the optimum configuration for the data collection. Experimental results from the implemented system calibration procedure are finally presented to verify the feasibility the proposed automated procedure. Qualitative and quantitative evaluation of the estimated system calibration parameters from two-calibration sessions is also presented to confirm the stability of the cameras' interior orientation and system mounting parameters.

• 한국재료학회지
• /
• 제1권1호
• /
• pp.54-61
• /
• 1991

$YBa_2Cu_3O_{7-\delta}$ 단일 타게트를 사용하여 R. F. 마그네트론 스퍼터링법으로 MgO(100), Si(100)기판 위에 박막을 증착한 후, $880^{\circ}C$의 산소 분위기에서 1시간 동안 열처리를 하였다. 열처리 전 박막의 미세한 조성변화에 의해서도 열처리 후 박막의 미세구조 및 전기적 특성은 크게 변화했다. MgO(100)기판의 표면에 성장되는 입자들은 선택 배향적으로 성장하려는 경향을 가지므로 가늘고 길쭉한 입자 형상을 띠는 반면에 이들 입자위에 성장되는 다른 입자들은 결정 성장 방향의 선호도가 없으므로 둥근 모양의 입자형상을 가진다. 열처리 전 박학의 조성이 1-2-3을 벗어나면 증착 후 열처리할 때 액상이 형성되며, 액상의 양이 많을수록 선택 배향적 성장이 용이해져 texture를 쉽게 이룬다. 그러나 이러한 액상은 냉각 시에 초전도입자의 입계에 이차상으로 형성되기 때문에 초전도 박막의 전기적 특성, 특히 임계온도를 저하시킨다. 또한 $T_{c,\;zero}$는 $T_{c,\;on}$에 비해서 입계에 형성되는 이차상의 영향을 더 크게 받는다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 제5회 영호남 학술대회 논문집
• /
• pp.85-88
• /
• 2003

$Sr_xBa_{1-x}Nb_2O_6$(SBN, $025{\leq}x{\leq}0.75$) ceramic is a ferroelectric material with tetragonal tungsten bronze (TTB) type structure, which has a high pyroelectric coefficient and a nonlinear electro-optic coefficient value. In spite of its advantages, SBN has not been investigated well compared to other ferroelectric materials with perovskite structure. In this study, SBN thin film was manufactured by ion beam sputtering technique using the prepared SBN target in Ar/$O_2$ atmosphere. SBN30 thin film of 500 ${\AA}$ was pre-deposited as a seed layer on Pt(l00)/$TiO_2$/$SiO_2$/Si substrate followed by SBN60 deposition up to 4500 ${\AA}$ in thickness. SBN60/SBN30 layer was deposited at different Oxygen amount of 0, 8.1, 17, and 31.8 sccm, respectively. The crystallinity and orientation behavior as well as electric properties of SBN60/SBN30 multi-layer were examined. The deposited layer was uniform and the orientation was shown primarily along (001) plane from XRD pattern. The crystal structure and the electric properties depended on the Oxygen amount, heating temperature and was the best at O2 = 8.1 seem, $750^{\circ}C$. In electric properties of Pt/SBN60/SBN30/Pt thin film capacitor prepared, the remnant polarization (2Pr) value was 13 ${\mu}C/cm^2$, the coercive field (Ec) 75 kV/cm, and the dielectric constant 1492, respectively.

• 한국세라믹학회지
• /
• 제50권6호
• /
• pp.551-556
• /
• 2013

AlN films with c-axis orientation and thermal conductivity characteristics were deposited by using Pulsed Laser Deposition and the films were characterized by changing the deposition conditions. In particular, we investigated the optimal conditions for the application of a heat sinking plane AlN thin film. Epitaxial AlN films were deposited on sapphire ($c-Al_2O_3$) single crystals by pulsed laser deposition (PLD) with an AlN target. AlN films were deposited at a fixed pressure of $2{\times}10^{-5}$ Torr, while the substrate temperature was varied from 500 to $700^{\circ}C$. According to the experimental results of the growth temperature of the thin film, AlN thin films were confirmed with a highly c-axis orientation, maximum grain size, and high thermal conductivity at $650^{\circ}C$. The thermal conductivity of the AlN thin film was found to increase compared to bulk AlN near the band gap value of 6.2 eV.

• 센서학회지
• /
• 제5권3호
• /
• pp.87-92
• /
• 1996

Pb과잉인 PLT 타겟을 이용하여 MgO(100) 단결정 기판위에 고주파 마그네트론 스펏터링법으로 PLT박막을 제조하였으며, c-축 배향에 따른 물리적 및 전기적 특성을 조사하였다. PLT박막의 c-축 배향성은 제조조건에 따라 변화하며, 본 연구에서의 제조조건은 기판온도가 $640^{\circ}C$, 분위기압이 10 mTorr, $Ar/O_{2}$비가 10 및 고주파 전력밀도가 $1.7 W/cm^{2}$이었다. 이러한 조건에서 제조된 PLT 박막은 표면에서의 Pb/Ti 비가 1/2, 저항률이 $8{\times}10^{11}{\Omega}{\cdot}cm$ 및 비유전률이 110 이었다. PLT박막을 이용하여 초전형 적외선 센서를 제조하였으며, 제조된 적외선 센서의 피크 대 피크 전압은 450 mV, 신호대 잡음비는 7.2 였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.271-274
• /
• 2003

[ $Sr_xBa_{1-x}Nb_2O_6$ ] (SBN, $0.25{\leq}x{\leq}0.75$) ceramic is a ferroelectric material with tetragonal tungsten bronze (TTB) type structure, which has a high pyroelectric coefficient and a nonlinear electro-optic coefficient value. In spite of its advantages, SBN has not been investigated well compared to other ferroelectric materials with perovskite structure. In this study, SBN thin film was manufactured by ion beam sputtering technique using the prepared SBN target in $Ar/O_2$ atmosphere. SBN30 thin films of different thickness were pre-deposited as a seed layer on $Pt(100)/TiO_2/SiO_2/Si$ substrate followed by SBN60 deposition up to $4500\;{\AA}$ in thickness. As-deposited SBN60/SBN30 layer was heat-treated at different temperatures of 650, 700, 750, and $800\;^{\circ}C$ in air, respectively, The crystallinity and orientation behavior as well as electric properties of SBN60/SBN30 multi-layer were examined. The deposited layer was uniform and the orientation was shown primarily along (001) plane from XRD pattern. There was difference in the crystal structure with heat-treatment temperature, and the electric properties depended on the heating temperature and the seed-layer thickness. In electric properties of Pt/SBN60/SBN30/Pt thin film capacitor prepared, the remnant polarization (2Pr) value was $15\;{\mu}C/cm^2$, the coercive field (Ec) 65 kV/cm, and the dielectric constant 1492, respectively.

• Advances in nano research
• /
• 제7권1호
• /
• pp.39-49
• /
• 2019

This paper focuses on two main objectives. The first one is to exploit an energy equivalent model and finite element method to evaluate the equivalent Young's modulus of single walled carbon nanotubes (SWCNTs) at any orientation angle by using tensile test. The calculated Young's modulus is validated with published experimental results. The second target is to exploit the finite element simulation to investigate mechanical buckling and natural frequencies of SWCNTs. Energy equivalent model is presented to describe the atomic bonding interactions and their chemical energy with mechanical structural energies. A Program of Nanotube modeler is used to generate a geometry of SWCNTs structure by defining its chirality angle, overall length of nanotube and bond length between two adjacent nodes. SWCNTs are simulated as a frame like structure; the bonds between each two neighboring atoms are treated as isotropic beam members with a uniform circular cross section. Carbon bonds is simulated as a beam and the atoms as nodes. A finite element model using 3D beam elements is built under the environment of ANSYS MAPDL environment to simulate a tensile test and characterize equivalent Young's modulus of whole CNT structure. Numerical results are presented to show critical buckling loads, axial and transverse natural frequencies of SWCNTs with different orientation angles and lengths. The understanding of mechanical behaviors of CNTs are essential in developing such structures due to their great potential in wide range of engineering applications.

• Asia Marketing Journal
• /
• 제14권2호
• /
• pp.23-37
• /
• 2012

Individuals often make their judgments on the basis of the ease or difficulty with which information comes to mind (for reviews, see Greifeneder, Bless, and Pham 2010; Schwarz 1998, 2004). Recent research, however, has documented that variables known to determine the degree of cognitive resources invested in information processing such as personal relevance (Grayson and Schwarz 1999; Rothman and Schwarz 1998), accuracy motivation (Aarts and Dijksterhuis 1999), and processing capacity (Menon and Raghubir 2003) can affect the extent to which individuals draw on metacognitive difficulty in making their judgments. The primary aim of this research is thus to investigate whether individuals with substantial cognitive resources or those with lack of cognitive resources are more likely to draw on metacognitive difficulty when making their product evaluations. The findings from two laboratory experiments indicate that individuals who perceive a greater level of fit between their self-regulatory orientation and temporal construal (Experiment 1), and between their self-construal and the type of product benefit appeal (Experiment 2) are more likely than those who perceive the lack of such fit to evaluate a target product less positively after thinking of many rather than a few positive reasons. The findings provide supporting evidence for the two-stage backward inference process involved with the effect of metacognitive difficulty on consumer judgments in that consumer judgments based on metacognitive difficulty may require greater cognitive resources than those based on the content of information generated. Also, the current research documents further empirical evidence for the relationship between self-regulatory orientation-construal level fit and cognitive resources such that perceived regulatory-construal level fit can increase consumer willingness to invest cognitive resources into their judgment tasks. Last, the findings can help marketers differentiate purchase situations where asking consumers to think of many positive benefits from purchase situations where asking consumers to think of a few key benefits is relatively more beneficial.