• 한국전기전자재료학회논문지
• /
• 제26권2호
• /
• pp.126-133
• /
• 2013

This paper presents a study on the dispersion effect of the X-Ray diffraction, glass transition and DMA properties of organic modifier clay/epoxy nanocomposites produced in a homogenizer. Several experiments were conducted including different types of dispersion condition with varying processing conditions such as homogenizer rotor speed and applied time of homogenizer. The effects of these variables on the dispersion properties of nanocomposites were then studied. In order to fully understand the experimental results, a X-ray diffraction, DSC and DMA were used to investigate the effect of above mentioned variables on microstructure and intercalation/exfoliation of organic modifier clay/epoxy nanocomposites. The results from this work could be used to determine the best processing condition to obtain appropriate levels of d-spacing, glasss transition temperature and storage modulus in organic modifier clay/epoxy nanocomposites.

• Macromolecular Research
• /
• 제15권2호
• /
• pp.178-184
• /
• 2007

A poly(ethylene terephthalate) (PET)/organosilicate nanocomposite, with enhanced mechanical properties, has been prepared using the melt intercalation method. For this purpose, a new organic modifier has been synthesized for the preparation of organosilicate, which is thermally stable and compatible with PET. The use of the new organosilicate yielded almost exfoliated PET nanocomposite; whereas, the PET nanocomposites prepared by use of commercial organoclays (Cloisite 15A and 30B) show only an intercalated morphology. Particularly, the use of the new organosilicate showed an enhanced tensile modulus, and without sacrifice of the tensile strength and elongation on breaking, while the use of commercial organoclays only exhibit a trade-off between those mechanical properties.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제11권1호
• /
• pp.1-6
• /
• 2006

Ionic liquids are receiving an upsurge of interest as 'green' solvents; primarily as replacements for conventional media in chemical processes. Although ionic liquids are rather 'young' modifier, their great potential in high-performance liquids chromatography (HPLC) has already been demonstrated. This review presents an overview of the applications of ionic liquids as mobile phase modifiers in HPLC.

• 한국재료학회지
• /
• 제13권11호
• /
• pp.725-731
• /
• 2003

The effect of organic processing parameters on the dispersion stability of the BaTiO$_3$-based dielectric particles and borosilicate glass particulate suspensions was investigated in a system where organic solvents, dispersant, binder and modifier were used as processing additives in a low temperature cofired ceramic fabrication processes. Two- and three-component organic solvents were used to disperse ceramic particles and it was found the better stability in the particulate suspension prepared in a bi-solvent, which was consists of toluene and ethanol in a non-azeotropic composition. The addition amount of organic additives had a great impact on dispersion in the present investigation. The flow curves of the suspensions prepared with binder and modifier were fitted according to the power-law equation, which indicates that the internal structure of the suspension could be disturbed under the applied shear stress. Finally, the LTCC green tapes were successfully tape-cast based upon the optimum formulation of LTCC suspension and its microstructure was compared with that of the hard-agglomerates.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제6권1호
• /
• pp.37-41
• /
• 2001

HPLC separation of ionic samples tends to be more complicated and difficult to understand than that of non-ionic compounds. On the other hand, band spacing is much more easily manipulated for ionic than for neutral samples. Ion-suppression RP-HPLC method was used with organic modifier and aqueous buffer solution. In this work, five mononucleotides of cytidine-5-monophosphate (5-CMP) disodium salt, uridine-5-monophosphate disodium salt (5-UMP), guanosine-5-monophosphate disodium salt (5-GMP), inosine-5-monophosphate disodium salt (5-IMP), and adenosine-5-monophosphate disodium salt (5-AMP) were examined. Acetic acid and sodium phosphate were used as buffers, and methanol as an organic modifier. A new relationship between the retention factor and the buffer concentration at a fixed modifier content (5% of methanol) could be expressed by following: K = (k(sub)-1 + k(sub)0 (k(sub)B/k(sub)S)/(1 + (k(sub)B/k(sub)S) C(sub)B(sup)a), where C(sub)B was the concentration of buffer. Using this relationship, the calculated values closely matched the experimental data. The derived relationship showed that as the buffer concentration increased, the retention factor approached a certain value, and this was buffer dependent.

• 진공이야기
• /
• 제2권2호
• /
• pp.12-16
• /
• 2015

Organic photovoltaics (OPVs) have attracted significant interest in an interdisciplinary research field for the decades as a next-generation photovoltaic device due to their unique advantages. One of requirements for OPVs having high power conversion efficiency is the favorable energy level alignment between the electrode/organic and organic/organic interfaces to manage the exciton dissociation and improve the charge transport. In this review, strategies to enhance the OPV performance by controlling the energy level alignment are discussed. The insertion of an exciton blocking layer leads to the efficient dissociation of photogenerated excitons at the donor/acceptor interface enhancing the short-circuit current density. The choice of a donor having a high ionization energy and an acceptor having a low electron affinity increases the open-circuit voltage. The insertion of an appropriate work function modifier which reduces the charge injection barrier removes the S-kink in current density-voltage characteristics of OPVs and improves the fill factor. This review would give a valuable guide to design the efficient OPV structure.

• 환경위생공학
• /
• 제16권1호
• /
• pp.91-101
• /
• 2001

In order to propose a optimum method increasing accuracy and reproducibility in analysis of urine lead levels, we compared matrix modifier addition method and microwave digestion method. The results were as follows ; 1. Where the concentration of $Pd(NO_3)_2$(matrix modifier) was $50mg/{\ell}$, and ashing temperature was $900^{\circ}C$, the results were optimum. In case of matrix modifier addition method, the average coefficient of variation (CV) of normal man was 24.1%, and lead worker was 7.9%. The average urine lead levels of standard were $10.42\mu{g}/{\ell}$ and $19.89\mu{g}/{\ell}$ , the accuracies compared to reference values were 97.0% and 92.6%, respectively. 2. Microwave digestion temperature($160~180^{\circ}C$), time(15~25min) and the ratio of urine/ashing acid(1:1~4:1) did not significantly affect lead absorbance and background absorbance. Therefore we set up a optimum analytical conditions as follows: temperature, $160^{\circ}C$; time, 15min; the ratio of urine/ashing acid, 4:1. after samples were digested by the above analytical conditions, lead absorbance and background absorbance was measured at $450^{\circ}C$ as ashing temperature. The average coefficient of variation (CV) of normal man was 12.4%, and lead worker was 6.2%. The average urine lead levels of standard urine were $10.66\mu{g}/{\ell}$ and $23.31\mu{g}/{\ell}$, the accuracies compared to reference values were 99.3% and 103.9%, respectively. From the results, we suggest that microwave digestion method is a more favorable method than matrix modifier addition method because of easiness to reduce organic matter, possibility to analysis at low temperature and accuracy.

• 폴리머
• /
• 제26권2호
• /
• pp.237-244
• /
• 2002

본 논문은 폴리카보네이트 (PC)/폴리부틸렌 테레프탈레이트 (PBT)/충격보강제 (IM) 블렌드에서 PC와 PBT의 조성비에 따른 기계적 성질 및 유동 특성을 조사하였다. 부타디엔계 IM과 부틸아크릴레이트계 IM을 사용하여 각각의 함량에 따른 상온에서의 기계적 물성의 변화와 저온에서의 충격강도를 관찰하였다. 블렌드의 내화학성을 살펴보기 위해 PC/PBT/IM 블렌드를 유기용제인 신너에 침지시킨 후 기계적 물성의 변화를 분석하였다. 블렌드에 PC 함량이 많아질수록 인장 및 굴곡강도가 선형적으로 증가하였고 열변형 온도 역시 증가하였다. 충격강도는 PC의 함량이 약 50 wt% 일 때까지 급격히 증가하며 그 이상의 함량에서는 일정하게 유지되었다. 유동성은 PC함량이 증가할수록 감소하였다. IM의 종류에 따라서 충격특성이 다르게 관찰되었는데, 부틸 아크릴레이트계 IM은 $0^{\circ}C$ 이상의 온도에서 부타디엔계 IM보다 충격강도가 다소 높게 나타났으나 $0^{\circ}C$ 미만에서는 충격강도가 현저하게 낮아졌다. 내화학성 실험에서는 블렌드에서 PC의 함량이 많을수록 인장 및 굴곡강도가 감소하는 반면 충격강도는 증가하였다. 이는 유기용제에 약한 PC가 연화되면서 나타나는 현상이라 사료된다.

• 공업화학
• /
• 제8권3호
• /
• pp.403-409
• /
• 1997

데옥시리보뉴클레오사이드의 평형상수를 단이론과 모멘트방법에 의해서 일정 용매 조성법 역상 고성능 액체크로마토그래피(Reversed-Phase High Performance Liquid Chromatography)를 이용하여 계산하였다. 이동상은 물을 기본으로 유기용매로서 acetonitrile과 methanol을 사용하였다. 단이론은 선형 흡착식으로부터 나온 모델로 일정한 유속으로 용매가 column의 단을 평형을 이루면서 지나간다는 가정 하에서 이루어졌다. 모멘트 방법은 실험결과로부터 얻은 peak에서 첫 번째 절대 모멘트를 구하여 평형상수를 계산하는 방법이다. 이 두가지 방법에 의한 다섯 가지의 데옥시리보뉴클레오사이드의 평형상수값은 서로 근사하였고, 용량인자를 이용하여 구한 평형상수의 값과도 비슷하였다. 평형상수는 이동상에서의 organic modifier의 양의 semi-log의 관계식으로 표리되었고 단이론에 의해 계산된 용출곡선은 실험값과 잘 일치하였다.

• KSBB Journal
• /
• 제14권4호
• /
• pp.490-494
• /
• 1999

보조용매가 포함되지 않은 초임계이산화탄소를 이용하여 추출한 결과 온도 및 압력, 유속 등을 변경시켜도 genistein은 추출되지 않았다. 유기용매로 soaking한 결과를 보면 1mL ethanol로 soaking한 경우, 7.8%의 추출수율을 보였으며 함량도 약 7.8%정도를 나타내었다. Methanol로 soaking한 경우 더 낮은 수율과 함량을 보였다. 보조용매가 포함되지 않은 초임계이산화탄소로 추출한 결과 추출이 되지 않아서 보조용매를 이용하였다. 동일한 온도 압력 하에서 추출한 결과를 보면, ethanol이 methanol보다 효과가 우수하였다. 보조용매를 이용할 때 온도의 영향은 ethanol을 보조 용매로 사용한 경우, 압력 300bar일 때에 75$^{\circ}C$에서 56.4%의 최대수율을 나타내었고 함량은 55$^{\circ}C$일 때가 가장 높았다. 온도 35$^{\circ}C$조건에서 9%의 ethanol을 보조용매로 사용하여 압력의 영향을 조사하였다. 그 결과 300bar에서 genistein은 48.1%의 추출 수율을 얻을 수 있었다. 함량은 200bar일 때가 가장 높았지만 300bar와 비교해서 큰 차이가 없었다. 또한 ethanol을 보조용매로 사용할 때 초임계이산화탄소 유량에 대한 영향은 유량이 증가할수록 추출량도 증가하는 경향을 보였으며 함량도 약간 증가하였다. 온도 35$^{\circ}C$, 압력 275bar에서 ethanol 농도의 영향을 조사하였다. ethanol의 농도가 증가할수록 추출량도 증가하였으나 19%이후부터는 증가율이 둔화되었다. 보조용매를 첨가한 초임계유체를 이용하여 genistein을 추출하였을 때에 ethyl ether를 사용하여 추출했을 때와 비교해서 35$^{\circ}C$, 300bar, 30분간의 추출에서 genistein은 71% 추출수율과 31.5%의 함량을 나타내었다.