• 한국전기전자재료학회논문지
• /
• 제18권6호
• /
• pp.510-514
• /
• 2005

We have investigated the excitation-light source dependence of photo-catalytic efficiency for the benzene removal. The photo-catalytic module for the benzene removal is fabricated by a combination of GaN-based ultraviolet light-emitting diode (UV GaN-LED) and $TiO_2$ thin film coated on an aluminum plate. The benzene reduction rates of 365 nm and 375 nm modules at 60 mA junction current are approximately $8.95\;\%/Hr$ and $9.2\;\%/Hr$, respectively, which indicates that 365 nm GaN-LED is more effective than 375 nm GaN-LED. The benzene reduction efficiency is also noticeably dependent on the excitation wavelength and excitation-light power, as well as it is increased with the shorter wavelength and higher excitation power. This result exhibits that UV GaN-LED is useful to remove the volatile organic compounds (VOCs) existing in the environment.

• 한국산업융합학회 논문집
• /
• 제9권4호
• /
• pp.323-330
• /
• 2006

As the interest in environmental pollution resulting from recent industrial development is converging, wastewater treatment problem of dying processing is one of important pending issue. Usually, flow mediation earth and settling pond etc. of processing plant to handle water or wastewater. Mediation is the wastewater that flowed past settling pond than material of heavy particles, water weight colloid particles that big solids are removed but are suspensibility material settlement exclusion impossible. So, we need flocculation and coagulation action to remove materials from this colloid state. For flocculation and coagulation action chemical agents to add back, addition of chemical agents forms floc of could settle size. That is, shorten the sedimentation time and quality of processing water because promoting sedimentation doing to do fines or suspended solids and colloid can materials large size and also, flocculation to annex efficiency of filtration augment. Therefore, I executed this research to prove that improving organic matter and chromaticity of treated water of processing epochally using organic coagulant informed positive ion co-polymerization superior in color wastewater through this research.

• 전기화학회지
• /
• 제16권3호
• /
• pp.123-128
• /
• 2013

유기물 첨가에 따른 CDI 모듈셀의 N, P 제거 특성을 위해 2000 ppm $NH_3$, $H_3PO_4$에 methanol, ethanol, iso-propanol, methoxy ethanol, glucose을 1, 2, 3 vol.%를 첨가해 용량 및 이온의 흡 탈착능을 관찰하였다. $NH_3$에서는 탄소수가 증가할수록 용량은 감소하는 경향을 나타내었으며, 용량은 methanol 3 vol.% 첨가 될 때 유기탄소 간섭 전보다 흡착은 16.4%, 탈착은 30.4%의 질소 제거율 증가를 나타내었다. $H_3PO_4$에서는 iso-propanol 2 vol.% 첨가 시에 유기탄소 간섭 전보다 흡착은 63%, 탈착은 54.7% 인산염의 제거율 증가를 확인하였다. 따라서 본 연구에서는 폐수 내의 유기물을 제거하지 않고 N, P 제거 효과와 운영비용을 감소할 수 있는 결과를 나타내었다.

• 한국환경보건학회지
• /
• 제26권4호
• /
• pp.129-133
• /
• 2000

The objective of this study was to invetigate the coagulation effects of landfill leachate by using Acid Mine Drainage(AND). The coagulation efficiency was investigated by mixing landfill leachate with F $e^{+3}$ solution earned by oxidation of pyrite(AMD). In the results of this experiment, it was found that the amount of removed COD and SS was approximately 30% respectively by mixing at the ratio of AMD three to leachate one. And it showed highest turbidity removal efficiency at all mixing ratio. Concentration of Fe was decreased with increasing mixing ratio, however it was increased inversely at mixing ratio 4. Optimal mixing ratio was 3 at the results obtained by leachate coagulation experiments. Also removal efficiency at mixing ratio 3 corresponded to 500mg/$\ell$ of FeC $l_3$ dosage. it was suggested that pretreatment by mixing of AMD and leachate remove both suspended organic material of leachate and metal of AMD.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2007년도 추계학술대회 및 제23회 정기총회
• /
• pp.200-201
• /
• 2007

The present study was conducted in three fields at Namhae to examine the removal efficiency of organic free, heavy metal immobilized sediment on Cochlodinium polykrikoidesand and on sea water quality. The present study results concluded that removal efficiency was depends on the initial number of red tide cells. There was no drastic change in the sea water quality after sediment spray. For the comparison of effectiveness of betonite, zeolite and lime were mixed with sediment did not show any marked difference in removal. Finally, the present study evaluated 50g/$m^{2}$ sediment is sufficient to remove 100% cells density, even though various environmental factors are interfering the mechanism.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제16권2호
• /
• pp.52-60
• /
• 2011

Although facilities for the passive treatment of AMD (Acid Mine Drainage) are currently operating in Korea, their removal efficiency for heavy metals is relatively low in average (only 80%). Passive treatment system is composed of oxidation tank, SAPS (Successive Alkalinity Producing System), and wetland. In the treatment system adopted in korea, SAPS (Successive Alkalinity Producing System) plays a major role to remove about 65% of heavy metals through a precipitation. However, the efficiency of SAPS is limited due to the use of mushroom compost (MC) as a organic material and of limestone as a neutralizer. Therefore, this research was performed to search for alternative organic materials through the field test. We tested two types of mixed organic materials: 1) cow manure and spent oak (herein, CO) and 2) cow manure and sawdust (herein, CS). For comparison mushroom compost (herein, MC) was also tested. The result showed that the average Fe removal efficiency was 91.38% with CO, 85.19% with CS, and 91.58% with MC. Thus, CO can be effectively used as an alternative of MC in the SAPS system for heavy metals removal.

• Membrane and Water Treatment
• /
• 제13권2호
• /
• pp.97-104
• /
• 2022

With a small particle size, specific surface area and chemical nature, Pd/Cu-Fe nanocomposites can efficiently remove the organic compounds. In order to understand the applicability for in situ remediation of contaminated groundwater, the degradation of p-nitrophenol by Pd/Cu-Fe nanoparticles was investigated. The degradation results demonstrated that these nanoparticles could effectively degrade p-nitrophenol and near 90% of degradation efficiency was achieved by Pd/Cu-Fe nanocomposites for 120 min treatment. The efficiency of degradation increased significantly when the Pd content increased from 0.05 wt.% and 0.10 wt.% to 0.20 wt.%. Meanwhile, the removal percentage of p-nitrophenol increased from 75.4% and 81.7% to 89.2% within 120 min. Studies on the kinetics of p-nitrophenol that reacts with Pd/Cu-Fe nanocomposites implied that their behaviors followed the pseudo-first-order kinetics. Furthermore, the batch experiment data suggested that some factors, including Pd/Cu-Fe availability, temperature, pH, different ions (SO42-, PO43-, NO3-) and humic acid content in water, also have significant impacts on p-nitrophenol degradation efficiency. The recyclability of the material was evaluated. The results showed that the Pd/Cu-Fe nanoparticles have good recycle performance, and after three cycles, the removal rate of p-nitrophenol is still more than 83%.

• 멤브레인
• /
• 제25권6호
• /
• pp.503-514
• /
• 2015

본 연구는 잔류함으로써 문제를 일으킬 수 있는 응집제를 사용하지 않고 물리적인 처리만을 사용하는 막여과 정수처리의 전처리로 F/A 공정을 구성하고자 하였고 이를 구성하는 여재의 성능을 연구하였다. 특히, 탁질 물질과 유기물 제거가 가능한 것으로 알려진 Filtralite의 도입 가능성을 검토하였다. Filtralite의 탁도 제거효율은 원수대비 83~84%로 여과사와 비슷한 결과 값을 나타내었으며 여재표면에 잘 발달된 공극 때문에 유기물 제거능은 여과사보다 50% 더 높게 나타났다. 따라서 F/A 공정을 구성함에 있어 여과사보다 Filtralite가 더 효율적이라 검토되었다. 활성탄과 연계한 F/A 공정을 구성하여 막여과 처리 시스템의 전처리효율을 실험한 결과, TOC 농도는 TMP의 증가에 큰 영향을 주는 것으로 판단되어 막오염 저감에 유기물 제어가 중요함을 확인하였으며 유기물 제거 효율이 뛰어난 여재 사용이 필요할 것으로 판단되었다.

• 한국가구학회지
• /
• 제23권1호
• /
• pp.26-37
• /
• 2012

This is the study about the New Formation Developement, the Changeable Table Design with Units that made of Wasted Wood to use restricted material rationally and to improve the space efficiency in the Table Design. We made some changeable table design with units that made of laminated wood wasted. And we found out the following formative characteristic and physical merits through this study. First, the space efficiency can be improve technically through the unit combination and organic transfomation of the specific form and a new method by laminated wood make the personal originality and the structral stability be built up. Second, there are some merits, moveable convenience and variable layout by the combination or transformation or personal fondness so that economical efficiency and variable of design can be improved. Third, we can remove original faults inside wood like a knot or not-uniform of wood organ when we laminate wood so that we use proper units that have original beauty of wood and can represent mild mood of furniture wholly. Fourth, much more strengthen tensile strength by the reciprocal action among the units that be made of laminated wood reduces wood's metamorphosis like bending or twisting so that the uniformity of wood can be gain and furniture's metamorphosis can be reduced. According to changes of nature environment, the difficulty of supply and demand for wood may be happen. According to changes of life style these days, supply and demand for environment friendly material, processing technique and developement of design to improve the efficiency of using space must be very important factor in morden furniture design. So we propose changeable furniture design by using new environment friendly meterial and processing method from this study.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1359-1360
• /
• 2006

lTO(Indium-Tin-Oxide) was used as anode material for OLED. Characteristics of ITO have great effect on efficiency of OLEDS(Organic light emitting diodes). ITO surface was treated by Nd:YAG laser in order to improve its chemical properties, wettability, adhesive property and to remove the surface contaminants while maintaining its original function. In this study, main purpose was to improve the efficiency of OLEDs by the ITO surface treatment: ITO surface was treated using a Nd:YAG(${\lambda}=266nm$, pulse) with a fixed power of 0.06[w] and various stage scanning velocities. Surface morphology of the ITO was investigated by AFM. Test OLEDs with surface treated ITO were fabricated by deposition of TPD (HTL), Ald3 (ETL/TML) and Al (cathode) thin films. Device performance of the OLEDs such as V-I-L was investigated using Source Measurement Unit (SMU: Keithly. Model 2400) and Luminance Measurement (TOPCON. BM-8).