• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.93.2-93.2
• /
• 2010

Recently, printing and coating technologies application fields have been expanded to the energy field such as solar cell. One of the main reasons, why many researchers have been interested in printing technology as a manufacturing method, is the reduction of manufacturing cost. In this paper, We fabricated CIGS solar cell thin film layer by doctor blade methods using synthesis of CIS precursor nanoparticles ink on molybdenum (Mo) coated soda-lime glass substrate. Synthesis CIS precursor nanoparticles ink fabrication was mixed Cu, In, Se powder and Ethylenediamine, using microwave and centrifuging. Using multi coating process as we could easily fabrication a fine flatness CIS thin-film layer ($0.7{\sim}1.35{\mu}m$), and reduce a manufacture cost and process steps. Also if we use printing and coating method and solution process in each layer of CIGS solar cell (electrode, buffer), it is possible to fabricate all printed thin-film solar cell.

• Journal of Electrochemical Science and Technology
• /
• 제7권2호
• /
• pp.139-145
• /
• 2016

The electrochemical performance of carbon-coated LiMn₂O₄ nanoparticles was reported. The polydopamine layer was introduced as a new organic carbon source. The carbon layer was homogeneously coated onto the surface of the LiMn₂O₄ nanoparticles because the polymerization process from the dopamine solution (in a buffer solution, pH 8.5) easily and uniformly formed a polydopamine layer. The phase integrity of LiMn₂O₄ deteriorated during the carbon-coating process due to oxygen loss, although the main structure was maintained. The carbon-coated sample led to improved rate capability because of the effect of the conductive carbon layer. Moreover, the carbon coating also enhanced the cyclic performance. This indicates that the carbon layer may suppress unwanted side reactions with the electrolytes and compensate for the low electronic conductivity of the pristine LiMn₂O₄.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.264-267
• /
• 2005

Soft magnetic iron powders have been coated with polyester or phenol resin. And the coated powder (soft magnetic composite) have been pressed into ring type core over the pressure of 870 MPa. Green density, magnetic flux density, permeability, core loss of the samples were measured to look at the effect of the coating materials and the amount of them. Green density is increased with the amount of coating materials and shows the maximum value, 6.5 $g/cm^3$ at 5 w/o, but decreased over it. And lowest value of the core loss is showed for the 5 w/o coated samples.

• 대한금속재료학회지
• /
• 제48권9호
• /
• pp.831-841
• /
• 2010

Indium tin oxide (ITO) nanopowders were synthesized by coprecipitation and the sol-gel method to prepare a stable dispersion of ITO nano-colloid for antistatic coating of a display panel. The colloidal dispersions were prepared by attrition process with a vibratory milling apparatus using a suitable dispersant in organic solvent. The ITO coating solution was spin-coated on a glass panel followed by the deposition of partially hydrolyzed alkyl silicate as an over-coat layer. The double-layered coating films were characterized by measuring the sheet resistance and reflectance spectrum for antistatic and antireflective properties.

• 소성∙가공
• /
• 제28권2호
• /
• pp.71-76
• /
• 2019

Corrosion resistance is one of the essential properties required in steel bolts. The various types of coatings are used to improve the corrosion resistance of steel bolts. But, roll formed, subsequently Zn alloy electrodeposited and top coated steel bolt easily takes place the white storage stain or white rust under high humidity condition. To investigate the corrosion resistance of roll formed and subsequently the various types of coated steel bolts, their polarization curves were measured by potentio-dynamic tester in this study. Based on the measured polarization curves, the more times of chromate and top coating on roll formed steel bolt, the higher corrosion resistance was shown. The roll formed steel bolt, which was Zn-Ni electro-deposited, two times chromated, one time inorganic top coated, one time organic top coated and annealed, showed the best corrosion resistance.

• 한국진공학회지
• /
• 제13권3호
• /
• pp.99-102
• /
• 2004

유기 절연층을 사용한 유기 박막 트랜지스터의 특성 향상을 위해 절연층 표면에 Ar플라즈마 처리를 하였다. 플라즈마 처리는 절연체 표면의 화학적, 물리적 특성 변화를 통해 그 후에 이어지는 활성층 성막시 분자들의 결정성을 향상시키기 위한 방법이다. 활성층으로 사용된 물질은 pentacene이며, 절연층으로 사용된 물질은 PVP(poly-vinyl-phenol)이다. Pentacene는 약 $10^{-6}$ Torr에서 0.5 $\AA$/sec의 속도로, PVP는 spin coating법에 의해 각각 성막되었다. 형성된 절연층을 일정 시간동안 H플라즈마 처리 한 후 각 소자의 전기적 특성을 측정하여 표면처리에 의한 특성 변화를 살펴보았다.

• 한국건축시공학회지
• /
• 제17권2호
• /
• pp.157-166
• /
• 2017

일반적으로 크리트 구조물의 열화를 발생하는 가장 중요한 원인은 탄산화와 염소이온이다. 대체적으로 많은 콘크리트 구조물에서 탄산화와 염소이온으로 인하여 철근이 부식되며 이에 대한 많은 연구가 이루어지고 있다. 특히, 최근에는 보수용으로서 콘크리트 보호용 표면피복재에 방청제를 함침시켜, 염화물을 포함하고 있는 콘크리트 내 철근의 부식을 억제하는 공법도 개발되어지고 있다. 이에, 본 연구에서는 기존 보수재료 보다 부식 억제가 우수하고 열화원인인 $CO_2$ 와 $Cl^-$를 고정하는 유기계방청제를 혼입한 표면피복재의 특성 평가를 위해 촉진탄산화 및 시차 열 중량분석(TG-DTA), CASS시험를 실시하여 특성을 실험적으로 평가하였다. 실험 결과, TG-DTA 분석과 촉진탄산화를 통하여 유기계방청제 혼입으로 시멘트 콘크리트에 $CO_2$가 아민유도체와 직접적으로 반응하여 탈 양성자화 되면서 산성상태의 물질을 생성하여 안정화된 상태, 즉 $CO_2$가 고정화되어 탄산화 억제효과가 있음을 확인 하였다. 또한, CASS실험에서도, $Cl^-$ 고정 특성이 있는 유기계 방청제가 혼입된 표면피복재를 도포한 시험체의 경우, 28일째까지도 적청 발생이 관찰되지 않았으며 염화물에 의한 철근 부식을 방지하는데 우수한 성능으로 가지고 있음을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.328-329
• /
• 2009

This paper presents the effect of organic Ag complex sintering temperature on the MEH-PPV photoluminescence (PL) properties. MEH-PPV and organic Ag complex was coated on the glass substrate by spin coating method. The coated Ag complex was sintered in an air atmosphere. The sintering temperature was varied from 100 to $200^{\circ}C$ and sintering time was 5 min. The Ag film sintered at temperature higher than $120^{\circ}C$ shows very low sheet resistance less than $0.5\;{\Omega}{/\square}$. The coated MEH-PPV measure photoluminescence (PL) intensity at 580 nm. The PL peak was shifted to the higher wavelength with increasing the sintering temperature.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.315-315
• /
• 2006

A variable surface coating with the potential to fulfill the requirements of industry will be presented. Via controlled radical polymerization methods from a functionalized Polymethylsilsesquioxane delivers an inorganic-organic block copolymer, which can be easily modified and tuned for different applications. Spin coated or dip coated on various substrates show promising results. By using different block copolymers the contact angle on a silicon wafer can be varied in a range of $90^{\circ}\;up\;to\;145^{\circ}$ After curing and complete condensation a perfect adhesion on glasses, plastics and metals is achieved.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.417-419
• /
• 1995

Polymer-coated piezoelectric crystals were applied to analyze response characteristic of organic gases. AT-cut quartz crystal with 9 MHz resonant frequency can measure mass of 1 nanogram. Flow type gas-sensing system was used in this experiment. Flow type gas-sensing system has very simple apparatus and shows very fast frequency response for injection of organic gas. We have made parameter using relaxation ratio of frequency response for organic gas. Consequently, we found that the parameter had no relation with quantity of gas injection and dipping.