• 환경위생공학
• /
• 제18권4호
• /
• pp.36-44
• /
• 2003

The cement-based system among S/S(Solidification/Stabilization) is widely used to treat hazardous wastes. In this study, tannery sludge was solidified to evaluate the stabilization effects of using admixtures in the cement-based S/S. Fly ash as substitute also used to increase the strength of the S/S of hazardous waste. The compressive strength measurement and leaching experiment of chromium metal of solidified mortar were carried out to compare and evaluate the physical and chemical characteristics of solidified hazardous waste sludge. From the result of this study, there was increased of compressive strength by using AEW-3(early-hardening AE water reducing agent), and leaching concentration of chromium became low enough to satisfy the regulatory criteria. The successful solidification for the organic contaminant and heavy metal in hazardous waste should enable to treat by cement-based system using early-hardening AE water reducing admixture and fly ash as substituted cement.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.415-418
• /
• 2005

Nowadays the three major commercially available of organic chemical admixtures are modified lignosulfonates(LS), sulfonated naphthalene-formaldehyde resins (SNF) and sulfonated melamine-formaldehye (SMF). In this study, various sulfonated melamine-formaldehyde (SMF) superplasticizers were synthesized via four synthetic steps. Hydroxymethylation (Step 1), Sulfonation (Step 2), Polymerization (Step 3) and Neutralization and Stabilization (Step 4). In this synthesis of SMF, reaction conditions such as the mole ratio of melamine to formaldehyde and the amount of acid catalyst were changed. After application of SMF superplasticizer to cement paste and mortar, the physical properties including workability, slump loss, compressive strength were compared.

• 콘크리트학회논문집
• /
• 제17권5호
• /
• pp.811-818
• /
• 2005

플래쉬 콘크리트의 유동성 및 유동성 감소는 유기 화학혼화제의 종류에 영향을 받는다는 것은 잘 알려져 있다. 유기화학 혼화제는 콘크리트의 물성을 증가시킬 수 있다. 술포네이트 나프탈렌 포름알데하이드(SNF, Sulfonated Naphthalene-Formaldehyde) 고유동화제(superplasticizer)가 대표적으로 많이 사용되고 있으나, 유동성 감소의 문제점이 있다. 본 연구에서는 술포네이트 멜라민 포름알데하이드(SFM, Sulfonated Melamine-Formaldehyde) 고유동화제를 합성하여 SNF 고유동화제의 물리적 특성을 보완하고자 한다. SNF계 고유동화제를 4단계로 나누어 반응을 진행하였고, Step.1은 hyydroxymethylation 단계이고, Step.2는 sulfonation단계이고, Step.3은 중합단계이고, Step.4는 안정화 단계이다. SMF 고유동화제의 합성은 pH, 반응온도 및 반응시간에 영향을 받는다 본 합성에서 우리는 멜라민과 포름알데하이드의 몰비를 1:3, 1:4로 변화시키고, Step. 3에서 촉매의 양을 조절하면서 반응을 진행하였다. 그리고, SMF 고유동화제 및 SNF계 고유동화제와 혼합한 시료에 대해서 시멘트 대비 0.5, 1.0, 1.5wt% 첨가하여 물리적 특성을 비교하였다. 고유동화제를 첨가한 시료는 첨가하지 않은 시료 CEM보다 높은 압축강도, 슬럼프 값을 나타내었고, 미세한 기공과 낮은 기공율을 보였다.

• 한국건축시공학회지
• /
• 제10권5호
• /
• pp.95-102
• /
• 2010

최근 들어 경제성장과 산업기반 시설의 확충 등으로 인하여 타사의 레미콘을 종종 혼용 하는 경우가 있는데, 사용되는 혼화재료의 경우 제조회사별로 화학성분 및 첨가량의 차이가 있으므로 서로 다른 레미콘 제조회사의 콘크리트가 혼합되었을 시에 강도 저하 및 응결지연, 내구성 저하 등으로 인한 콘크리트의 성능 저하요인이 발생된다. 혼화제 종류별로 제조된 콘크리트의 재 혼합 타설시의 성능 분석을 한 결과로서 먼저 슬럼프는 모든 콘크리트에서 목표슬럼프 값을 만족하였으며, 공기량 역시 모든 콘크리트에서 목표 공기량을 만족 하였다. 블리딩량 및 블리딩률의 경우 전반적으로 유기산계와 같이 혼합된 콘크리트에서 높은 블리딩량을 나타내었다. 조기재령의 압축강도는 Plain의 나프탈린계에서 가장 큰 강도발현 경향을 나타내었고, 재 혼합 콘크리트에서는 5:5의 유기산계와 나프탈린계에서 가장 큰 압축 강도 발현 경향을 나타내었다. 표준재령의 경우 5:5의 재 혼합 콘크리트 중 나프탈린계+리그닌계를 혼합하였을 때 가장 큰 강도 발현 경향을 나타내었다. 인장강도 역시 압축강도와 유사한 경향을 나타내었다. 길이변화율은 전반적으로 Plain에 비하여 큰 건조수축 경향을 나타내었으며, 재 혼합콘크리트 7:3의 경우에 가장 큰 건조수축경향을 나타내었다. SEM사진 분석결과 재혼합 콘크리트에서 더 많은 미세공극들이 발견되었다. 결과적으로 한 종류의 레미콘을 이용하여 타설하였을 경우 보다 혼합사용 하였을 경우 응결지연 및 초기강도 저하현상이 나타나고, 더 큰 건조 수축 경향을 나타내어 일부 혼화제를 선별하여 혼합 사용하는 경우를 제외하고는 가능한 동일한 혼화제를 사용해야 할 것으로 판단된다.

• 한국세라믹학회지
• /
• 제52권6호
• /
• pp.479-482
• /
• 2015

The flue gas desulfurization (FGD) process is one of the most effective methods to reduce the amount of $SO_2$ gas (up to 90%) generated by the use of fossil fuel. Limestone is usually used as a desulfurizing agent in the wet-type FGD process; however, the limestone reserves of domestic mines have become exhausted. In this study, limestone sludge produced from the steel works process is used as a desulfurizing agent. Seven different types of additives are also used to improve the efficiency of the desulfurization process. As a result, alkaline additive is identified as the least effective additive, while certain types of organic acids show higher efficiency. It is also observed that the amount of FGD gypsum, which is a by-product of the FGD process, increases with the used of some of those additives.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.542-547
• /
• 2000

It has become interested in the concept of permeable barriers for the containment and/or destruction of contaminated groundwater. The purpose of these trench-like barriers is to provide in situ capture and possibly destruction of the contaminant while preserving groundwater flow to uncontaminated zones. For instance, a trichloreethylene(TCE) plume may be contained by a permeable in which reactive iron reduces TCE to ethylene and ethane, compounds which can be easily biodegraded. The objective of this research is to examine the feasibility of using zero-valent iron as a clean-up media in permeable reactive barrier system. A series of laboratory column tests are performed. The concentration of influent and effluent water and the rate of clean up are analysed from these test results. The experimental result shows that the majority of the contamination in groundwater is removed in the reactor. And it shows the corresponding increase in the concentration of chloride ions through the reactor. Results from this study indicate that permeable reactive barrier containing admixtures of zero-valent iron and other materials can effectively clean up groundwater contaminated with organic compounds.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.631-637
• /
• 1999

Effect of excessive addition of water reducing agent was examined by concrete tests. Water reducing agents of lignin or naphtalene base were used in the experiment. Setting of concrete was retarded according to the increase of dosage of water reducing agent and was extremely delayed at the 3 times or more use of lignin base agent and near 5 times or more use of naphtalene base agent respectively. When water reducing agent was used more than 6 times of standard dosage, early strength of concrete was very low and the strength reduction was very severe at all test ages in the concrete using lignin base agent.

• 한국세라믹학회지
• /
• 제31권10호
• /
• pp.1107-1114
• /
• 1994

Although various theories have been presented on the mechanism of setting retardation of plaster in addition to organic admixtures. The purpose of this paper is that Hydration studies of plaster of paris in the presence of carboxylic acids under alkalinity are examined in the coordination chemistry. Setting of plaster of paris is retarded by the addition of carboxylic acids except oxalic acid. And setting of plaster of paris contained 5 wt% of Ca(OH)2 is also retarded by the addition of above-mentioned carboxylic acids. The degree of retarding effect under alkalinity is found to be a function of the number of the functional group and the length of carbon chain of carboxyl acids. These reasons are attributed to the soluble complex formation, that is calcium complex formation between calcium ion and carboxylic acids. The author's proposal was confirmed by the results of electrical conductivity measurement. The formation of calcium complex was surpported by IR spectra.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.457-460
• /
• 2008

최근의 콘크리트 기술은 시멘트 제조기술의 발전 보다는 화학 혼화제의 기술발전에 의하여 성장하였다. 현재, 콘크리트 산업에 주로 사용되고 있는 4가지 화학 혼화제로서 변형된 리그닌(LS), 나프탈렌계(SNF), 멜라민계(SMF) 및 폴리카르복실레이트계(PC)계가 있다. 본 연구에서는 SMF계 고유동화제를 멜라민과 포르말린의 몰비를 변화 시키며 4단계로 나누어 반응을 진행시켰다. 합성된 SMF계 고유동화제를 시멘트 콘크리트에 적용하여 작업성, 슬럼프 손실 및 압축강도를 SNF와 비교하였다.

• 자원환경지질
• /
• 제38권6호
• /
• pp.657-662
• /
• 2005

Extractions fro fertilizer and soil samples were performed to yield the operationally defined fractions 'soluble' chromate (extractable with $NH_4NO_3$), 'exchangeable' chromate (extractable with phosphate buffer pH 7.2), and these results were compared with the data obtained by extractions with ammonium sulfate, borate buffer pH 7.2, saturated borax pH 9.6, and polyphosphate (Graham's salt). In order to maintain the pH of extractant solution about constant, the concentration of extractant buffer had to be raised to at least 0.5 M. The results strongly depended on the kind of extractant, and the solid: liquid ratio. For most of the samples investigated, the extraction efficiency increased in the order borate-sulfate-nitrate-phosphate. Whereas the recovery of $K_2CrO_4\;and\;CaCrO_4$ added to the samples of basic slags prior to the extraction was about complete, the recovery of added $PbCrO_4$ was highly variable. In soil extracts, the color reaction was interfered from co-extracted humics, which react with the chromate in weak acid solution during the time period necessary for color reaction (1 hour). However, this problem can be overcome by standard addition and subtraction of the color of the extractant solution. In soil extract of about pH < 7, organic material reduced chromate during the extraction period also, and standard addition of soluble chromate is recommended to prove recovery and the stability of chromate in the samples. In admixtures of soils and basic slags, results for hexavalent chromium were lower than from the mere basic slags. This effect was more pronounced in phosphate than in nitrate extracts. As a proficiency test, samples low in organic carbon from contaminated sites in Hungary were tested. The results from $NH_4NO_3$ extracts satisfactorily matched the results of the Hungarian labs obtained from $CalCl_2$ extractants.