• Journal of Information Processing Systems
• /
• v.15 no.2
• /
• pp.386-398
• /
• 2019

The transmission capacity of transmission lines is affected by environmental parameters such as ambient temperature, wind speed, wind direction and so on. The environmental parameters can be measured by the installed measuring devices. However, it is impossible to install the environmental measuring devices throughout the line, especially considering economic cost of power grid. Taking into account the limited number of measuring devices and the distribution characteristics of environment parameters and transmission lines, this paper first studies the environmental parameter estimating method of inverse distance weighted interpolation and ordinary Kriging interpolation. Dynamic thermal rating of transmission lines based on IEEE standard and CIGRE standard thermal equivalent equation is researched and the key parameters that affect the load capacity of overhead lines is identified. Finally, the distributed thermal rating of transmission line is realized by using the data obtained from China meteorological data network. The cost of the environmental measurement device is reduced, and the accuracy of dynamic rating is improved.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.6
• /
• pp.303-309
• /
• 2013

For air-tight modern buildings, secondary damage is likely to occur due to condensation in the relatively high heat-transmission windows since water vapor is not easy to discharge. Therefore, in this study, condensation performance of vacuum glazing was numerically analysed, compared with that of ordinary glass and confirmed experimentally by three sheets of vacuum glazing manufactured. The results show that the heat transmission coefficient of the vacuum glazing whose internal pressure is $10^{-3}$ torr was as low as about $5.7W/m^2{\cdot}K$. Thus, the condensation performance as well as the adiabatic performance was greatly improved compared to that of the ordinary glass.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.145-149
• /
• 2001

In this study, an acoustical characteristics of sound proof panel for high speed train was performed. A sound absorption coefficient and transmission loss of sound proof panels for high speed train were tested in reverberation chambers and compared those of ordinary sound proof panel. The effect of noise barrier was simulated by using ray noise program with measured sound absorption coefficient for high speed train case and for ordinary case.

• Journal of Adhesion and Interface
• /
• v.14 no.2
• /
• pp.57-67
• /
• 2013

The incompletion of TIR (Total Internal Reflection) in FTIR (Frustrated Total Internal Reflection) touch screen has been investigated as follows. Assuming a 3 layer thin film of medium1 ($n_1$)-medium2 ($n_2$)-medium3 ($n_3$) with refraction indices of $n_1=n_3{\neq}n_2$, it was theoretically proven that FTIR or OT (ordinary transmission) phenomena might happen through medium2 from medium1 to medium3 relying on relative difference in $n_1(=n_3)$ and $n_2$, and that the formulae for FTIR and OT could be transformed into each other depending on the number state (imaginary or real) of the light wave phase. In parallel to the theoretical analysis, the incompletion of TIR in acrylate due to external contacts was also elucidated from the experimental and phenomenological viewpoints. On the basis of this considerate work, we explained how to improve the touching performance for better FTIR touch screen.

• ETRI Journal
• /
• v.31 no.1
• /
• pp.42-50
• /
• 2009

A new method for simulating voltage and current distributions in transmission lines is described. It gives the time domain solution of the terminal voltage and current as well as their line distributions. This is achieved by treating voltage and current distributions as distributed state variables (DSVs) and turning the transmission line equation into an ordinary differential equation. Thus the transmission line is treated like other lumped dynamic components, such as capacitors. Using backward differentiation formulae for time discretization, the DSV transmission line component is converted to a simple time domain companion model, from which its local truncation error can be derived. As the voltage and current distributions get more complicated with time, a new piecewise exponential with controllable accuracy is invented. A segmentation algorithm is also devised so that the line is dynamically bisected to guarantee that the total piecewise exponential error is a small fraction of the local truncation error. Using this approach, the user can see the line voltage and current at any point and time freely without explicitly segmenting the line before starting the simulation.

• Journal of the Korean Institute of Educational Facilities
• /
• v.11 no.1
• /
• pp.5-14
• /
• 2004

Since 1990s in Korea, elementary school classrooms have been designed toward open education system in pursuit of variety of educational purpose. Also, the architectural designs of schools have been acomplished for individual school not based on the standard design code. The present paper aims to investigate the acoustic environment of existing classrooms and to compare the sound insulation capacity between the ordinary classrooms and the newly built classrooms for open education. The current acoustical situation of elementary classrooms was analyzed using field measurements and questionnaire survey. In order to this, Three elementary schools were selected which were built in 1978, 1996 and 2000 respectively. Room acoustical parameters including Reverberation time(RT), Definition(D50), Speech Intelligibility(RASTI), Transmission loss(TL) and STC were measured in a classroom in each elementary school classroom. Each measurement was undertaken with the windows and doors being open or closed. As the result, it was found that the transmission loss between rooms in open classrooms is, $5{\sim}6dB$ in average, inferior than the ordinary classrooms. The RASTI of 0.70 was measured in newly built classrooms which is better than old classrooms(0.70) and open classrooms(0.73). This was shown as same in the speech definition measurements. This results from the condition of sealing and airtightness of classrooms and floor materials. The results denote that open classrooms have poor acoustic condition in sound insulation and speech intelligibility.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.12
• /
• pp.119-126
• /
• 2004

Permanent magnetic gears are magneto-mechanical devices that are widely used to replace the ordinary mechanical gear and to transmit torque without the mechanical contact. This study investigates the characteristics of touch free permanent magnetic gear according to the employing systems. The effect of the magnetic torque is analyzed by using 3 dimensional Finite Element Method (FEM). To estimate the transmission torque of FEM model, the numerical results are compared with the experimental results. The influences of geometry size, magnet number on transmission torque are obtained. As results of this paper, it is confirmed that the transmission torque behavior is associated with the configuration of the magnet numbers and the air gap between the two permanent magnetic gears.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.6
• /
• pp.49-58
• /
• 1993

Extended reduced difference pyramid (ERDP) is proposed for lossless progressive image transmission, which is based on a new transform called rounded-transform(RT). The RT is a nonlinear and reversible transform of integers into integers utilizing two kinds of the rounding operations such as round up and down. The ERDP can be obtained from an N-poing RT or a series of RTs of both. For the performance evaluation, the entropy of the difference images to be transmitted is used as a lower bound transmission rate. Two examples of the ERDP can be easily shown, which is more effective in the entropy than the ordinary RDP.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.1
• /
• pp.322-340
• /
• 2012

Orthogonal Frequency Division Multiplexing (OFDM) is usually regarded as a spectral efficient multicarrier modulation technique, yet it suffers from a high peak-to-average power ratio (PAPR) problem. Among all the existing PAPR reduction techniques in OFDM systems, side information based PAPR reduction techniques such as partial transmit sequence (PTS) and selective mapping (SLM) schemes, have attracted the most attention. However, the transmission of side information results in somewhat spectral loss and this does not significantly improve the bit error rate (BER) performance. Parallel combinatory (PC) OFDM yields higher spectral efficiency (SE) and better BER performance on Gaussian channels,while is a little but not obvious PAPR improvement over the ordinary OFDM system. This investigation aimed to design a 'perfect' OFDM system. We introduce the side information to rotate the subcarrier phases of our novel PC-OFDM system structure, and call this new system the SIPC(Side information based Parallel Combinatory)-OFDM system. The proposed system achieves better PAPR and SE performance. In addition, considering the tradeoff of system parameters, the proposed system also has the properties of a higher BER.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.1037-1040
• /
• 1999

In this paper, we designed the extended ATA(AT Attachment interface with extension) interface that combines with goods price and ability and intellectual behavior of SCSI, for make progress the ability and structure of ordinary interface for connect with device of using PC. ATA is establish a standard of IDE(Intelligent Drive Electronics) public in small form factor. SCSI bus is device behaving intellectual and have stable hardware structure, calssified instructions structure. But it is device that difficult to buy, because of price of more than two times. The other side, ATA device is worse than SCSI bus in part of ability, but it came to SCSI in part of speed after improve and it's price is less expensive. another improvement of ATA is a standard of ARAP(AT Attachment Packet Interface) and use method of packet transmission and behaves as if SCSI use a method. Finally, improvement of ATAPI behave from interface of only HDD to ability of ordinary interface. This paper propose the structure of extended interface that satisfied the price and ability.