• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.368-370
• /
• 2007

AAO(Anodic Aluminum Oxidation) method has been known that it is practically useful for the fabrication of nano-structures and makes it possible to fabricate the highly ordered nano masters on large surface and even on the 2.5 or 3D surface at low cost comparing to the expensive e-beam lithography or the conventional silicon processing. In this study, by using the multi-step anodizing and etching processes, highly ordered nano patterned master with concave shapes was fabricated. By varying the processing parameters, such as initial matter and chemical conditions; electrical and thermal conditions; time scheduling; and so on, the size and the pitch of the nano pattern can be controlled. Consequently, various alumina/aluminum nano structures can be easily available in any size and shape by optimized anodic oxidation in various aqueous acids. The resulting good filled uniform nano molded structure through hot embossing molding process shows the validity of the fabricated nano pattern masters.

• Transactions on Electrical and Electronic Materials
• /
• 제11권3호
• /
• pp.112-115
• /
• 2010

This paper provides the properties of $TiO_2$ nanotube arrays which are fabricated by anodic oxidation of Ti metal. Highly ordered $TiO_2$ nanotube arrays could be obtained by anodic oxidation of Ti foil in $0.3\;wt{\cdot}%$ $NH_4F$ contained ethylene glycol solution at $30^{\circ}C$. The length, pore size, wall thickness, tube diameter etc. of $TiO_2$ nanotube arrays were analyzed by field emission scanning electron microscopy. Their crystal properties were studied by field emission transmission electron microscopy and X-ray photoelectron spectroscopy.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.144-148
• /
• 1999

The relationship between oxidation and sliding wear behavior of Fe-28 at%. Al alloys with B2 ordered structure has been investigated. Sliding wear tests of the alloys have been carried out under various environmental conditions using a pin-on-disk wear tester. The wear rate of the ordered alloys in an oxygen atmoshpere was found to be much lower than in an oxygen atmosphere showed that Fe2O oxides formed on the wearing surface. The oxide layer prevented direct contact of the two mating materials and therefore improved wear resistance of the Fe-Al intermetallic alloy. It was found that the surface Al2O3 oxide layer which provides good oxidation resistance and improved mechanical properties broke down easily and didnot function properly as an oxidation barrier.

• Bulletin of the Korean Chemical Society
• /
• 제31권4호
• /
• pp.1041-1042
• /
• 2010

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 ISIS 2003
• /
• pp.395-398
• /
• 2003

Two component analysis methods based on the fuzzy relational calculus are proposed in the setting of the ordered structure. First component analysis is based on a decomposition of fuzzy relation into fuzzy bases, using gradient method. Second one is a component analysis based on the eigen fuzzy sets of fuzzy relation. Through experiments using the test images extracted from SIDBA and View Sphere Database, the effectiveness of the proposed component analysis methods is confirmed. Furthermore, improvements of the image compression/reconstruction and image retrieval based on ordered structure are also indicated.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.385-385
• /
• 2011

Ion beam Sputtering (IBS)를 이용한 물질 표면의 pattern 형성은 물리적 변수 조절로 손쉽게 nano structure의 크기와 형태를 조절할 수 있어 관심을 받고 있다. 본 연구발표에서는 massless Dirac Fermion behavior로 인한 highly carrier mobility와 같은 특성으로 인해 차세대 device material로 각광받고 있는 Graphene의 layered compound (층상구조) 형태인 HOPG (Highly Ordered Pyrolysis Graphite)에 IBS (Ion beam Sputtering)를 이용해 nano structure가 형성 가능함을 보이고 그 특징에 대해 소개하려 한다. HOPG(0001)를 Sputter 했을 때, 표면에 잘 정렬된 nano ripple pattern이 형성 가능함을 확인하였으며 sputter하는 시간을 변화하면 약 10 nm에서 80 nm까지 wavelength를 조절할 수 있다. 또한 이전의 IBS를 이용한 연구들에서 확인할 수 있는 다른 물질의 곧게 뻗은 nano ripple과는 다르게 ripple의 끝에 nano swab이 생기는 것을 AFM (Atomic Force Microscope)으로 확인할 수 있었다. 이러한 Graphite에서만 나타나는 Sputter에 의한 표면의 변화의 원인을 규명하고자 Sputter가 지속됨에 따라 나타나는 mopology의 roughness와 wavelength의 시간에 따른 dynamic scaling behavior를 확인하였고 그 얼개를 알기 위해 simulation을 수행 하였다.

• Bulletin of the Korean Chemical Society
• /
• 제32권1호
• /
• pp.186-190
• /
• 2011

Periodically ordered mesoporous manganese oxides were synthesized in a single and double replication procedure. Mesoporous SBA-15 and -16 silica and their reverse replica carbons were successively used as hard templates. The silica and carbon pore systems were infiltrated with $Mn(NO_3)_2{\cdot}xH_2O$ or $Mn(AcAc)_2$, which was then converted to $Mn_2O_3$ at 873 K; the silica and carbon matrix were finally removed by NaOH solution or calcinations in air. The structure of the mesoporous $Mn_2O_3$, using a carbon template, corresponds to that of the original SBA-15 and SBA-16 silica. The products consist of hexagonally arranged cylindrical mesopores with crystalline pore walls or cubic mesoporous pores. The structure of replica has been confirmed by XRD, TEM analysis, and its electrochemical properties were tested with cyclic voltammetry. Formation of $Mn_2O_3$ inside the mesoporous carbon pore system showed much improved electrical properties.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.303-304
• /
• 2007

A comparison study of carbon coating on $LiFePO_4$ was done with two different carbon sources-petroleum pitch and Ketjen black. Raman spectroscopy and transmission electron microscopy (TEM) analysis were applied to the carbon-coated $LiFePO_4$. $LiFePO_4$ which was carbon-coated with petroleum pitch showed more uniform carbon layer and ordered carbon structure. Such uniformity and ordered structure of carbon coating layer resulted in higher initial discharge capacity and better rate capability.

• Bulletin of the Korean Chemical Society
• /
• 제18권1호
• /
• pp.91-97
• /
• 1997

In the course of magnetic study on several perovskite-type oxides, A2Fe(Ⅲ)BO6 (A = Ca, Sr, Ba and B = Sb, Bi), we have observed a strong irreversibility in their dc-magnetizations. When the structural data and the Mossbauer spectra are considered, such an irreversibility is to be associated with some competitions between the nearest-neighbors (nn) and the next-nearest-neighbors (nnn) in their magnetic sublattices. Particularly, the Mossbauer spectra indicate that Sr2FeBiO6 of cubic perovskite-structure is apparently well ordered crystalline compound. Nontheless this antiferromagnet shows a magnetic property which resembles that of a spin-glass. The strong history dependence is observed below 91 K and the irreversible magnetic behavior is also observed from the measurement of hysteresis loops at 10 K after zero-field-cooled (zfc) and field-cooled (fc) processes. Considering the nn and the nnn superexchanges of almost same order in ordered perovskite, it is proposed that there exists a competition and cancellation of antiferromagnetic and ferromagnetic superexchange between the nearest-neighbors and the next-nearest-neighbors, thus introducing a certain degree of frustration.

• Bulletin of the Korean Chemical Society
• /
• 제22권3호
• /
• pp.267-270
• /
• 2001

The adsorption of chlorine on a Pt(111) surface at 90 K has been studied using scanning tunneling microscopy (STM) in ultra-high vacuum environments. The adsorbed chlorine atoms give rise to two different ordered structures, (3${\times}$3)-Cl and c(4${\times}$2)- Cl, depending on the coverage. It has been determined from the STM image that the absolute coverage of (3${\times}$3)-Cl structure is 0.44, which is not in agreement with coverage calibrated by a low energy electron diffraction technique together with an Auger electron spectrometer and a thermal desorption spectrometer. The Cl atoms bound to on-top sites at the Pt(111)(3${\times}$3)-Cl surface appeared to effectively perturb the density of states of Pt atoms, as compared with that bound to bridging sites. The other ordered structure, c(4${\times}$2)-Cl, with small domain sizes, consists of both on-top and bridge-bonded species with a saturation coverage of 0.5.