• Ocean Systems Engineering
• /
• v.7 no.1
• /
• pp.53-74
• /
• 2017

Ship shaped FPSO (Floating Production, Storage and Offloading) units are the most commonly used floating production units to extract hydrocarbons from reservoirs under the seabed. These structures are usually much larger than general cargo ships and have their natural frequency outside the wave frequency range. This results in the response to first order wave forces acting on the hull to be negligible. However, second order difference frequency forces start to significantly impact the motions of the structure. When the difference frequency between wave components matches the roll natural frequency, the structure experiences a significant roll motion which is also termed as second order roll. This paper describes the theory and numerical implementation behind the calculation of second order forces and motions of any general floating structure subjected to waves. The numerical implementation is validated in zero speed case against the commercial code OrcaFlex. The paper also describes in detail the popular approximations used to simplify the computation of second order forces and provides a discussion on the limitations of each approximation.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.856-859
• /
• 2002

This paper proposes a high-performance VLSl architecture using distributed arithmetic for higher-order FIR filters with complex coefficients. For the purpose of realizing high sampling rate with small latency in high-order filters, we apply distributed arithmetic[1］. Moreover, in order to decrease drastically the power dissipation, the structure applying not ROM's but optimum function circuits which we have previously proposed, is utilized［2]［3］. However, this structure increases in the number of adders as compared to the conventional structure applying ROM's. In order to realize a more effective method for further higher-order filter, we propose newly an implementation applying two methods which have large effects on the unit using the adders. First , we propose an implementation applying SFAs(Serial Full Adders) and SFSs(Serial Full Subtractors). Second, we propose a structure applying proposed 4-2 adders. Finally, it is shown that the proposed architecture is an effective way to realize low power dissipation and small latency while the sampling rate is kept constant for further higher-order filters with complex coefficients.

• Korea Journal of Hospital Management
• /
• v.11 no.2
• /
• pp.61-86
• /
• 2006

Based on a previous literature about hospital capital structure(Shyam- Sunder & Myers, 1999), this study attempted comparison and analysis on whether the forecast of trade-off and pecking order theory could be validated in hospital's capital structure. First, this study analyzed whether hospitals follow the priority for each capital source as suggested by pecking order theory under lack of capital running in hospital. Next, it analyzed whether debt level is regressed on the average to target debt level so as to verify the validity of trade-off theory. Finally, it also analyzed possible associations between debt level and determinants of capital structure as adopted in static trade-off theory, so as to verify relative advantages of these two theories about hospital capital structure. The analysis over whole period showed that both trade-off theory and pecking order theory isn't supported particularly. This mean that each hospital's financing behaviors is different and that has not dominant financing behaviors. In the midst of separation of dispensary from medical practice, medical institutions in Korea first finances funds required using retained earnings and then use liabilities. however pecking order theory is supported, the preference of long-term liabilities and short-term liabilities is not clear. In addition, considering that debt level is in no average regression to target debt ratio, it is found that hospital capital structure following trade-off theory turns into that subject to pecking order theory via the separation of dispensary from medical practice.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.253-256
• /
• 1996

In this paper, A new time-varying sliding surface design using eigenvalue locus is proposed to achieve fast and robust in a class of high-order uncertain dynamic system. A moving sliding surface(MSS) was proposed earlier for the second-order variable structure control systems(VSCS). This methodology led to fast and robust control responses of the second-order VSCS. However, the moving algorithm of the MSS was too complicated to be employed the high-order VSCS. To resolve this problem, we propose a new moving algorithm that switching surface moves such that the eigenvalues of equivalent system in the sliding mode have a predetermined locus. Using the proposed surface fast and robust behaviors are accomplished. The problem of chattering can be eliminated by using a boundary layer of switching surface. The efficiency of proposed algorithm is illustrated by an application to four-order workbench.

• Journal of Sasang Constitutional Medicine
• /
• v.19 no.3
• /
• pp.1-9
• /
• 2007

1. Objectives This Study is to comprehend the Sasang structure created by Lee Je-Ma. 2. Methods We analyzed $\ulcorner$Dongyisusebowon(東醫壽世保元)$\lrcorner$ & $\ulcorner$Gyukchigo(格致藁)$\lrcorner$ which contain the contents of 'Heaven-Human-Narure-Order(天人性命), and 'Affairs-Mind-Body-Objects(事心身物)'. 3. Results and Conclusions 1) The structure of Sasang is divided into two, which are 'Talent(才能的 部分)-Action(行爲的 部分)' and 'Self examination(正己的 部分)-Perception of mankind(知人的 部分)'. 2) 'Talent-Action' is the ontological structure of the Sasang. 'Self examination-Perception of mankind' is the administrative structure of the Sasang. 3) The ontological structure of Sasang is essential concept which is explaining the existence of mankind. An administrative strucrure of Sasang is operative concept which makes human as oneself. 4) It is necessary to have the insight to organize these four parts into the one organic whole if one has to comprehend the profound meaning of Sasang. 5) Four parts of Sasang structure could be matched as 'Heaven(天)-Affairs(事), Human(人)-Objects(物)', 'Nature (性)-Mind(心), Order(命)-Body(身)'.

• Journal of the Society of Naval Architects of Korea
• /
• v.40 no.5
• /
• pp.53-59
• /
• 2003

Ocean space utilization using VLFS(Very Large Floating Structures) can provide environmental impact free space by allowing sea water flow freely through the floating structure. Use of Pontoon type VLFS for that purpose needs employment of breakwaters for reduction of wave effects. Therefore, in order to maximize advantage of environmental impact free structure, the breakwater should be the one that can allow water flow freely through it, too. In this paper hydroelastic response of a pontoon type structure is analyzed considering breakwaters which allow water flow through its opening at bottom of the breakwaters. Mode superposition technique is used for solving equation of flexible body while interactions between the pontoon and breakwaters is considered based on generalized mode concept. Bi-quadratic nine node higher-order boundary element method is adopted for more accurate numerical treatment near sharp edged body shape. Performance of various combinations of breakwaters is investigated.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.12 no.2
• /
• pp.9-16
• /
• 2003

A strategy of the optimal shape design with FEA(Finite Element Analysis) for 2-D structure is proposed by comparing subproblem approximation method with first order approximation method. A cantilever beam with two different loading conditions, a concentrated load and an evenly distribute load, and truss structure with a concentrated loading condition are implemented to optimize the shape. It gives a good design strategy on the optimal truss structure as well as the optimal cantilever beam shape. It is found that the convergence is quickly finished with the iteration number below ten. Optimized shapes of cantilever beam and truss structure are shown with stress contour plot by the results of the subproblem approximation method and the first order approximation methd.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.05a
• /
• pp.243-248
• /
• 2001

The objective of this study is to investigate the thermal conductivity of cement mortar for apartment housing floor using expansive admixture, copper fiber, cower lathe, hollowed aluminum plate. According to test results, temperature at point (a) located above heating pipe does not show significant variation with age, and temperature at (b), which is located at the finishing surface above heating pipe, and temperature at (c), which is located at center surface between heating pipe has remarkable change. Temperature distribution sat (b) are in order for, structure containing copper fiber>plain structure>structure containing hollowed aluminum plate>structure containing expansive admixture. Temperature distribution, shows high tendency in order for, structure containing copper fiber>structure containing copper lathe>structure containing hollowed aluminum plate>plain structure>structure containing expansive admixture. (a) estimation of temperature distribution is determined with the variation of temperature between (b) point and (c) point during 60 minutes heating.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.5
• /
• pp.561-574
• /
• 2011

This study investigates the ultimate factor structure of consumer dissatisfaction with the off-line purchase and usage of clothing. It identifies the determinant dimensions of consumer dissatisfaction on clothing purchase and usage and investigates the hierarchical structure of consumer dissatisfaction by assessing and comparing the effectiveness of five alternative factor structure models. A total of 300 women were online-surveyed to assess the level of dissatisfaction based on their dissatisfying experience with clothing purchases and usage in terms of product quality, price, salesperson's attitude, and store environment. The exploratory factor analysis identified the underlying dimensions of dissatisfaction: Handling, Aesthetics, Salesperson, Size, Price, Product Quality, Service, and Environment. By employing a first-order confirmatory factor analysis and higher-order confirmatory factor analysis, consumer dissatisfaction was confirmed to have a hierarchical structure with three second-order constructs Intrinsic instrument is manifested by handling, quality, and size, Intrinsic expression consists of service, salesperson, and environment, and Extrinsic circumstance contains aesthetics and price. On empirically demonstrating the multi-dimensional constructs of consumer dissatisfaction by identifying its hierarchical structure, the study provides the theoretical and practical insights to comprehend consumer purchase and post-purchase behavior. Specifically, it affords an empirical platform to extend the scope of research with condensed concepts of dissatisfaction to researchers. In addition, it also enables marketers to take a broader view of consumer dissatisfaction by providing cues about potential problems and identifying the source of those problems.

• Steel and Composite Structures
• /
• v.33 no.6
• /
• pp.891-906
• /
• 2019

This study considers the instability behavior of sandwich plates considering magnetorheological (MR) fluid core and piezoelectric reinforced facesheets. As facesheets at the top and bottom of structure have piezoelectric properties they are subjected to 3D electric field therefore they can be used as actuator and sensor, respectively and in order to control the vibration responses and loss factor of the structure a proportional-derivative (PD) controller is applied. Furthermore, Halpin-Tsai model is used to determine the material properties of facesheets which are reinforced by graphene platelets (GPLs). Moreover, because the core has magnetic property, it is exposed to magnetic field. In addition, Kelvin-Voigt theory is applied to calculate the structural damping of the piezoelectric layers. In order to consider environmental forces applied to structure, the visco-Pasternak model is assumed. In order to consider the mechanical behavior of structure, sinusoidal shear deformation theory (SSDT) is assumed and Hamilton's principle according to piezoelasticity theory is employed to calculate motion equations and these equations are solved based on differential cubature method (DCM) to obtain the vibration and modal loss factor of the structure subsequently. The effect of different factors such as GPLs distribution, dimensions of structure, electro-magnetic field, damping of structure, viscoelastic environment and boundary conditions of the structure on the vibration and loss factor of the system are considered. In order to indicate the accuracy of the obtained results, the results are validated with other published work. It is concluded from results that exposing magnetic field to the MR fluid core has positive effect on the behavior of the system.