• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.88-89
• /
• 2009

In this paper, we investigated about wet cleaning effect as deep trench formation methods for Power chip devices. Deep trench structure was classified by two methods, PSU (Poly Stick Up) and Non-PSU structure. In this paper, we could remove residue defect during wet. cleaning after deep trench etch process for non-PSU structure device as to change wet cleaning process condition. V-SEM result showed void image at the trench bottom site due to residue defect and residue component was oxide by EDS analysis. In order to find the reason of happening residue defect, we experimented about various process conditions. So, defect source was that oxide film was re-deposited at trench bottom by changed to hydrophobic property at substrate during hard mask removal process. Therefore, in order to removal residue defect, we added in-situ SCI during hard mask removal process, and defect was removed perfectly. And WLR (Wafer Level Reliability) test result was no difference between normal and optimized process condition.

• 설비공학논문집
• /
• 제19권8호
• /
• pp.607-614
• /
• 2007

This paper investigated that the functional group and chemical structure of additives affect ice adhesion in aqueous solutions cooling with stirring. In order to compare the effect on the ice adhesion in aqueous solutions, the functional group like carboxyl (-COOH), hydroxyl(-OH) or amine($-NH_{2}$) one were compared each other. Among the functional group, the strength of the hydrogen bonding force order is amine, hydroxyl and carboxyl one. It supports that ethylene diamine 7 mass% solution including amine group was effective to suppress the ice adhesion, though it is corrosive. Also, the ice adhesion were effectively resisted and formed lots of ice slurries in cooling experiment of 7 mass% solution of 1, 2-and 1, 3-propanediol which is different molecular structure but equal molecular weight each other.

• 한국해안·해양공학회논문집
• /
• 제28권2호
• /
• pp.92-100
• /
• 2016

응력집중계수를 이용하여 해상풍력발전기 트라이포드 지지구조물에 대한 신뢰성 해석을 수행하였다. 파랑과 풍하중의 극치분포함수는 POT방법을 사용하여 동적응답을 분석함으로써 추정되었다. 일계신뢰도법을 사용하여 신뢰성해석을 수행하였으며, 한계상태함수는 지지구조물의 이음부에서 발생하는 응력을 기반으로 정의하였다. 보 요소에서 계산된 응력에 응력집중계수를 곱하는 방법과 판 요소를 사용하여 계산하는 두 가지 방법으로 최대응력을 계산하여 신뢰성 해석을 수행하고 결과를 비교 분석하였다.

• 동의생리병리학회지
• /
• 제17권6호
• /
• pp.1347-1355
• /
• 2003

The adapted scope of the Opening-covering-axis of Three-yin-three-yang can summary two parts. the first, former treatise of Gyeng-Lak emphasized the line structure by point and line but now we can understand expansible structure as not only line but also space of structure by the space structure of six-meeting. So the application of Gyeng-Lak can be various by extensive analysis of the Hand-three-yin-three-yang in Sky(Yang) including the Foot-three-yin-three-yang in Ground (Vin), even if the original text has limited examples. The second, former additional explanations of Hwangjenegyeng Sanghanlon by doctors can be profoundly analysis about the pathology and cure process of Three-yin-three-yang of human body. It has base on the metaphorically symbolized theory of Three-yin-three-yang. This is the Saeng-jang-shu-chang of So-yin, Tae-yang, Yang-myeng, So-yang. Tae-yin, Guel-yin in order. Also the circulation of Opening-covering-axis of Three-yin-three-yang has order in Tae-yang (Opening), Yang-myeng (Covering), So-yang (Axis), Tae-yin (Opening), Guel-yin (Covering), So-yin(Axis).

• Wind and Structures
• /
• 제15권3호
• /
• pp.189-208
• /
• 2012

Lock-in and drag amplification phenomena are studied for a flexible cantilever using a simplified fluid-structure interaction approach. Instead of solving the 3D domain, a simplified setup is devised, in which 2D flow problems are solved on a number of planes parallel to the wind direction and transversal to the structure. On such planes, the incompressible Navier-Stokes equations are solved to estimate the fluid action at different positions of the line-like structure. The fluid flow on each plane is coupled with the structural deformation at the corresponding position, affecting the dynamic behaviour of the system. An Arbitrary Lagrangian-Eulerian (ALE) approach is used to take in account the deformation of the domain, and a fractional-step scheme is used to solve the fluid field. The stabilization of incompressibility and convection is achieved through orthogonal quasi-static subscales, an approach that is believed to provide a first step towards turbulence modelling. In order to model the structural problem, a special one-dimensional element for thin walled cross-section beam is implemented. The standard second-order Bossak method is used for the time integration of the structural problem.

• Steel and Composite Structures
• /
• 제33권6호
• /
• pp.865-875
• /
• 2019

The current article proposed to develop a geometrical model for the analysis and modelling of the uniaxial functionally graded structure using the higher-order displacement kinematics with and without the presence of porosity including the distribution. Additionally, the formulation is capable of modelling three different kinds of grading patterns i.e., Power-law, sigmoid and exponential distribution of the individual constituents through the thickness direction. Also, the model includes the distribution of porosity (even and uneven kind) through the panel thickness. The structural governing equation of the porous graded structure is obtained (Hamilton's principle) and solved mathematically by means of the isoparametric finite element technique. Initially, the linear frequency parameters are obtained for different geometrical configuration via own computer code. The comparison and the corresponding convergence studies are performed for the unidirectional FG structure for the validation purpose. Finally, the impact of different influencing parameters like aspect ratio (O), thickness ratio (S), curvature ratio (R/h), porosity index (λ), type of porosity (even or uneven), power-law exponent (n), boundary condition on the free vibration characteristics are obtained for the FG panel and discussed in details.

• 동아시아식생활학회지
• /
• 제11권2호
• /
• pp.121-130
• /
• 2001

Jeung-Pyun Is a traditional fermented Korean food made with rice flour, water, sugar salt and unrefined rice wine(Tak-ju). In order to investigate how the addition of soybean and dextran have an influence on Jeung-Pyun fermentation and forming structure of Jeun-Pyun, adding soybean 20% and dextran 1%based on rice weight, we measured physicochemical properties. Also we measured dextran content of Jeung-Pyun batter according to the fermentation time and observed the inside of Jeung-Pyun by SEM in order to find out air pore condition. The dextran content of rice Jeung-Pyun and Jeung-Pyun adding soybean 20% was gradually increased as fermentation time was longer and Jeung-Pyun adding soybean 20% was higher than rice Jeung-Pyun. The specific volume of rice Jeung-Pyun and Jeung-Pyun adding soybean 20% was increased up to a fermentation time of 7~ 10 hours but it was decreased as fermentation time was longer. In the inside structure of Jeung-Pyun observed by SEM, the fermentation condition of Jeung-Pyun fermented for 3 and 7 hour was better and air pore size became larger, the number of it was decreased as fermentation time was longer. The air pore size of soybean 20% Jeung-Pyun is smaller more uniform than that of rice Jeung-Pyun. In conclusion. it can be suggested that the audition of soybean improves the quality of Jeung-Pyun and dextran has an influence on fermentation and forming structure of Jeung-Pyun.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1992년도 추계학술대회논문집; 반도아카데미, 20 Nov. 1992
• /
• pp.117-123
• /
• 1992

In recent years, the finite element method has become one of the most popular numerical technique for obtaining solutions of engineering science problems. However, there exist various uncertainties in modeling the problems, such as the dimensions(geometry shape), the material properties, boundary conditions, etc. The consideration for the uncertainties inherent in the problems can be made by understanding the influences of uncertain parameters[1]. Determining the influences of uncertainties as statistical quantities using the standard finite element method requires enormous computing time, while the probabilistic finite element method is realized as an efficient scheme[2,3] yielding statistical solution with just a few direct computations. In this paper, a formulation of the probabilistic fluid-structure interaction problem accounting for the first order perturbation of geometric shape is derived, and especially probabilistical acoustic pressure scattering from the structure with surrounding fluid is focused on. In Section 2, governing equations for the fluid-structure problems are given. In Section 3, a finite element formulation, based on the functional, is presented. First order perturbation of geometric shape with randomness is incorporated into the finite element formulation in conjunction with discretization of the random fields in Section 4 and 5. Finally, the proposed formulation is applied to a acoustic pressure scattering problem from an infinitely long cylindrical shell structure with randomness of radial perturbation.

• Biomolecules & Therapeutics
• /
• 제2권1호
• /
• pp.34-38
• /
• 1994

In order to investigate the structure-activity relationships of the stereoisomers of angiotensin converting enzyme inhibitors, captopril and its derivatives were selected as model compounds. In vitro enzymatic activities of them depend on the symmetry at the asymmetric carbons. Especially, the alanyl carbon should have the S configuration to be biologically active. But the demethylated captopril having the achiral carbon also shows the activity although it is less active than captopril. Seven stereoisomers of captopril and its derivatives were chosen and their acidic and ionic forms were used for molecular dynamics simulations. Four computer simulations were practiced for each model compound in order to obtain the good condition for simulation to explain the experimental structure-activity relationships. From the computer simulation results, relativistic movements of three well-known pharmacophoric sites, carboxylate carbon, carbonyl oxygen, and sulfur atoms, were analyzed. Good results were obtained from the aqueous solution molecular dynamics simulation with ionic forms of model compounds. Active model compounds have the pharmacophoric areas of 6.08 to 6.38 $\AA$$^2$and the similarity in the geometrical data. But inactive ones have the largely deviated values of 4.51 to 4.87 $\AA$$^2$from those of active ones.

• Journal of Mechanical Science and Technology
• /
• 제19권spc1호
• /
• pp.283-291
• /
• 2005

Accurate seismic analyses of large deformable moving structures are still unsolved problems in the field of earthquake engineering. In order to analyze these problems, the nonlinear finite element method formulated by the absolute nodal coordinate approach is noticed. Because, this formulation has several advantages over the standard procedures on mass matrix, elastic forces and damping forces in the case of large displacement problems. But, it has not been fully studied to build frame structure models by using beam elements in the absolute nodal coordinate formulation. In this paper, we propose the connecting method of the beam elements formulated by the absolute nodal coordinate. The coordinate transformation matrix of this element is introduced into the frame structure. This beam element has the characteristic that the mass matrix and bending stiffiness matrix are constant even if in the case of large displacement problems, and this characteristic is being kept after the transformation. In order to verify the proposed method, we show the numerical simulation results of frame structures for a vibration problem and a large displacement problem.