• 대한수학회지
• /
• 제46권6호
• /
• pp.1243-1254
• /
• 2009

The inverse scattering problem is investigated for some second order differential equation with a nonlinear spectral parameter in the boundary condition on the half line [0, $\infty$). In the present paper the coefficient of spectral parameter is not a pure imaginary number and the boundary value problem is not selfadjoint. We define the scattering data of the problem, derive the main integral equation and show that the potential is uniquely recovered.

• 로봇학회논문지
• /
• 제1권2호
• /
• pp.135-141
• /
• 2006

This paper presents offline estimation of equivalent physical damping parameter in haptic interaction systems where damping is the most important parameter for stability. Based on the previous energy bounding algorithm, an offline procedure is developed in order to estimate the physical damping parameter of a haptic device by measuring energy flow-in to the haptic device. The proposed method does not use force/torque sensor at the handgrip. Numerical simulation and experiments verified effectiveness of the proposed method.

• International Journal of Control, Automation, and Systems
• /
• 제4권6호
• /
• pp.689-696
• /
• 2006

This paper presents a new algorithm for the closed-loop $H_{\infty}$ composite control of weakly coupled bilinear systems with time-varying parameter uncertainties and exogenous disturbance using the successive Galerkin approximation(SGA). By using weak coupling theory, the robust $H_{\infty}$ control can be obtained from two reduced-order robust $H_{\infty}$ control problems in parallel. The $H_{\infty}$ control theory guarantees robust closed-loop performance but the resulting problem is difficult to solve for uncertain bilinear systems. In order to overcome the difficulties inherent in the $H_{\infty}$ control problem, two $H_{\infty}$ control laws are constructed in terms of the approximated solution to two independent Hamilton-Jacobi-Isaac equations using the SGA method. One of the purposes of this paper is to design a closed-loop parallel robust $H_{\infty}$ control law for the weakly coupled bilinear systems with parameter uncertainties using the SGA method. The other is to reduce the computational complexity when the SGA method is applied to the high order systems.

• 대한조선학회지
• /
• 제21권1호
• /
• pp.21-34
• /
• 1984

This paper is concerned with the experimental investigation of transverse vibration characteristics in water of rectangular plates having an inner free cutout. Systematic experiments are carried out to investigate effects of the surrounding water on the added mass and the natural frequency of the plates due to the changes of the aspect ratio, hole size and eccentricity. The main subject is the clamped rectangular plate with a circular hole. For the purpose of comparative evaluations, some other common-type boundary conditions and hole shapes such as ellipses and rectangles are also investigated. Some of the results obtain are as follows; 1) For each given aspect ratio of the plate, there is a hole area ratio which gives a minimum value of the nondimensional frequency parameter for each mode. The hole area ratio increases as the order number of the mode increases. 2) The nondimensinal mass-increment parameter decreases as the aspect ration or the order number of the mode increases. For each given aspect ratio, the parameter the fundamental mode decreases monotonically as the hole area ratio increase. In cases of the second and higher order modes, however, each mode has a hole area ratio which gives a maximum value of the parameter for each aspect ratio more then 2/3. 3) Comparing elliptic holes with rectangular ones with same hole area ratio, nondimensional frequency parameters are almost same for each given ratio of the shorter axises to the longer one. 4) The influences of difference in boundary condion on nondimensional frequency parameters in water are similar to those in air.

• Advances in nano research
• /
• 제10권3호
• /
• pp.271-280
• /
• 2021

The present work deals with an investigation on longitudinal wave propagation in nanobeams made of graphene sheets, for the first time. The nanobeam is modelled via a higher-order shear deformation theory accounts for both higher-order and thickness stretching terms. The general nonlocal strain gradient theory including nonlocality and strain gradient characteristics of size-dependency in order is used to examine the small-scale effects. This model has three-small scale coefficients in which two of them are for nonlocality and one of them applied for gradient effects. Hamilton supposition is applied to obtain the governing motion equation which is solved using a harmonic solution procedure. It is indicated that the longitudinal wave characteristics of the nanobeams are significantly influenced by the nonlocal parameters and strain gradient parameter. It is shown that higher nonlocal parameter is more efficient than lower nonlocal parameter to change longitudinal phase velocities, while the strain gradient parameter is the determining factor for their efficiency on the results.

• 한국강구조학회 논문집
• /
• 제13권1호
• /
• pp.101-113
• /
• 2001

본 연구의 주된 목적은 전단 층을 갖는 two-parameter 탄성지반 위에 놓인 복합적층판의 처짐에 관한 규명이다. 본 논문은 탄성지반에 놓인 비등방성 구조의 변형거동과 2중 조화함수를 이용한 3차 전단변형이론의 확장에 초점을 두고 있다. 유도된 식들을 검증하기 위해 Timoshenko의 탄성지반 위에 놓인 단순지지 된 등방성판과 LUSAS 프로그램에 의한 이방성판의 처짐과 비교하였으며 본 연구의 결과들은 등방성판과 이방성판의 결과와 매우 정확히 일치함을 알 수 있었다. 처짐에 관한 수치해석결과들은 폭-두께 비, 형상 비 재료 비등방성과 전단지반계수 등에 따른 효과를 보여준다.

• 대한기계학회논문집A
• /
• 제21권1호
• /
• pp.164-172
• /
• 1997

Two parameter technique that uses far-field stress and displacement distributions was applied to composite laminates in order to calculate mode II energy release rate, $G_{II}$ . The $G_{II}$ calculated by two parameter technique was compared with that calculated from the crack closure method to inspect the effectiveness of two parameter technique. Sensitivity study of two parameter technique to the crack extension size was also performed. The results showed that both methods produced comparable $G_{II}$ results. In particular, it was found that although the crack closure method was affected by the crack extension size, the two parameter technique was less affected by the crack extension size.

• 한국군사과학기술학회지
• /
• 제14권1호
• /
• pp.92-99
• /
• 2011

In this study, new multi-axial, critical plane based, fretting fatigue crack initiation parameter is developed by the addition of a new term into the Modified Shear Stress Range(MSSR) parameter. The newly developed parameter (MSSR') is then used to evaluate fretting fatigue life of titanium alloy, Ti-6A1-4V with various contact conditions. Finite element analysis is also used in order to obtain stress distribution on the contact surface during fretting fatigue test, which is then used for the calculation of fretting fatigue parameter. The MSSR' parameter shows better performance in predicting fretting fatigue lives from the conventional fatigue data, and less scattering within fretting fatigue data with different contact geometries.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.103-104
• /
• 2023

In this study, the correlation between the rheolog y parameter of fresh concrete and the rheology parameter of wet sieving mortar was analyzed for analyzing to possibility predicting the rheology parameter of fresh concrete. Through the experiment, the dynamic yield stress and plastic viscosity of concrete and wet sieving mortar show a direct proportional relationship, and the two data had a correlation. Therefore, it is thought that it is possible to predict the rheology parameter of fresh concrete through the rheology parameter of wet sieving mortar. However, in order to more accurately predict the rheology parameter of fresh concrete, it is need additional relationship analysis by collecting more rheology parameter data of fresh concrete and wet sieving mortar.

• Communications for Statistical Applications and Methods
• /
• 제15권2호
• /
• pp.283-292
• /
• 2008

커널밀도함수의 추정을 이용한 분류 문제에서 평활모수(smoothing parameter, bandwidth)의 선택은 핵심적으로 중요한 역할을 한다. 본 논문에서는 분류에서 베이즈 리스크를 최적화하기 위한 평활모수의 선택이 각 개별 확률밀도함수를 추정하기 위한 최적의 평활모수와 어떤 관계가 있는지 살펴보았다. 실제 상황에서 사용할 수 있는 평활모수의 선택 방법으로 붓스트랩(bootstrap)과 교차확인법(cross-validation)을 이용하는 것을 비교한 결과, 붓스트랩 방법은 Hall과 Kang (2005)에서 밝혀진 이론적인 성질에 부합하는 반면 교차확인법은 그렇지 못함을 확인하였다. 또한, 각 방법으로 정한 평활모수를 사용하여 오분류율을 조사해 본 결과에서도 붓스트랩 방법이 우월함을 알 수 있었다.