• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.5
• /
• pp.141-151
• /
• 2018

A trajectory analysis program was developed to predict KSLV-II (Korea Space Launch Vehicle-II) performance with the reducing weight. The program estimates the LEO (Low Earth Orbit) / SSO (Sun-Synchronous Orbit) injection performance, which is determined as payload weight for the orbits, with decreasing the structural ratio or increasing rocket engine power. It is expected that the KSLV-II can transport up to 4.5 tons, 3 tons of space payloads at LEO, SSO with a reduced structural ratio by 60% of the original. It also shows that the KSLV-II can transport up to 3.65 tons at SSO by applying advanced engines of 90 tonf, 10 tonf class with the reduced structure.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.614-619
• /
• 1988

In this paper, an arbitrary mission of a spacecraft from launch to orbit injection is investigated for some launch trajectories. Launch sites are selected arbitrarily from various locations in Korea. For this study, a general purpose simulation program is developed. In this program, the Earth is assumed to be a rotating ellipsold. The launch vehicle is treated as a 3-D, 6-DOF rigid body. The developed program has been evaluated by calibrating it to the 3-stage N-1 rocket developed in Japan and launched at Tanegasima. The simulated trajectory from the first-stage ignition to burnout of third-stage main engine is compared with the previously tested N-1 rocket trajectory in Japan. The result shows that the program works properly. Using the proven program, we have investigated possible launch locations in Korea, namely Marado, Sungsan and Kuryongpo. The problem of polar orbit injection is also examined.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.4
• /
• pp.319-326
• /
• 2013

This paper describes the orbital dynamics operation results for the launch and early operations phase (LEOP) of KOMPSAT-3, which was successfully launched on May 18, 2012. At the initial phase, operational orbit determination was carried out using ground tracking data and GPS navigation solution. And, both in-plane and out-of plane maneuvers were executed in order to change the orbit from the injection orbit to the mission orbit. In addition, the accuracy of precise orbit determination was indirectly evaluated by overlapping method using GPS raw data of KOMPSAT-3 and international GNSS service data from worldwide-distributed ground stations. Currently, KOMPSAT-3 is operated in pre-defined mission orbit, and its various kinds of orbit data are generated and distributed to support the normal mission operations.

• The Bulletin of The Korean Astronomical Society
• /
• v.32 no.2
• /
• pp.38.2-38.2
• /
• 2007

• Bulletin of the Korean Space Science Society
• /
• 2008.10a
• /
• pp.25.3-26
• /
• 2008

The direct way to the moon is to start from the parking orbit by using impulsive thruster In previous domestic research, the direct way has been studied by using a single impulsive shot. However, when a single impulsive shot occurs to go into a Translunar orbit, gravity losses occur because thruster is not impulsive shot but the finite burns and it causes the gravity losses. To make up for the weak point of a single impulsive shot, this paper divides TLI (Trans Lunar Injection) into several small burns. Therefore, departure loop trajectory and the Translunar trajectory. This method is useful not only to reduce the gravity losses but also to check the condition of satellite. By using this method, this paper demostrates the optimized trajectory from Earth parking orbit to lunar mission orbit which minimizes the fuel, and the SNOPT (Sparse Nonlinear OPTimizer software) is used to find optimal solution. Also, this paper provides lunar mission profile which includes the mission schedule when TLI, LOI (Lunar Orbit Insertion) maneuvers occur, a mount of fuel when thruster is used and other mission parameters.

• ETRI Journal
• /
• v.25 no.5
• /
• pp.387-400
• /
• 2003

Since its launching on 21 December 1999, the Korea Multi-Purpose Satellite-I (KOMPSAT-I) has been successfully operated by the Mission Control Element (MCE), which was developed by the ETRI. Most of the major functions of the MCE have been successfully demonstrated and verified during the three years of the mission life of the satellite. This paper presents the operational performances of the various functions in MAPS. We show the performance and analysis of orbit determinations using ground-based tracking data and GPS navigation solutions. We present four instances of the orbit maneuvers that guided the spacecraft form injection orbit into the nominal on-orbit. We include the ground-based attitude determination using telemetry data and the attitude maneuvers for imaging mission. The event prediction, mission scheduling, and command planning functions in MAPS subsequently generate the spacecraft mission operations and command plan. The fuel accounting and the realtime ground track display also support the spacecraft mission operations.

• Aerospace Engineering and Technology
• /
• v.10 no.2
• /
• pp.65-73
• /
• 2011

After launch, in order to inject the geostationary satellite into its operational orbit, the perigee altitude are forced to be raised to geostationary altitude by firing onboard LAE(Liquid Apogee Engine) at apogee of the transfer orbit. In this process, the LAE burn is divided into three or four separated burns in order to control the orbit very precisely by giving feedback the determined orbit informations and to inject the satellite in predefined longitude. This paper proposes an algorithm to determine LAE firing time slots and ${\Delta}V$ vectors under assumption of impulsive LAE burning, and additionally, a method to compensate errors induced by continuous burning. And computer simulations have been performed to validate proposed algorithms.

• Journal of the Korean Magnetics Society
• /
• v.25 no.1
• /
• pp.1-3
• /
• 2015

We demonstrate here an optical measurement technique to quantify the spin-orbit torques. The magnetization dynamics induced by the spin-orbit torques with a sinusoidal current injection is measured by use of polar magneto-optical Kerr effect. The measured signal is then analyzed based on the Landau-Lifhshitz-Gilbert equation with consideration of the spin-orbit torques. The present measurement technique is applied to Pd/Co/Pt films and then, the longitudinal and transverse components of the spin-orbit torques are successfully quantified. The present optical technique provides an alternative way to quantify the spin-orbit torques.

• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.46-46
• /
• 2003

Since its launching on 21 December 1999, the KOrea Multi-Purpose SATellite-Ⅰ (KOMPSAT-Ⅰ) has been successfully operated by the Mission Control Element (MCE), which was developed by the Electronics and Telecommunications Research Institute (ETRI). Most of the major functions of the MCE have been successfully demonstrated and verified during the three years of the mission life of the satellite. The Mission Analysis and Planning Subsystem (MAPS), which is one of the four subsystems in the MCE, played a key role in the Launch and Early Orbit Phase (LEOP) operations as well as the on-orbit mission operations. This paper presents the operational performances of the various functions in MAPS. We show the performance and analysis of orbit determinations using ground-based tracking data and GPS navigation solutions. We present four instances of the orbit maneuvers that guided the spacecraft from injection orbit into the nominal on-orbit. We include the ground-based attitude determination using telemetry data and the attitude maneuvers for imaging mission. The event prediction, mission scheduling, and command planning functions in MAPS subsequently generate the spacecraft mission operations and command plan. The fuel accounting and the realtime ground track display also support the spacecraft mission operations. We also present the orbital evolutions during the three years of the mission life of the KOMPSAT-Ⅰ.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.214-219
• /
• 2002

As the tangential flow inside the clearance of tribe elements such as bearings and seals is increased as the shaft speed increases, the system stability will be decreased due to the increment of the instability parameter. To reduce the tangential flow inside the clearance of the balance sleeve, anti-swirl injection mechanism is applied. The balance sleeve is used in resisting the axial force induced by impeller in high pressure multi-stage pump. In this paper, total three cases are experimentally investigated; original balance steeve, anti-swirl injection balance steeve with 0 axial degree and anti-swirl injection balance sleeve with 30 axial degree. Experiments are focused in the comparison of vibration level and leakage flow rate. The results clearly shows that the anti-swirl injection balance sleeve with 0 axial degree improves the vibration characteristics. However, the anti-swirl injection balance sleeve with 30 degree aggravates the vibration characteristics. In the standpoint of leakage performance, both anti-swirl injection balance sleeves show the better result than the original balance sleeve.