• Journal of Energy Engineering
• /
• v.23 no.4
• /
• pp.123-129
• /
• 2014

ESCO industry should guarantee the energy saving performance with M&V such as developed countries. The application of the ESCO M&V is a necessary condition on energy saving performance. This study recommends a goal, direction, and order of application and suggests selection of M&V between option A, option B, option C, option D by energy conservation technology in Korea, with reference to the examples from IPMVP and applied in US and Japan. In the future, it is needed to study on the guideline for plan report and result report of M&V based on a goal, direction, and selection of M&V option.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.8
• /
• pp.31-40
• /
• 2009

This paper presents a design of a high performance DC-DC boost converter as a power module for SOC designs. It applied to this chip that reduced inductor and capacitor for integrating on a chip, and it operates with a switching frequency of 100MHz. It has reliability and stability in high switching frequency. The controller of DC-DC boost converter is designed by voltage-mode control method and compensated properly. The designed DC-DC converter is fabricated with the 0.18${\mu}m$ standard CMOS technology with a thick-gate oxide option. The overall die size is 8.14$mm^2$, and controller size is 1.15$mm^2$. The converter has the maximum efficiency over 76% for the output voltage of 4V and load current larger 300mA. The load regulation is 0.012% (0.5mV) for the load current change of 100mA.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.2
• /
• pp.551-559
• /
• 2015

This paper's focus is in reducing the torque ripple and increasing the average torque by optimizing switching angles of 8/6 switched reluctance motor while implementing a robust speed controller in the outer loop. The mathematical model of the machine is developed and it is simulated using MATLAB/Simulink. An objective function and constraints are formulated and Optimum turn-on and turn-off angles are determined using Particle swarm optimization and Genetic Algorithm techniques. The novelty of this paper lies in implementing sliding mode speed controller with optimized angles. The results from both the optimization techniques are then compared with initial angles with one of them clearly being the better option. Speed response is compared with PID controller.

• Journal of Chest Surgery
• /
• v.50 no.4
• /
• pp.281-286
• /
• 2017

Background: In chemical pleurodesis for managing pulmonary air leak, tetracycline derivatives are commonly used, and their effectiveness has been established in many studies. Recently, a Viscum album extract was used in chemical pleurodesis. We compared the effects of V. album with those of a tetracycline derivative (doxycycline) to demonstrate the therapeutic effectiveness of the V. album extract in chemical pleurodesis for managing pulmonary air leak. Methods: Between October 2010 and October 2016, chemical pleurodesis was performed using doxycycline in 40 patients and the V. album extract in 37 patients. Thirty-three patients were in the postoperative state after pulmonary resection, and 44 patients suffered from spontaneous pneumothorax. Results: No statistically significant difference in the success rate was observed between the 2 groups (V. album extract and doxycycline). In both groups, chest pain was the most common complication. More patients in the doxycycline group complained of severe chest pain (42.1% vs. 13.5%, p=0.006). In the V. album extract group, 24.3% of the patients required a chest tube to drain the pleural effusion after cessation of the air leak (doxycycline group: 5%, p=0.022). Further, the amount of pleural effusion drained on the day after the last chemical pleurodesis in the V. album extract group was greater than that in the doxycycline group ($162.2{\pm}170.2mL$ vs. $97.0{\pm}77.2mL$, p=0.032). All patients were discharged from the hospital without complications after pleural effusion drainage. Conclusion: Considering that treatment using the V. album extract was less painful, V. album might be a feasible option for chemical pleurodesis. However, pleural effusion should be monitored carefully when using V. album extract for treating patients suffering from air leak.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.10 no.4
• /
• pp.316-324
• /
• 2010

In this paper, we design a 256 kbits EEPROM for a MCU (Microcontroller unit) with the wide voltage range of 1.8 V to 5.5 V. The memory space of the EEPROM is separated into a program and data region. An option memory region is added for storing user IDs, serial numbers and so forth. By making HPWs (High-voltage P-wells) of EEPROM cell arrays with the same bias voltages in accordance with the operation modes shared in a double word unit, we can reduce the HPW-to-HPW space by a half and hence the area of the EEPROM cell arrays by 9.1 percent. Also, we propose a page buffer circuit reducing a test time, and a write-verify-read mode securing a reliability of the EEPROM. Furthermore, we propose a DC-DC converter that can be applied to a MCU with the wide voltage range. Finally, we come up with a method of obtaining the oscillation period of a charge pump. The layout size of the designed 256 kbits EEPROM IP with MagnaChip's 0.18 ${\mu}m$ EEPROM process is $1581.55{\mu}m{\times}792.00{\mu}m$.

• Advances in materials Research
• /
• v.12 no.2
• /
• pp.119-131
• /
• 2023

The development of sustainable composites materials, from recycled polymeric materials and waste from the wood industry and stone processing, allows reducing the volume of these by-products, minimizing impacts on health and the environment. Nowadays, Polypropylene (PP) is the most recycled polymer in industry, while the furniture industry has increasingly used timber felled from sustainable forest plantations as a eucalypt. The powder tailing from the ornamental stone extraction and processing industry is commonly disposed of in the environment without previous treatment. Thus, the technological option for the development of composite materials presents itself as a sustainable alternative for processing and manufacturing industries, enabling the development of new materials with special technical features. The results showed that powder granite particles may be incorporated into the polypropylene matrix associated with short eucalyptus fibres forming green hybrid composites with potential application in structural engineering, such as transport and civil construction industries.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.9 s.351
• /
• pp.23-30
• /
• 2006

This paper presents a design of a high-efficiency CMOS DC-DC boost converter using a current-sensing feedback method. High-precision current-sensing circuity is incorporated in order to sense the current flowing in the inductor, which determines the switching scheme of the pulse-width modulation. The external components or large chip area for the frequency compensation can be avoided while maintaining the stable operations of the converter. Various input/output voltage levels can be available through the external resistor strings. The designed DC-DC converter is fabricated in a 0.18-um CMOS technology with a thick-gate oxide option. The converter shows the maximum efficiency over 90% for the output voltage of 3.3V and load current larger than 200mA. The load regulation is 1.15% for the load current change of 100mA.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.2
• /
• pp.325-328
• /
• 2020

This paper demonstrated a voltage-controlled oscillator (VCO) using cost-effective (1-poly 6-metal) mixed signal standard CMOS process. To have the high-quality factor inductor in LC resonator with thin metal thickness, patterned-ground shields (PGS) was adopted under the spiral to effectively reduce the ac current of low resistive Si substrate. And, because of thin top-metal compared with that of RF option (2 ㎛), we make electrically connect between the top metal (M6) and the next metal (M5) by great number of via array along the metal traces. The circuit operated from 2.48 GHz to 2.62 GHz tuned by accumulation-mode varactor device. And the measured phase noise of LC VCO has -123.7 dBc/Hz at 1MHz offset at 2.62 GHz and the dc-power consumption shows 2.07 mW with 1.8V supply voltage, respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.6
• /
• pp.491-495
• /
• 2007

This paper has demonstrated the electrical properties of SiGe pMOSFETs fabricated on both bulk-Si and PD SOI substrates. Two principal merits, the mobility increase in strained-SiGe channel and the parasitic capacitance reduction of SOI isolation, resulted in improvements in device performance. It was observed that the SiGe PD SOI could alleviate the floating body effect, and consequently DIBL was as low as 10 mV/V. The cut-off frequency of device fabricated on PD SOI substrate was roughly doubled in comparison with SiGe bulk: from 6.7 GHz to 11.3 GHz. These experimental result suggests that the SiGe PD SOI pMOSFET is a promising option to drive CMOS to enhance performance with its increased operation frequency for high speed and low noise applications.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.3
• /
• pp.337-343
• /
• 2008

There are various hull types on the mid-size superyachts around $30\;{\sim}\;45m$. In any case, it is important to design the proper hull shape in viewpoint of the reduction of wave resistance, because small vessels such as superyachts are running at relatively higher Froude Number than other merchant ships. FLUENT with a VOF option was employed to investigate the flow fields around the superyachts having three-typical hull types: U-, V-types and catamaran. Overall performances including free surface flow were compared to figure out hydrodynamic characteristics of superyachy by numerical simulation.