• Title/Summary/Keyword: optimum washing condition

Search Result 60, Processing Time 0.024 seconds

A Study on the Desulfurization and Demineralization by Chemical Treatment of Petroleum Cokes (Petroleum Cokes의 화학적 처리에 의한 황성분 및 회분제거에 관한 연구)

  • Han, Woong;Lee, Si-Hyun;Park, Chu-Sik;Yang, Hyun-Soo
    • Applied Chemistry for Engineering
    • /
    • v.7 no.6
    • /
    • pp.1115-1124
    • /
    • 1996
  • An MCL(Molten Caustic Leaching) treatment is a chemical refinery process which is used for the desulfurization and demineralization by alkali treatment. The MCL treatment removes ash by converting mineral like Si, Fe, V, Ni etc. in petroleum cokes into soluble salts. The MCL has an advantage minimizing carbon loss in comparison to other desulfurization process. Reaction variables for the desulfurization and demineralization in the study were leaching temperature, leaching time, ratio of caustic to cokes, acid concentration and time for washing, and particle size. At the optimum condition, above 99% of desulfurization and about 90% of demineralization was obtained. FT-IR and SEM analysis showed that the structure and surface of the particle was closely related with the degree of sulfur and ash removal, and leaching temperature as well.

  • PDF

Removal of Copper and Zinc Ions by Neutralization from the Spent Sulfate Solutions of Brass Bulb Base (황동(黃銅) 전구(電球) Base 제조과정(製造過程)에서 발생(發生)한 구리와 아연 함유(含有) 황산폐수(黃酸廢水)의 중화법(中和法)에 의한 제거(除去))

  • Lee, Man-Seung;Ahn, Jae-Woo;Lee, Chang-Hae
    • Resources Recycling
    • /
    • v.16 no.6
    • /
    • pp.39-45
    • /
    • 2007
  • Optimum condition for neutralization has been studied to remove the copper and zinc ions from spent sulfate solutions which resulted from the acid washing of the base of brass bulb. Chemical distribution of copper and zinc species and the variation of solubility of the two ions with solution pH were obtained by considering the complex formation reaction and mass balance. Removal percentage of zinc was more sensitive to solution pH than that of copper. This results from the fact that the solubility of zinc is higher than that of copper. The form of coagulant affected little the removal percentage of zinc, while addition of coagulant as the phase of solution resulted in higher removal percentage of copper than as the phase of solid.

Packaging technology of fresh-cut produce (신선편의식품 포장기술)

  • Kim, Ji Gang
    • Food Science and Industry
    • /
    • v.50 no.2
    • /
    • pp.12-26
    • /
    • 2017
  • Processing steps such as washing and cutting, involved in preparing fresh-cut produce causes tissue damage, leading to rapid quality deterioration. Major defects of fresh-cut produce are discoloration, softening, off-odor development, and microbial growth. Packaging of fresh-cut produce has been changed to reduce these quality problems. Flexible packaging film is widely used to pack fresh-cut produce. Vacuum packaging was the popular packaging method in the beginning of fresh-cut industry in Korea. Vacuum packaging creates high $CO_2$ and low $O_2$ levels to control browning of fresh-cut produce. However, these conditions induce some visual defects and off-odor development. Discoloration problem was also found when fresh-cut produce was packaged with conventional packaging film or plastic tray. Modified atmosphere (MA) packaging is effective for prolonging shelf-life of fresh-cut produce by decreasing $O_2$ and increasing $CO_2$ concentration in the package. Retail MA packaging using different oxygen transmission rate (OTR) film and micro-perforated film has started to be applied to fresh-cut produce in Korea. Proper MA package design that provides optimum range of $O_2$ and $CO_2$ partial pressures is one of the major challenges in the industry. An initial package flushing with $N_2$ or an low $O_2$/high $CO_2$ atmosphere is also used to more rapidly establish steady-state MA condition. Film OTR and $O_2$ flushing affects the fermentative volatile production, off-odor development, electrolyte leakage, discoloration, $CO_2$ injury, microbial population of fresh-cut produce. There is also a demand for convenient packaging to attract consumers. Rigid fresh-cut produce container for retail market has increased since the packaging provides excellent protection from physical damage during transport. Rigid tray used as actual serving vessel for the consumer is increasing in Korea. The tray with flexible lid to wrap or seal fresh-cut produce is more and more gaining popularity. Further practical technology to control quality change and microbial growth for each fresh-cut product has been studied since various fresh-cut items were required. The fresh-cut industry also focuses on searching for more convenient and environmentally friendly packaging.

Dyeing Properties of Yerba Mate Tea on the Fabrics (마테차를 이용한 직물의 염색성)

  • Yoo, Hye-Ja;Jeon, Sung-Taek
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.36 no.4
    • /
    • pp.412-421
    • /
    • 2012
  • The yerba mate that grows in the subtropical forests of South America is an evergreen tree within the Aquifoliaceae family. The yerba mate (Ilex paraguariensis) tea is habitually used as a drink in Argentina, Paraguay, Uruguay, and Southern Brazil. A wild mate tree needs about 25 years to fully grow to 15 a height of meters; however, they only grow to a height of 3-5 meters when cultivated. The leaves are 7-11 cm long and 3-5cm wide with a serrated margin. Yerba mate tea-based beverages are made from the leaves and stems of the mate tree. It is known that they contain a rich content of antioxidants and polyphenol, vitamins, amino acids, minerals and colorants. Dyeing properties of a mate plant in the silk, wool, linen and cotton fabrics were investigated. Constituents of colorant of mate tea are chlorophyll and carotinoid; in addition, it has more minerals such as (Fe, Ca, Mn, Mg, Na, K, Zn, and Cu) than green tea. Mate tea colorants showed good affinity to silk and wool fabrics. It was found that the optimum condition for dyeing was 30 minutes for dyeing time, 7 for pH of dyebath, and at a dyeing temperature of $80^{\circ}C$. The maximum absorbance wavelength (${\lambda}_{max}$) of silk and wool fabrics dyed with mate tea were at 420-440nm; however, that of linen and cotton fabrics were at 400nm. K/S values of fabrics dyed under optimum conditions were 1.979 for silk fabrics, 1.541 for wool fabrics, 0.551 for linens and 0.465 for cotton fabrics. Munsell hue values of dyed fabrics measured 3.1Y-6.4GY for silk, 1.4Y-8.3Y for wool, 5.5Y-3.7GY for linen, and 5.3Y-1.3GY for cotton. All dyed fabrics showed hues in-between greenish yellow and greenyellow. Colorfastness to rubbing, perspiration and dry-cleaning of dyed fabrics with mate tea were very good; however, the grades of colorfastness to washing of dyed linen and cotton fabrics were poor, and colorfastness to light were poor.

A Study on Operating Condition of Test-Bed Plant using Membrane filtration of D Water Treatment Plant in Gwang-Ju (D정수장 정밀여과막 실증플랜트의 최적 운전조건 연구)

  • Yang, Hyung-Jae;Yi, Seung-Hoon;Moon, Kyung-Ran
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.39 no.3
    • /
    • pp.155-163
    • /
    • 2017
  • Membrane filtration has become more popular in drinking water treatment recently, since the filtration can control not only particulate matters but also pathogenic microorganisms such as giardia and cryptosporidium very effectively. Pilot-scale ($120m^3/d$ of treatment capacity) and test-bed ($25,000m^3/d$ of treatment capacity) microfiltration experiments were conducted to find optimum operating mode and the critical flux. Optimum operating mode of pilot-test was assessed as inflow 1.0 min, filtration 36.5 min, air backwash 0.9 min, backwash 1.0 min and outflow 1.0 min with 50 LMH ($L/min{\cdot}m3^$) of critical flux. Critical Flux was calculated to be $50L/m^2-h$ (within TMP 0.5 bar) based on the increase formula of the transmembrane pressure difference according to the change of time at Flux 20, 40, 56 and 62 LMH in pilot operation. Chemical cleaning was first acid washed twice, and alkali washing was performed secondarily, and a recovery rate of 95% was obtained in the test-bed plant. The results of operating under these appropriate conditions are as follows. Turbidity of treated water were 0.028, 0.024, 0.026 and 0.028 NTU in spring, summer, autumn and winter time, respectively. Microfiltration has superior treatment capability and performance characteristics in removing suspended solids and colloidal materials, which are the main cause of turbidity and important carrier of metal elements, and it has shown great potential in being an economically substitute to traditional processes (sand filtration).

Characteristics on Chemical Activation and VOCs Adsorption of Activated Carbon according to Mixing Ratio of Anthracite and Lignite (활성탄 제조시 유·무연탄 혼합에 따른 화학적 활성화 및 휘발성유기화합물 흡착 특성)

  • Cho, Joon-Hyung;Kang, Sung-Kyu;Kang, Min-Kyoung;Cho, Kuk;Oh, Kwang-Joong
    • Clean Technology
    • /
    • v.23 no.4
    • /
    • pp.364-377
    • /
    • 2017
  • In this study, to improve the low surface area of domestic anthracite as raw materials of activated carbon, characteristics on chemical activation and VOCs adsorption of activated carbon according to mixing ratio of anthracite and lignite. For these, properties of raw materials, parameter characteristics of preparation processes for activated carbon, and VOCs adsorption characteristic of the prepared activated carbon are analyzed. The experimental results showed that, the domestic anthracite had disadvantages of high contents for ash and lead, arsenic, which were exceeded for the heavy metal limits, in the properties of raw materials. To improve these diadvantages, using the mixing ratio of anthracite and lignite, and the optimum conditions for pretreatment, activation, washing, and pellitization process, the activated carbon had a range of BET (Brunauer-Emmett-Teller) surface area of $1,154{\sim}1,420m^2g^{-1}$ with mesopore development and hydrophobic surface property. The carbons were satisfied with the quality standard for granular activated carbon, and had similar physicochemical properties with the commercial activated carbon. The minimum mixing condition for commercial VOCs activated carbon performance must have the caloric value of above $5,640kcal\;kg^{-1}$, and the carbon had higher adsorption capacity with order of xylene > toluene > benzene according to more higher molcular weight and hydrophobic property.

The Preparation of Activated Carbon from Coffee Waste: ZnCl2-Activation (커피폐기물을 이용한 활성탄의 제조: ZnCl2-활성화)

  • You, S.H.;Kim, H.H.
    • Applied Chemistry for Engineering
    • /
    • v.9 no.4
    • /
    • pp.509-515
    • /
    • 1998
  • Activated coffee chars were prepared from coffee waste by chemical activation with zinc chloride. In this study, the following processes were carried out ; roasting step, carbonization step, chemical activation step, and washing and drying step. The roasting step of coffee waste was carried out at $300{\sim}400^{\circ}C$ for 10 minutes. The optimum condition of carbonization was at $650^{\circ}C$ for 1 hour. The most important parameter in chemical activation of coffee char was found to be the chemical ratio of activation agents. Activated coffee chars prepared by various activation methods were characterized in terms of the nitrogen BET surface area, the BJH pore volume and pore size distribution at 77 K. The $N_2$-BET surface areas and total pore volume of coffee chars prepared by the chemical activation with $ZnCl_2$ were determined as about $1110{\sim}1580m^2/g$ and $0.51{\sim}0.81cm^3/g$, respectively. Scanning Electron Microscopy (SEM) was used to observe the porosity and surface of activated coffee chars. From the results of SEM analysis, it was shown that active surface and many pores were formed after the chemical activation. The preparation of the activated coffee char from coffee waste was successfully carried out, which previews a possibility for exploitation of resources by recycling the waste.

  • PDF

Effects of Different Germination Characteristics, Sowing Date and Rain Sheltered Cultivation on Stable Seed Production in Scutellaria baicalensis Georgi (황금 종자 안정생산을 위한 발아특성, 파종적기, 비가림 시설효과)

  • Kim, Myeong Seok;Kim, Yong Soon;Choi, Jin Gyung;Park, Heung Gyu;Shin, Hae Ryoung;Kim, Seong Il;Kim, Young Guk;Park, Chun Geun;Ahn, Young Sup;Cha, Seon Woo;Kim, Kwan Su
    • Korean Journal of Medicinal Crop Science
    • /
    • v.24 no.2
    • /
    • pp.101-109
    • /
    • 2016
  • Background: The purpose of this study was to evaluate methods to reduce seeding expenses, thereby increasing farm income. This study investigated the effects of rain shelter controlled cultivation and adapted seeding times on the stable seed production of Scutellaria baicalensis Georgi. Methods and Results: Seed germination was conducted under 10 condition compose to control, water washing, cold storage at $4^{\circ}C$ for 15 days, seed sterilization with a benomyl pesticides, hormone treated seed by submerging in 100 ppm $GA_3$ with the cold storage at $20^{\circ}C$ and $25^{\circ}C$, darkness in a covered petridish and illuminated with a 1,500 Lux lamp. There were three cultivation type, open cultivation with non-woven fabric mulching, cultivation with a vinyl covering and rain sheltered in a plastic greenhouse. Sowing dates were April 27, May 18, June 7 and June 28, 2013. Plants were spaced 10 cm apart in rows 30 cm apart. Mixed oil cake fertilizer, $N-P_2O_5-K_2O$ (12-10-10) was applied at $600kg{\cdot}10a^{-1}$. Conclusions: Optimum germination occured in darkness at $25^{\circ}C$ and cold storage after submerging in $GA_3$. The highest seed yields ($4.5kg{\cdot}10a^{-1}$) occurred in the plastic greenhouse for the April 25 sowing. The highest root yield (17%) was found on April 1, under greenhouse conditions.

$V_H$ Gene Expression and its Regulation on Several Different B Cell Population by using in situ Hybridization technique

  • Jeong, Hyun-Do
    • Journal of fish pathology
    • /
    • v.6 no.2
    • /
    • pp.111-122
    • /
    • 1993
  • The mechanism by which $V_H$ region gene segments is selected in B lymphocyte is not known. Moreover, evidence for both random and nonrandom expression of $V_H$ genes in matured B cells has been presented previously. In this report, the technique of in situ hybridization allowed us to analyze expressed $V_H$ gene families in normal B lymphocyte at the single cell level. The analysis of normal B cells in this study eliminated any posssible bias resulting from transformation protocols used previously and minimized limitation associated with sampling size. Therefore, an accurate measure of the functional and expressed $V_H$ gene repertoire in B lymphocyte could be made. One of the most important controls for the optimization of in situ hybridization is to establish probe concentration and washing stringency due to the degree of nucleotide sequence similarlity between different families which in some cases can be as high as 70%. When the radioactive $C{\mu}$ and $V_{H}J558$ RNA probes are tested on LPS-stimulated adult spleen cells, $2{\sim}4{\times}106cpm$/slide shows low background and reasonable frequency of specific positive cells. For the washing condition. 40~50% formamide at $54^{\circ}C$ is found to be optimum for the $C{\mu}$. $V_{H}S107$ and $V_{H}J558$ probes. The analyzed results clearly demonstrate that the level of each different $V_H$ gene family expression is dependent upon the complexity or size of that family. These findings are also extended to the level of $V_H$ gene family expression in separated bone marrow B cells depend upon the various stage of differentiation and conclude no preferential utilization of specific $V_H$ gene family. Thus, the utilization of VH gene segments in B lymphocyte of adult BALB/c mice is random and is not regulated or changed during the differentiation of B cells.

  • PDF

Current Status of the Research on the Postharvest Technology of Melon(Cucumis melo L.) (멜론(Cucumis melo L.) 수확 후 관리기술 최근 연구 동향)

  • Oh, Su-Hwan;Bae, Ro-Na;Lee, Seung-Koo
    • Food Science and Preservation
    • /
    • v.18 no.4
    • /
    • pp.442-458
    • /
    • 2011
  • Among Cucubitaceae, melon (Cucumis melo) is one of the most diversified fruits, with various forms, sizes, pulps, and peel colors, In addition, it is a commercially important crop because of its high sweetness, deep flavor, and abundant juice. In the species, there are both climacteric and non-climacteric melons depending on the respiration and ethylene production patterns after harvest. Ethylene is also considered a crucial hormone for determining sex expression, Phytohormones other than ethylene interact and regulate ripening, There are some indices that can be used to evaluate the optimum harvest maturity. The harvest time can be estimated after the pollination time, which is the most commonly used method of determining the harvest maturity of the fruit. Besides the physiological aspects, the biochemical alterations, including those of sweetness, firmness, flavor, color, and rind, contribute to the overall fruit quality. These changes can be categorized based on the ethylene-dependent and ethylene-independent phenomena due to the ethylene-suppressed transgenic melon. After harvest, the fruits are precooled to $10^{\circ}C$ to reduce the field heat, after which they are sized and packed. The fruits can be treated with hot water ($60^{\circ}C$ for 60 min) to prevent the softening of the enzyme activity and microorganisms, and with calcium to maintain their firmness. 1-methylenecyclopropene (1-MCP) treatment also maintains their storability by inhibiting respiration and ethylene production. The shelf life of melon is very short even under cold storage, like other cucurbits, and it is prone to obtaining chilling injury under $10^{\circ}C$. In South Korea, low-temperature ($10^{\circ}C$) storage is known to be the best storage condition for the fruit. For long-time transport, CA storage is a good method of maintaining the quality of the fruit by reducing the respiration and ethylene. For fresh-cut processing, washing with a sanitizing agent and packing with plastic-film processing are needed, and low-temperature storage is necessary. The consumer need and demand for fresh-cut melon are growing, but preserving the quality of fresh-cut melon is more challenging than preserving the quality of the whole fruit.