• 한국기계가공학회지
• /
• 제11권1호
• /
• pp.26-32
• /
• 2012

Polishing is one of the important methods in manufacturing of Si wafers and in thinning of completed device wafers. This study will report the characteristic of wafer according to processing time, machining speed and pressure which have major influence on the abrasion of Si wafer polishing. It is possible to evaluation of wafer abrasion by load cell and infrared temperature sensor. The characteristic of wafer surface according to processing condition is selected to use a result data that measure a pressure, machining speed, and the processing time. This result is appeared by the characteristic of wafer surface in machining condition. Through that, the study cans evaluation a wafer characteristic in variable machining condition. It is important to obtain optimal condition. Thus the optimum condition selection of ultra precision Si wafer polishing using load cell and infrared temperature sensor. To evaluate each machining factor, use a data through each sensor. That evaluation of abrasion according to variety condition is selected to use a result data that measure a pressure, machining speed, and the processing time. And optimum condition is selected by this result.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2003년도 추계학술발표회 논문집
• /
• pp.75-80
• /
• 2003

Most of the control point surveying use a triangulation point and a bench mark with Total Station and Level. nowadays, the research is being accomplished for practical use of GPS. but In this study the optimum time and the optimum occupation time are analyzed, so as to examine possibility of the control point surveying that use GPS continuous station data of National Geography Institute. Also, The efficient surveying methods that compare the result of data that processed using broadcast ephemeris with the result of data that processed using precise ephemeris. As a result of that, Error feature analysis of the control point surveying in connection with GPS continuous observation will provide us estimation of errors and efficient topography information acquisition

• 연구논문집
• /
• 통권29호
• /
• pp.185-194
• /
• 1999

The shape and thickness distribution according to the pressure-time curve were carried out using the FEM and experiment. Also, mechanical properties were investigated. The square cup parts have been formed with pressure-time curve generated by result of analysis. The tensile strength and elongation have been investigated according to applied pressure conditions using the tensile test specimen obtained from the superplastic formed cup. We can use to predict the shape of formed part under the applied pressure using the FEM analysis. In the case of optimum pressure condition, the thickness distribution and mechanical properties were improved. From this study, we can find the important of optimum pressure-time condition. We have investigated about the forming of airplane part and fuel tank for motorcycle. If the applied load used in boundary conditions was appropriate, the simulation result coincides with the formed part. However, it is very difficult to define the pressure condition in complicated shape. Thus, it is need to develop the optimum pressure condition for superplastic forming.

• 한국생산제조학회지
• /
• 제18권4호
• /
• pp.417-422
• /
• 2009

The injection mold cooling circuit optimization was studied with a response surface method in the previous research. It took so much time to find an optimum solution for a large product due to an extensive amount of calculation time for the CAE analysis. In order to use the optimization technique in the actual design process, the calculation time should be much reduced. In this study, we tried to reduce the number of design variables with the concept of the close relationship between the depth and the distance of cooling channel. The optimum ratio of the distance to the depth of cooling channels for a 2-dimensional problem was 2.0 so that the optimum ratio was again sought out for 4 large automotive parts. Therefore, the number of design variables for the cooling circuit optimization can be reduced in half, resulting in much faster running time for the optimization as a design tool.

• 대한산업공학회지
• /
• 제24권3호
• /
• pp.367-379
• /
• 1998

This paper considers two modes of partially accelerated life tests for items having Weibull lifetime distributions. In a use-to-acclerated mode each item is first run at use condition and, if it does not fail for a specified time, then it is run at accelerated condition until a predetermined censoring time. In an accelerated-to-use mode each one is first run at accelerated condition and, if it does not fail for a specified time, then it is run at use condition. Maximum likelihood estimators of the parameters of the lifetime distribution at use condition, and the 'acceleration factor' are obtained. The stress change time for each mode is determined to minimize the asymptotic variance of the acceleration factor, and the two modes are compared. For selected values of the design parameters the optimum plans are obtained, and the effects of the incorrect pre-estimates of the design parameters are investigated. Minimizing the generalized asymptotic variance of the estimators of the model parameters is also considered as an optimality criterion.

• 대한조선학회논문집
• /
• 제31권4호
• /
• pp.147-156
• /
• 1994

선체의 구조설계는 최적화 방법을 이용하여 상당히 오래 전부터 최적 구조설계 방법을 사용해 오고 있었으나, 대부분의 경우, 설계변수(設計變數)를 연속적인 실수(實數)로 가정하여 최적해를 구하거나, 아니면 실수(實數)와 정수(整數)가 혼합된 문제에 대해서는 뚜렷한 해결 방안을 제시하지 못하고 있는 실정이다. 특히 최적해의 국부(局部) 최적성 내지는 이산적(離散的) 변수 특성이 있는 최적설계 문제에 대해서는 몇개의 초기치를 사용하여 얻어진 최적해를 상호 비교하여 주어진 문제의 전체적(全體的) 최적해를 구하고자 하였다. 많은 경우 이러한 방법은 확실한 대안이 되지 못하고 본질적인 문제점은 미해결로서 남아 있어 왔다. 그래서 본 연구에서는 생물의 진화 법칙을 모사한 유전적(遺傳的) 알고리즘을 이용하여 선체 구조물의 최적설계시 고려해야 하는 보강재의 갯수를 정수(整數)로 취급하는 문제라든지 판 두께와 같이 이산적(離散的) 특성을 갖는 설계변수 문제 등(等)이 최적설계에 미치는 영향을 검토하여 보다 일반적인 최적화 방법으로서 유전적(遺傳的) 알고리즘의 유용성을 확인하였다.

• 펄프종이기술
• /
• 제40권1호
• /
• pp.41-46
• /
• 2008

In this study, dewaterability, one of the important properties of wastewater sludge, was investigated using a simple capillary suction time (CST) measurement method. It turned out that one could use the results of CST to find optimum flocculants ratio to improve drainage in wastewater treatment for the printing paper, tissue paper, and newsprint paper mill. Since the optimum ratio of flocculants could be determined with the value of CST, COD removal efficiency could be improved and optimum floc strength could be achieved with precise ratio of flocculants. It was thus that using CST for determining the optimum ratio of flocculants could be economical by reducing the amount of flocculants. Dewaterability could be measured within several seconds using the values of CST in a precise way. The dewaterability could also be useful in investigating the optimum ratio of flocculants.

• 한국식생활문화학회지
• /
• 제9권1호
• /
• pp.87-93
• /
• 1994

This study was conducted to present a method that determine the optimum conditions for the preparation of chinese whole cabbage kimchi. After Sensory and chemical characteristics of kimchi with various salt concentration in brine, brining time and storage period at equal saltiness were measured, the optimum conditions for the preparation of chinese whole cabbage kimchi were determined with the use of the response surface methodology. The results are summarized as follows; 1. The more salt concentration in brine, the longer brining time and storage period, resulted in the lower pH and the higher titratable acidity of kimchis. As the salt concentration in brine and brining time increased, kimchi reaches at optimum titratable acidity of it within a shorter time. 2. As the salt concentration in brine and brining time increased, content of succinic acid decreased but that of lactic, acetic, and propionic acid increased. Amount of citric, malic and succinic acid decreased but that of lactic, acetic acid increased, with storage day. 3. Sensory data showed that firmness and green cabbage flavor of kimchi decreased while toughness, carbonic mouthfeel, sourness and staled flavor increased with increased salt concentration in brine, brining time and storage day. As the storage period increased, crispness of kimchi decreased. 4. The optimum conditions for the preparation of chinese whole cabbage kimchi were as follows: Optimum salt concentration in brine, brining time, and storage period were 19.5%, 3 hours and 45 minutes, and 12 hours.

• Journal of the Korean Data and Information Science Society
• /
• 제17권3호
• /
• pp.945-952
• /
• 2006

Several accelerated life test plans use tests at only two levels of stress and thus, have practical limitations. They highly depend upon the assumption of a linear relationship between stress and time-to-failure and use only two extreme stresses that can cause irrelevant failure modes. Thus 3-level stress plans are preferable. When the lifetime distribution of test unit is exponential with mean lifetime $\theta_i$ at stress $x_i$, i=0, 1, 2, 3, we derive the optimum quadratic plan under the assumption that a quadratic relationship exists between stress and log(mean lifetime), and propose the compound linear plans, as an alternative to the optimum quadratic plan. The proposed compound linear plan is better than two other compromise plans for constant stress testing and nearly as good as the optimum quadratic plan, and has the advantage of simplicity.

• Journal of Forest and Environmental Science
• /
• 제30권1호
• /
• pp.85-90
• /
• 2014

Dewaterability, one of the important properties of wastewater sludge, was investigated using a simple capillary suction time (CST) measurement method. CST and SRF have a very close co-relation. It was convinced that CST method was quite effective, and compensating the time-consuming SRF of conventional drainage measuring method. It turned out that one could use the results of CST to find optimum flocculants ratio to improve drainage in wastewater treatment for the tissue paper production at a mill. Since the optimum ratio of flocculants could be determined with the value of CST and COD removal efficiency could be improved with precise ratio of flocculants. Thus, using CST for determining the optimum ratio of flocculants could be economical by reducing the amount of flocculants. Dewaterability might be measured within several seconds using the values of CST in a precise way. The dewaterability could also be useful in investigating the optimum ratio of flocculants.