• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.1126-1131
• /
• 2006

This study is part of the project that develops the permeable preactive barrier to be applied in a landfill. The geotechnical applicability of the permeable preactive barrier that filters the leachate from the landfill was evaluated. Dry specimens were made using a mixture of sand, loess and bentonite. A series of experiments are performed to determine the unconfined compressive strength and permeability of various mixing ratio of bentonite, loess, and sand. The laboratory test indicate that the optimum-mixing ratio that satisfied the regulation of unconfined compressive strength(490kPa) and coefficient of permeability$(10^{-3}\sim10^{-4}cm/s)$ of the landfill was when the ratio of sand and loess was 8:2 with bentonite content of 2%. The permeable preactive barrier is different from an impermeable barrier in that it permits a limited diffusion of the leachate, which will be directly purified biologically and chemically in the landfill.

• 자원리싸이클링
• /
• 제10권6호
• /
• pp.35-42
• /
• 2001

Air table을 이용해서, 입상플라스틱 혼합물로부터 PVC를 제거 분리하는 연구를 행하였다. Air table상에서 플라스틱이 어떠한 운동을 하는가 연구하고, PVC 10%와 PE 90%의 인공흔합물을 가지고 선별 분리시험을 행하였다. 이 연구로부터 선별 최적조건은, 9.2 Hz의 Frequency, 1.05 m/sec의 바람속도, 7.5 End-slope, 1 side-slope, 450 g/min의 Feeding speed 등이었다 PE-PVC 흔합물에서 99.96%의 PE를 98.9% 얻을 수 있었고, 88.7%의 PVC를 99.6% 얻을 수 있었다.

• 한국식품조리과학회지
• /
• 제22권2호
• /
• pp.164-172
• /
• 2006

The purpose of this study was to find the optimal mixing condition of three different amounts of pine leaf powder, butter and sugar for preparation of pine leaf cookies. The optimum mixing condition for pine leaf cookies was optimized by response surface methodology The optimum mixing rates of pine leaf powder, butter and sugar were 8.6 g, 252.8 g and 154.1 g for color, 8.4 g, 240.7 g and 149.8 g for appearance, 8.8 g, 246.5 g and 154.7 g for flavor and 10.9 g, 277.1 g and 134.6 g for texture respectively. The optimum mixture ratio which fulfilled all items was pine leaf powder 9.4 g, butter 270.5 g and sugar 141 g.

• Macromolecular Research
• /
• 제17권1호
• /
• pp.44-50
• /
• 2009

Rigid polyurethane foams (PUF)s were synthesized with environmentally friendly blowing agents such as a cyclopentane/distilled water (10.0/1.0, pphp) mixture and distilled water only for four different silicone surfactants having different silicone/polyether ratios. An attempt was made to reduce the thermal conductivities of the PUF samples by varying the concentration and the silicone/polyether ratio of the various silicone surfactants. The scanning electron microscopy (SEM) results indicated an optimum concentration of the silicone surfactant of about 1.5 to 2.5 phpp for various surfactants to reduce the cell size and lower the thermal conductivity. The silicone surfactant having a higher silicone/polymer ratio showed a smaller cell size and, therefore, demonstrated the lower thermal conductivity of the PUF samples. From the relation between the thermal conductivity and the cell size of the PUF samples, the smaller cell size improved the thermal insulation property of the rigid PUF for both the PUF samples blown by the cyclopentane/distilled water (10.0/1.0, pphp) mixture and distilled water only. If the blowing agent is fixed, then the cell size is an important factor to decrease the thermal conductivity of the PUF samples. These results indicated that rigid PUF samples having lower thermal conductivity can be obtained by choosing a silicone surfactant containing a higher silicone/polyether ratio, as well as an optimum content of the surfactant.

• Journal of Mechanical Science and Technology
• /
• 제16권10호
• /
• pp.1336-1345
• /
• 2002

A triboelectrostatic separation system using a fluidized bed tribocharger for the removal of PVC material in the mixture of PVC/PS plastics is designed and evaluated as a function of electric field strength, air flow rate, and the mixing ratio of two-component mixed plastics. It consists of a fluidized-bed tribocharger, a separation chamber, a collection chamber and a controller. PVC and PS particles can be imparted negative and positive surface charges, respectively, due to the difference in the work function values of plastics suspended in the fluidized-bed tribocharger, and can be separated by passing them through an external electric field. Experimental results show that separation efficiency is strongly dependent on the electric Deld strength and particle mixing ratio. In the optimum conditions of 150 Ipm air flow rate and 2.6 kV/cm electric field strength a highly concentrated PVC (99.1%) can be recovered with a yield of more than 99.2% from the mixture of PVC and PS materials for a single stage of processing.

• 한국축산식품학회지
• /
• 제37권6호
• /
• pp.813-822
• /
• 2017

The aim of this study was to prepare diacylglycerol (DAG) by enzymatic glycerolysis of lard. The effects of reaction parameters such as lipase type, reaction temperature, enzyme amount, substrate molar ratio (lard/glycerol), reaction time, and magnetic stirring speed were investigated. Lipozyme RMIM was found to be a more active biocatalyst than Novozym 435, and the optimal reaction conditions were 14:100 (W/W) of enzyme to lard substrate ratio, 1:1 of lard to glycerol molar ratio, and 500 rpm magnetic stirring speed. The reaction mixture was first incubated at $65^{\circ}C$ for 2 h and then transferred to $45^{\circ}C$ for 8 h. At the optimum reaction conditions, the conversion rate of triacylglycerol (TAG) and the content of DAG in the reaction mixture reached 76.26% and 61.76%, respectively, and the DAG content in purified glycerolized lard was 82.03% by molecular distillation. The distribution of fatty acids and Fourier transform infrared spectra in glycerolized lard samples were similar to those in lard samples. The results revealed that enzymatic glycerolysis and molecular distillation can be used to prepare more highly purified DAG from lard.

• 한국도로학회논문집
• /
• 제15권4호
• /
• pp.107-116
• /
• 2013

PURPOSES: The liquid-type chemical warm-mix asphalt (WMA) additive has been developed. This study evaluates the basic properties of the additive and the mechanical properties of WMA asphalt and mixture manufactured by using the newly developed chemical additive. METHODS: First, the newly developed WMA additive was applied to the original asphalt by various composition of additive components and dosage ratio of additive. These WMA asphalt binders were evaluated in terms of penetration, softening point, rotational viscosity, and PG grade. Based on the binder test results, one best candidate was chosen to apply to the mixture and then the mechanical properties of WMA mixture were evaluated for moisture susceptibility, dynamic modulus, and rutting and fatigue resistance. RESULTS : According to the binder test, WMA asphalt binders showed the similar properties to the original asphalt binder except the penetraion index of WMA additive was a little higher than original binder. From the Superpave mix design, the optimum asphalt content and volumetric properties of WMA mixture were almost the same with those of hot mix asphalt (HMA) mixture even though the production and compaction temperatures were $30^{\circ}C$ lower for the WMA mixture. From the first set of performance evaluation, it was found that the WMA mixture would have some problem in moisture susceptibility. The additive was modified to improve the resistance to moisture and the second set of performance evaluation showed that the WMA mixture with modified chemical additive would have the similar performance to HMA mixture. CONCLUSIONS : Based on the various laboratory tests, it was concluded that the newly developed chemical WMA additve could be successfully used to produce the WMA mixture with the comparable performance to the HMA mixture. These laboratory evaluations should be confirmed by applying this additive to the field and monitoring the long-term performance of the pavement, which are scheduled in the near future.

• 한국식품과학회지
• /
• 제31권6호
• /
• pp.1563-1569
• /
• 1999

본 연구는 분무건조를 이용한 향기성분의 미세캡슐화를 위해 maltodextrin(MD), gum arabic(GA),alkenylsuccinated modified starch(MS), gellan gum을 피복물질로 사용하여 배합비율을 최적화하는데 목표를 갖고 수행되었다. 핵물질은 특성이 다른 5종류의 향기성분을 채종유와 1 : 4의 비율로 혼합한 flavor model system으로 사용하였다. 예비실험을 통해 핵물질 : 피복물질의 비율을 1 : 4로 하였으며, MD함량은 30%로 고정하였다. GA : MS를 $2\;:\;8{\sim}8\;:\;2$의 비율로 제조하여 유화액에서의 특성을 분석한 결과, GA : MS = 4 : 6에서 유화안정성이 우수하였으며, flavor release가 가장 적었다 이 비율에 gellan gum을 $1{\sim}5%$ 첨가하여 실험한 결과, 4% 첨가한 것이 결과가 가장 우수하였다. 이상의 결과로 MD : GA : MS : gellan gum = 30 : 26.4 : 37.6 : 4의 배합비율이 분무건조를 이용한 향기성분의 미세캡슐화를 위한 피복물질의 최적 배합조건이었다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2017년도 춘계공동학술대회
• /
• pp.101-101
• /
• 2017

Beta-glucan is a polymerized polysaccharide on beta-1,3 chemical bonds. It has the main pharmacological action of various anticancer mushrooms and is colorless and odorless. In addition, it enhances phagocytosis of macrophages against mycobacterium tuberculosism and increases resistance of host against food poisoning bacteria. Owing to these advantages, beta-glucan was used in various health supplement foods such as immune boosters, hypotensive agent and hypoglycemic agent. Our study was aimed to investigate the effective components of beta-glucan, which was optimized via the contents of Sarcodon aspratus and rice bran. First, the mixture ratio condition of Sarcodon aspratus and rice bran were respectively 10:0, 7:3, 5:5, 3:7, and 0:10. The raw materials were fabricated using hot water extraction method. Distilled water of 100 mL was added to the raw material and extracted. After the extraction processed, the content of effective components was analyzed. The absorbance of beta-glucan was measured using a beta-glucan kit (Megazyme, (1-3) (1-4) BETA-D-GLUCAN ASSAY KIT). The absorbance analysis was repeated three times for accurate analysis. After the extracts were lyophilized, the yields of extracted raw materials according to the mixture ratio conditions of Sarcodon aspratus and rice bran (10:0, 7:3, 5:5, 3:7, and 0:10) were respectively 33.1%, 34.5%, 35.3%, 30.7%, and 24.3%. The absorbance was 1.52, 1.47, 1.50, 1.79, and 1.56, respectively. As a result, the optimum ratio of beta-glucan is 3:7 at Sarcodon aspratus and rice bran. This study suggested that the optimal amount of beta-glucan could be used as a health supplement foods and food additive such as immune boosters, hypotensive agent and hypoglycemic agent. However, the new condition (temperature, time) of hot water extraction to maximize the content of beta-glucan could be considered, could be necessary to compare with the existing extracts.

• 한국수산과학회지
• /
• 제50권6호
• /
• pp.721-730
• /
• 2017

This study determined the optimal mixing ratio of functional materials to enhance the functionality of batter for fish cutlets. An optimal mixing ratio of the hiziki Hizikia fusiformis, fig fruit Ficus carica L. and pear Pyrus pyrifolia Niitaka extracts (HFP extract) of 3:1:1 was found. The physicochemical properties of the mixture were as follows: total phelonic contents of $1187.29{\pm}41.55mg/L$, 1,1-diphenyl-2-picryhydrazyl (DPPH) radical scavenging activity of $61.50{\pm}2.33%$, ascorbic acid content of $23.68{\pm}0.02g/100g$, ${\beta}-carotene$ content of $51{\pm}3.92{\mu}g/100g$, and sugar content of $12.7{\pm}0.1Brix^{\circ}$. A mixture of the extract, Korean herbal powder, and wheat flour was prepared as the fish cutlet batter. The fish cutlet prepared with the batter had a hardness of $166-202g/cm^2$ and Hunter's color scale values L of $31.14{\pm}2.1$ to $34.62{\pm}1.3$, a of $-4.89{\pm}0.21$ to $-2.26{\pm}0.19$ and b of $-20.65{\pm}2.65$ to $28.93{\pm}3.14$. The FRAP (ferric reducing antioxidant power) and VBN (volatile basic nitrogen) of the fish cutlets were measured to evaluate functionality and determine the optimal mixing ratio for cold storage at $-12^{\circ}C$, $-18^{\circ}C$, and $-24^{\circ}C$. The optimum mixture ratio of extracts /Korean herbal powder/ wheat flour was 1:6:3.