• Food Science and Biotechnology
• /
• v.17 no.5
• /
• pp.904-911
• /
• 2008

Covalent cross-links between a number of proteins and peptides explain why transglutaminase may be widely used by food processing industries. The objective of this work was optimization of the fermentation process to produce transglutaminase from a new microbial source, the Streptomyces sp. P20. The strategy adopted to modify the usual literature media was: (1) fractional factorial design (FFD) to elucidate the key medium ingredients, (2) central composite design (CCD) to optimise the concentration of the key components. Optimization of the medium resulted in not only an 86% increase in microbial transglutaminase activity as compared to the media cited in the literature, but also a reduction in the production cost. Optimal fermentation conditions - namely temperature and agitation rate - were also studied, using CCD methodology. Usual conditions of $30^{\circ}C$ and 100 rpm were within the optimal area. All other parameters for enzyme production were experimentally proven to be optimum fermentation conditions.

• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.1
• /
• pp.3-7
• /
• 2005

In the present study a feasibility of a novel filtration process using synthetic for secondary effluent reclamation was investigated. Polyurethane was chosen as a filter medium among tested three media. Compressibility and up-flow velocity were changed to determine the optimum operation for the system. An equation was introduced to express the relationship between the removal efficiency and up-flow velocity. In pilot study, the synthetic medium filtration with compression showed very stable effluent quality without clogging trouble, though the system operated with 3 times higher filtration rate and much longer backwashing interval than conventional systems.

• Journal of Plant Biotechnology
• /
• v.8 no.1
• /
• pp.15-19
• /
• 2006

An efficient protocol for in vitro multiple shoot bud induction and plant regeneration from mature green cotyledon derived callus tissues of Acacia sinuata has been developed. Callus formation occurs at all the concentrations of thidiazuron (TDZ) in Murashige and Skoog's (MS) medium, but 0.6 ${\mu}M$ proved to be the best with maximum callus formation frequency. Supplementation of TDZ in combination with indole-acetic acid (IAA) in MS media accelerates shoot bud organogenesis in differentiating callus tissues with 60-70% conversion of shoot buds into shoot Most efficient shoot organogenesis was recorded when TDZ induced calli were subcultured at different concentrations of 6-benzyla-denine (BA). Optimum shoot bud induction and plant regeneration from callus was achieved when 0.6 ${\mu}M$ (TDZ) induced calli were subcultured at 3.0 ${\mu}M$ (BA) where $16.6{\pm}0.74$ shoots/unit callus on obtained. Rooting in in vitro differentiated shoots was achieved when transferred to medium containing different concentration of indole-3-butyric acid (IBA) in full & half strength MS medium. The well rooted plantlets were hardened and transferred to net house with 90% survival rate.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.2
• /
• pp.125-129
• /
• 2001

Eight vermiculite-based root media prepared with addition of complete fertilizer (2 g/L; N-$P_2$$O_5$-$K_2$O, 10-10-14) for potatoes (Solanum tuberosum L.) and a commercial root medium were evaluated in 2000 to develop the root media suitable for potato plug seedling production. The eight media consisted of various ratios of vermiculite, perlite, peatmoss, and compost. In addition, four rates (0, 1, 2, or 4 g/L) of the complex fertilizer for potato were added to a root medium (70% vermiculite, 10% perlite, 10% peat moss, and 10% compost by volume) to determine the optimum addition rate of the complex fertilizer for plug seedlings. Compost addition to the media increased plant height, the number of leaves per plant, and top and root fresh weight of 15-day old plug seedlings. The seedlings raised in root media containing compost produced significantly higher total tuber yield. Addition of the complex fertilizer to root media enhanced seedling growth and increased the number of tubers per plant and tuber yields. The results suggest that root media containing 50% vermiculite, 0 to 20% peat moss, 10% perlite, 20 to 40% compost, and 2 g/L complex fertilizer for potato appear suitable for potato plug seedling production.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.6
• /
• pp.1327-1332
• /
• 2004

The hemA gene encoding 5-aminolevulinic acid synthase (ALAS) was cloned from Rhodobacter capsulatus, and its nucleotide sequence was determined. DNA sequencing data revealed one open reading frame coding for a protein with 401 amino acids that displayed high similarity to the amino acid sequences of other known ALASs. The hemA gene was then cloned and expressed under the control of constitutive promotor in E. coli. The recombinant E. coli strain was able to accumulate 5-aminolevulinic acid to 21 mM in the liquid medium supplemented with 45 mM glycine and 120 mM succinate. In addition, a marked effect of the pH of the culture medium on ALA production was observed, and the optimum pH for culture medium was determined to be 5.8-6.3.

• Journal of Microbiology and Biotechnology
• /
• v.4 no.1
• /
• pp.49-55
• /
• 1994

A fungal strain capable of producing extracellular cellulase was isolated from farmland. It was identified as Aspergillus niger, and named Aspergillus niger KKS. Production of cellulase and xylanase by the A. niger KKS was studied through a shake-flask culture. The effects of culture conditions such as inoculum size, temperature, pH, and medium composition on the cellulase and xylanase production were examined. The optimum temperature and pH for the enzyme production were $30^{\circ}C$ and pH 7.0, respectively. The optimized medium was composed of 2.0% (w/v) rice straw, 0.5% (w/v) proteose peptone, 0.5% (w/v) $KH_2 PO_4$, 0.05% (w/v) yeast extract, 0.01% (w/v) $CoSO_4 \cdot 7H_2O$, and 0.05% (w/v) $CuSO$_4$\cdot 5H_2O$. When the strain was incubated with the optimized medium, it gave the activities of endoglucanase, $\beta$-glucosidase, $\beta$-xylosidase, xylanase were 3.80, 4.20, 4.00, 80.0 (IU/mL), respectively. Filter paper and cotton activities were 0.68 and 0.045 (IU/mL), respectively. The results of this study show that A. niger KKS is a potential organism with a wide spectrum of enzyme activities, such as those of $\beta$-glucosidase, $\beta$-xylosidase, and xylanase.

• Journal of the Korea Furniture Society
• /
• v.18 no.1
• /
• pp.13-19
• /
• 2007

The influences of coating on oak veneer overlaid Medium Density Fiberboard (MDF) were evaluated. The hardness of 9mm-MDF by hardness test were increased about 28% with coating on MDF and the more increased hardness of 31% with oak veneer overlaid MDF. The hardness of veneer overlaid MDF increased with increment of the veneer thickness and that of overlaid MDF showed the higher hardness compared to non-overlaid MDF. The optimum moisture content in terms of the hardness of panels MDF was in the range of 7% to 10% and the hardness was decreased with increasing of the moisture content. Any cracks were not overlaid coated on the MDF but the cracks were observed on the overlaid MDF after Soak under Vacuum Dry 10-cycle. The thicker veneer-overlaid MDF showed more cracks.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.776-781
• /
• 2001

To enhance thermal efficiency of thermal facility through recovery of low and medium temperature waste heat, 1MW organic Rankine cycle system was designed and developed. The exhaust gases of $175^{\circ}C$ at two 100MW power plants in pohang steel works were selected as the representative of low and medium temperature waste heat in industrial process for the heat source of the organic Rankine cycle system. HCFC-123, a kind of harmless refrigerant, was chosen as the working fluid for Rankine cycle. The organic Rankine cycle system with selected exhaust gases and working fluid was designed and constructed. From the operation, it was confirmed that the organic Rankine cycle system is available for low and medium temperature waste heat recovery in industrial process. The optimum operating manuals, such as heat-up of hot water, turbine start-up, and the process of electric power generation, were derived. However, electric power generated was not 1MW as designed but only 670kW. It is due to deficiency of pump capacity for supply of HCFC-123. So it is necessary to increase the pump capacity or to decrease the pressure loss in pipe for more improved HCFC-123 supply.

• Korean Journal of Plant Tissue Culture
• /
• v.22 no.6
• /
• pp.311-316
• /
• 1995

In an attempt to obtain intersubgeneric somatic hybrids of Pelargonium aridum and P.zonale, protoplast isolated from the two species were fused by using polyethylene glycol(PEG) and electorfusion methods. Protoplast were isolated from cotyledon and leaf tissues using MS medium containing 550 mM sucrose, 0.7% cellulase (Onozuka R-10) and 0.4% Macerozyme. The optimum number of protoplasts per mL of culture medium was 6 x 10$^4$. Protoplast fused by the electrofusion method were more active than by PEG method. Heterokaryotically fused protoplasts formed calli when cultured in MS medium containing 550 mM glucose, 1 to 2 mg/L NAA and 0.5 to 1 mg/L BA.

• The Korean Journal of Mycology
• /
• v.8 no.1
• /
• pp.63-68
• /
• 1980

${\beta}-Lactamase$ was isolated from the culture filtrate of the penicillin producing strain, Penicillium chrysogenum Q176. When the pH of the medium was adjusted to 5.0 at the start of culture, a rapid increase in pH accompanied by the synthesis of penicillin was observed in the first $2{\sim}4$ days. When the pH of medium was brought to 6.0 or 7.0 the opposite was observed: high yield of the enzyme and little of the antibiotics in the medium. The optimum enzyme activi­ty was at a temperature of $40^{\circ}C$ and around pH 7.0. A partially purified enzyme was assayed on several different substrates including penicillins V and G, 6-aminopenicillanic acid, cephalospo­rin C. The V max values calculated were 24.5, 20.4, 7.6, and 6.1 mmoles/hour, and the $K_m$, values were 16.4, 12.6, 7.5, and 6.9 mM in the order given.