• 한국건축시공학회지
• /
• 제16권3호
• /
• pp.201-209
• /
• 2016

본 연구에서는 천연섬유인 KN섬유를 섬유보강 콘크리트에 사용하기 위한 방안으로, KN섬유의 혼입량 및 유기질 섬유보강재 종류에 따른 콘크리트의 공학적 특성을 실험적으로 확인하였다. 이러한 연구를 위하여 KN섬유의 혼입량 4종류(0, 0.3, 0.6 및 $0.9kg/m^3$) 및 비교용 섬유보강재(JT, CEL, PP 및 NY섬유) 4종류를 대상으로 슬럼프, 공기량, 소성수축 시험 및 압축강도, 인장강도, 휨강도, 그리고 건조 수축량, 탄산화 깊이 등을 실험하였다. 실험결과, KN섬유의 혼입량 $0.6kg/m^3$일 때, 인장강도 및 휨강도 증진에 매우 효과적이며, 소성수축 균열 및 건조수축량 저감, 탄산화 깊이에도 큰 효과가 있는 것으로 나타났다. 또한, 동일한 혼입량($0.6kg/m^3$)을 사용한 유기질 섬유보강재와의 비교실험에서 탄산화 깊이를 제외한 인장강도 및 휨강도, 소성수축 균열 및 건조수축량 저감 등에 KN섬유가 우수한 것으로 나타났다. 따라서, KN섬유의 혼입량 $0.6kg/m^3$를 사용하여 섬유보강 콘크리트에 적용하는 것이 콘크리트의 성능 및 환경성, 경제성 측면에서 가장 적합한 것으로 나타났으며, 향후 현장적용성에 대한 지속적인 연구가 요구된다.

• 한국태양에너지학회 논문집
• /
• 제26권4호
• /
• pp.55-61
• /
• 2006

Titanium oxide ($TiO_2$) films are deposited on the indium tin oxide (ITO) substrate in an $Ar/O_2$ atmosphere by using reactive RF (Radio Frequency) magnetron sputtering technique, and Electrochromic properties and durability of $TiO_2$ films deposited at different preparation conditions are investigated by using UV-VIS spectrophotometer and cyclic voltammetry Li+ interalation/deintercalation in $TiO_2$ films shows that the electrochromic properties and durability of as-deposited films strongly depend on gas pressure $TiO_2$ films formed in our sputtering conditions are found to remain transparent, irrespective of their Li+ ion contents. The optimum sputtering conditions for film as passive counter electrode in electrochromic devices are working pressure of $1.0\;{\times}\;10^{-2}\;torr$ and oxygen flow raes of $10{\sim}15\;sccm$, respectively.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.362-365
• /
• 2009

Microstructural evolution and the mechanical properties of various carbon steels were investigated with the variation deformation temperature to explore the optimum microstructure with excellent combination of strength and ductility. For this purpose, three carbon steels containing different carbon contents were deformed using Gleeble 3500 at temperatures including austenitic, austenitic/ferritic, austenitic/cementitic, ferritic/cementitic regions. The results showed that in the medium and high carbon steels, cementite particles became finer with decreasing deformation temperature resulting higher hardness but lower ductility. Further effort is needed to find out optimum microstructures with enhanced mechanical properties.

• 한국식품저장유통학회지
• /
• 제2권2호
• /
• pp.285-291
• /
• 1995

This study was performed to investigate the optimum moisture content and the best packaging method of dried persimmons for long term storage at room temperature. The package material to be used were 0.05mm polyethylene film, Wrap film, 0.08mm LDPE film exchanged nitrogen gas, and non package for untreated control. Before the storage, the initial moisture contents of dried persimmons were treated with 40%, 35% and 30%, respectively; 40% as traditional dryness, 35% as extending dry period one more week, and 30% as for two more weeks. The best package method was 0.08mm LDPE film exchanged nitrogen gas, and the optimum moisture control was 35%

• 한국세라믹학회지
• /
• 제36권10호
• /
• pp.1123-1131
• /
• 1999

Alumina-glass composites which are considered as the material of the choice for all dental crown was prepared by aqeous-based tape casting and sintering for 2h at 1120$^{\circ}C$ followed by glass infiltration for 2h at 1100$^{\circ}C$ Biaxial strength and fracture toughness of the composites were evaluated to determine the optimum composition of the tape as a function of the amount of constituent such as alumina binder and plasticizer. The strength and the fracture toughness of the alumina tape increased with increasing the contents of alumina and binder. These observations are consistent with in fluence of the constituents on mean alumuna particle distance in tapes suggesting that high strength of the glass infiltrated alumina composites is related to toughening by crack bowing. The biaxial strength and the fracture toughness of the composite containing the optimum constituent composition were 523 MPa and 3.3 MPa$.$1/2 respectively.

• 환경생물
• /
• 제21권3호
• /
• pp.245-250
• /
• 2003

Composition of isoflavone in cotyledon and hypocotyl of soybean were detected using HPLC. Optimum conditions for extracting isoflavone from hypocotyl were studied as well. Contents of isoflavone in soybean cotyledon and hypocotyl were 482.5 mg 100 $g^{-1}$ and 3453.3 mg 100 100 $g^{-1}$, respectively. Hypocotyl contained 7~8 times move isoflavone than corresponding cotyledon of the soybean. Malonyl glycoside accounted for move than 70% of the total isoflavone, followed by glycoside, acetyl glycoside, and aglycone. Aqueous ethanol of 60~80% was the most suitable solvent for extracting isoflavone from the hypocotyl. Optimum temperature and time was $90^{\circ}C$, 1hr. Acetic acid, NaCl, and NaOH added to 80% ethanol suppressed extraction yield of the phytochemieal.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.1229-1234
• /
• 2001

The bottom slab of Inchon LNG in-ground #213 tank is designed as a massive structure witch has a large depth and section. The purpose of this study is to determine the optimum mix design having good workability and low hydration heat for bottom slab concrete and to control the actual concrete quality in site. For this purpose, we select the optimum mix design used ternary blended cement(furnace slag cement＋fly ash) and design factors. As test results of actual application, we have finish placing the bottom slab concrete of 23,180㎥ during 68hours with good success and obtain the good quality of fresh and hardened concrete including slump, air contents, no-segregation, compressive strength and low hydration heat in actual data. All test results are satisfied with our specifications for bottom slab concrete and we cut costs as the use of ternary blended cement and the reduction of placing hours.

• 한국세라믹학회지
• /
• 제30권5호
• /
• pp.347-356
• /
• 1993

In joining alumina ceramics to metal by using Mo-Mn metallizing process the effects of metallizing thickness, temperature, and the composition of paste on the bond strength and the microstructure of joining interface were investigated. The bond strength variation in the range of metallizing temperature, 1350~155$0^{\circ}C$ was more than 150MPa above 145$0^{\circ}C$ and the optimum metallizing thickness was 30${\mu}{\textrm}{m}$. The optimum contents of Mn in Mo-Mn paste was 5% due to the bond strength decrease with the increase of addition. The effect of SiO2 addition in paste on bond strength was saturated around 200MPa. It was also observed that as the particle size of Mo decreased, the joinning with higher bond strength was shown in spite of low metallizing temperature.

• The Korean Journal of Ecology
• /
• 제15권4호
• /
• pp.377-386
• /
• 1992

Seasonal changes of symbiotic nitrogen-fixation activity and growth characteristics of four different natural populations of kummerowia striata were quantitatively analyzed during the growing period. the nitrogen-fixation activity of root nodules attained the maximum rates of 148, 132, 102 and 100$\muM\;C_2H_4\;\cdot\;g\;fw\;nodule^{-1}\;\cdot\;hr^{-1}$, respectively for sunny, multibranched, shade and unibranched populations at the optimum growth conditions. and the seasonal changes showed fluctuations by environmental conditions such as light, temperature, nutrient contents, water stress and plant ages, etc. The multibranched plant showed the greater amount of leaf and root nodule biomass, and the higher nitrogenase activity than the unibranched plant. the optimum conditions of leaf chloropht11 and water content of each organ indicated the active growth and the maximum fresh biomass of 4 different populations were 1.92, 1.85, 0.97 and 0.56 g $fw\cdotplant^{-1}$ for shade multibranched, sunny and unibranched populations, respectively.

• 한국농공학회지
• /
• 제44권5호
• /
• pp.88-95
• /
• 2002

This study is a fundamental research for recycling waste vinyl (WV) in asphalt mixture for improving roadway pavement. Mix design was conducted by WV content and optimum asphalt content (OAC) was determined for dense-graded surface course mixture. Marshall stability test, indirect tensile strength (ITS) test and wheel tracking test were carried out to measure the characteristics of WV-added asphalt concretes. From the results of this study, recycling WV in asphalt mixture is possible. However, as WV content increased, melted WV clustering appeared in asphalt mixture. It could be considered that adding too much WV in asphalt mixture is not proper. The proper content of LDPE and HDPE WV was appeared to be 12% and 8%, respectively.