• Food Science and Preservation
• /
• v.14 no.4
• /
• pp.364-368
• /
• 2007

The purpose of this study was to improve the stability and the processing property of vitamin C. Vitamin C was coated according to particle size(80-100 mesh, 100-140 mesh) and mixing ratio(1:1.6, 1:2.5, 1:3(w/w)) with coating solution(8% Zein-DP, 6% HPMC-FCC), and then the quality characteristics of fluidized bed micro coated vitamin C were investigated. The coating efficiency and the thickness of coating film were higher in $80{\sim}100$ mesh particle than in $100{\sim}140$ mesh particles, and coating efficiency was decreased as the coating material was increased. The distribution range of particle was more narrow in mixing ratio of 1:3(w/w) than in the other. DPPH radical scavenging activity was not affected by the particle size and the mixing ratio. There was no difference between the coating materials in terms of the quality characteristics. The optimum coating condition for fluidized bed micro-coating of vitamin C powder was selected as the particle size of $80{\sim}100$ mesh and the mixing ratio with coating solution of 1:3(w/w).

• Food Science and Preservation
• /
• v.14 no.6
• /
• pp.598-604
• /
• 2007

Process development and standardization are necessary in maintaining high hygienicquality of side dishes. Seasoned perilla leaves are a typical side dish needing process development. In this study the optimum condition for preparing seasoned perilla leaves was investigated experimentally. The best sensory quality was established by response surface methodology. The rinsing and washing method of preparing fresh perilla leaves was optimized to decontaminate the raw material and preserve the product in chilled storage. Washing and rising with 3% salt water reduced the aerobic bacterial count of perilla leaves to 0.55 (log CFU/g), while rinsing reduced the load from 8.08 to 4.27 (log CFU/g). The effect of rinsing method was maintained during subsequent storage of the prepared seasoned leaves at $10^{\circ}C$. There was no significant quality change in the product during chilled storage at $10^{\circ}C$. Soaking in 3% salt water for 1 min, followed by rinsing with tap water, contributed positively to the microbial quality, and is proposed as the optimal preparation method.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.1
• /
• pp.32-37
• /
• 2006

Rare-earth niobates, ag (Ln = Y, La, Gd) are well-known self-activated phosphors due to charge transfer in $NbO^{3-}_4$ showing a broad and strong emission band in the spectral region around 410 nm. In order to find new blue and red phosphors for FED, $LaNbO_4$ : X (X = Bi, Eu) phosphors are prepared through solid-state reactions at high temperature. The optimum reaction condition for these phosphors to give maximum emission intensity is obtained when it is first fired at $1250^{\circ}C$ for 2 h followed by second firing at $1400^{\circ}C$ for 1 h. Under irradiation at 254 nm, $1mol\%\;Bi^{3+}$ doped $LaNbO_4$ phosphor shows strong blue emission band with a range of $420\~450nm$. Also $10mol\%\;Eu^{3+}$ doped $LaNbO_4$ phosphor shows the maximum emission intensity at about 610 nm. Emission peaks at $415\~460nm$, $530\~560nm$and $570\~620nm$are observed in phosphors below $10mol\%\;Eu^{3+}$ doped $LaNbO_4$. Similar results are obtained in cathodoluminescent property of these phosphors.

• Clean Technology
• /
• v.20 no.2
• /
• pp.179-188
• /
• 2014

The effect of desorption pressure on $CO_2/N_2$ breakthrough behaviors for 4 different adsorbents was studied at a fixed bed. Zeolite 3A, 4A, 5A, and 13X pellets were used as adsorbents. Cyclic operations were executed with varying desorption pressure from vacuum (0 bar) to 3 bar while other conditions such as adsorption step pressure (3 bar), temperature (293 K), composition ($CO_2:N_2=10:90$vol%) and flow rate (400 ccm) were fixed at constant values. Each adsorption and desorption step was set as 80 min, which totaled up to 160 min per a cycle. 5 cycles with adsorption and desorption steps were run overall. After the experiment, breakthrough time, saturation time, and adsorption amount were measured and compared in order to find an optimum adsorbent and a proper operating condition for a post combustion $CO_2$ capture process.

• Journal of Radiation Protection and Research
• /
• v.31 no.3
• /
• pp.129-134
• /
• 2006

A TL pellet for a neutron dose measurement (KCT-306) by embedding a $^6Li$-compound into a $CaSO_4:Dy$ phohphor was developed based upon the technical information of KCT-300. The KCT-300 is an another kind of $CaSO_4:Dy$ TL detector shich was developed at KAERI, in which small amounts of $NH_4H_2PO_4$ have been emvedded as a binding material. This paper presented the optimized manufacturing condition of KCT-306 and compared its sensitivity with that of the commercialized neutron TL pellets. $CaSO_4:Dy$ Phosphor with grain size ranging less than $45{\mu}m$ are used for the KCT-306. The optimum $CaSO_4:Dy$ TL phosphor, $^6Li$-compounds and P-compound as the binding material are determined as 20-40wt%, 50-70wt% and 20wt%. The TL pellet combination of our KCT-306/KCT-300, TLD-600/TLD-700 and TLD-600H/TLD-700H(Harshaw) have been irradiated in the neutron/gamma mixed fields from a $D_2O$ moderated $^{252}Cf$ neutron source. The KCT-300, TLD-700 and TLD-700H were used at the same time as gamma ray discriminators in the neutron/gamma mixed fields. It was found that the neutron/gamma response ratios of KCT-306/KCT-300, which were developed in this study, were approximately 4 times higher than those of the commercial TLD-600H/TLD-700H.

• The Korean Journal of Malacology
• /
• v.28 no.1
• /
• pp.21-28
• /
• 2012

The combined effects of water temperature and salinity on the settlement rate and density (spats/$cm^2$) of Crassostrea gigas pediveliger larvae were studied under the hatchery conditions. Four water temperatures (20.0, 23.0, 26.0 and $29.0^{\circ}C$) were tested at three salinities (20.0, 30.0 and 40.0). The optimum water temperature by salinity conditions were $29.0^{\circ}C$ and 20.0, 30.0 which significantly (P < 0.05) the highest mean (${\pm}S.D$) larval settlement rate of $43.1{\pm}0.1%$, $42.1{\pm}0.1%$, respectively. But the combination of water temperatures and salinities for settlement density was not effected, but each factor as water temperature ($29.0^{\circ}C$), salinity (40.0) was shown significantly high and low settlement density, respectively (P < 0.05). The statistics result of settlement density frequency was appeared: mode ($1.2-2.3spats/cm^2$), Mean ($1.9-2.4spats/cm^2$), Range ($3.0-5.8spats/cm^2$) and the lowest variance was obtained 0.4 at water temperature $20.0^{\circ}C$ by salinity 30.0, but $29.0^{\circ}C$ by 20.0 was the highest (1.1). The best condition at this results for the larvae setting under the artificial seed collection of C. gigas was $29.0^{\circ}C$ and 20.0-30.0.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.1
• /
• pp.11-20
• /
• 2010

Oyster production is playing an important role in domestic aquaculture, but facing some problems such as exports decrease, a slowdown in domestic demand and marine environmental deterioration. In order to obtain the suitable and sustainable oyster production, suitable sites selection is an important step in oyster aquaculture. This study was conducted to identify the suitable sites for lunging culture of oyster using Geographic Information System(GIS)-based multi-criteria evaluation methods. Most of the parameters were extracted by Inverse Distance Weighted(IDW) methods in GIS and eight parameters were grouped into two basic sub-models for oyster aquaculture, namely oyster growth sub-model(Sea Temperature, Salinity, Hydrodynamics, Chlorophyll-a) and environment sub-model(Bottom DO, TOC, Sediment AVS, Benthic Diversity). Suitability scores were ranked on a scale from 1(leased suitable) and 8(most suitable), and about 80.1% of the total potential area had the highest scores 5 and 6. These areas were shown to have the optimum condition for oyster culture in GeojeHansan Bay. This method to identify suitable sites for oyster culture may be used to develop bivalve culture management system for supporting a decision making.

• The Korean Journal of Mycology
• /
• v.31 no.3
• /
• pp.141-147
• /
• 2003

The pileus of Pleurotus cystidiosus was attached at the side and was spatular-shape. It grew to the size of $7.6{\sim}9.8\;cm$ with dark brown color. The length of stem was $1.4{\sim}2.9\;cm$. The individual weight of fruiting-body was 25.4 g in average. This study was conducted to Investigate the physiological characteristics and to develop the artificial cultivation technique of P. cystidiosus. To find out the optimum condition of mycelial growth of P. cystidiosus, physiological conditions such as media, temperature, pH carbon sources and nitrogen sources were investigated. Various cultural media were used for the cultivation of P. cystidiosus and compost dextrose agar was favorable for mycelial growth. The optimal growing temperature and pH were in range of 25 to $30^{\circ}C$, pH $7{\sim}9$, respectively. When different carbon sources were compared, glucose was found to be best. However nitrogen sources were different with each strains. When different C/N ratio were compared, 20:1 of C/N ratio was found to be best.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.19 no.1
• /
• pp.20-30
• /
• 1993

Liquid Chromatographic behavior of Pd(II) in Isonitosoethylacetoacetate imine IEAA-NR: R=H, CH3, C2H5, n-C3H7, n-C4H9, C6H5-CH2) Chelates were investigated by reversed phase high performance 1iquid chromatography on Micropak MCH-5 Column using Methanol /water as mobile phase. The optimum condition for the separation of Pd-Isonitrosoethylacetoacetate imine chelates were examined with respect to the flow rate, mobile phase strength. It was found that Pd(IEAA-NR)2 chelates were eluted in an acceptable range of the capacity factor value (0 $\leq$ log k' $\leq$ 1), The dependence of the logarithm of capacity factor(k') on the volume fraction of water in mixture with in the binary mobile phase was examined. Also, the dependence of k'on the liquid-liquid extraction distribution constant in methanol-water / n-alkane extraction system was on system was invert tigated for Pd(IEAA-NR)2. Both kinds of dependence are linear, which suggests that the retention of the electroneutral metal chelates be largely due to the solvophobic effect.

• Journal of Ginseng Research
• /
• v.27 no.2
• /
• pp.78-85
• /
• 2003

By the Agrobacterium rhizogenes A$_4$ were induced a transformed callus of ginseng hairy root and examine to find the possibility whether it can produce certain ginsenoside. Investigations for a finding out to optimal culture medium showed that BA application is better than more factorial composition between auxins and cytokinins. For the induction of hairy root callus of ginseng, l/2 MS medium containing 1 to 3 mg of benzyladenine(BA) per liter gave the best result. The growth of ginseng hairy root callus(GHC) cultured with the 1/2MS medium supplemented with 2 mg BA/L was selected for best suspension cultures. The optimum concentration of BA for ginsenosides production was found to be 2 mg/L. Probably the inoculum size of callus plays a role with the ginsenoside production in suspension culture. AS for inoculum size of callus, 50 mg was superior to 150 mg for growth and ginsenoside production. Ginsenoside contents were highest in the suspension culture grown for four weeks under continuous light condition. In fact that continous light treatment promote strongly the synthesis of ginsenoside of the hairy root callus is first result in the world and the numerously induced root hairs of the callus leads a new method for ginsenoside production.