• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.1
• /
• pp.228-236
• /
• 1997

The browning characteristic and dyeability of the mushroom were examined to establish the optimum condition for browning and extraction in the process of obtaining the natural dye, brown colorant. The composition of browning extracts from mushroom was also analyzed and the dyeability were investigated. The results of this study are as follows, 1. The optimum condition for obtaining the browning colorant from mushroom was the crushed phase of sample. 2. The browning reaction by enzymes in mushroom was efficient at a temperature of 35$^{\circ}C$, a duratron period of 2 hr and pH of 8. 3. The optimum condition for extraction of browning extracts from browned mushroom was at 95$^{\circ}C$ and Ihr. 4. To analyze the content of browning extracts in the mushroom, three fractions were obtained from gel filtration using Sephadex G-25 and the fraction 1 was melanin and the fraction 3 was dihydroxyphenylanine (DOPA) and glutaminyldihydroxybenzene (GDHB) . 5. The turbidity in enzymatic browning extraction of mushroom increased depending on refrigeration storage (4$^{\circ}C$) and UV radiation. The filtration of the extracts resulted in a decrease of absorbance. 6. The dyeability of the fraction 1 was greater compared to that of the fraction 3 and that of wool greater compared to the other two fabric materiales.

• Journal of Food Hygiene and Safety
• /
• v.10 no.3
• /
• pp.139-145
• /
• 1995

In order to develop a natural food preservative, the root bark of Morus alba was extracted with several solvents, and then antimicrobial activity was investigated. The optimum extracting condition for the antimicrobial substance from the sample, minimum inhibitory concentration (MIC) of the extracted substance against microorganisms were also examined. The antimicrobial activity of the ethanol extract form the sample was stronger than those of the extracts by the other solvents such as water, methanol. ethyl acetate and acetone. The optimum extracting condition for antimicrobial substance from the sample was shaking extraction twice for 5 hours at room temperature in case of 7 times of absolute ethanol added to the crushed root bark of Morus alba. The ethanol extract from the root bark of Morus alba had strong B. cereus, L. monocytogenes and S. aureus. Especially, Bacillus species was the most susceptible to the extracted substance. The ethanol extract showed antimicrobial activity against Gram negative bacteria(MIC, 160~1600 ug/ml) and yeasts(MIC, 1600 ug/ml) such as C. albicans and S. acidifaeciens. The extract also showed growth inhibition against molds such as A. niger, A. parasiticus, A versicolar and T. viride.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.2
• /
• pp.167-176
• /
• 1999

The study about quantitative or qualitative analysis of object using digital image is being progressed actively with the development of the image medium and image process technique. But, it is very high that the dependency about image acquisition system of high resolution for image analysis of high accuracy and it is a equipment of high-price. In this study, I extracted the optimum condition of image enhancement by analyzing and enhancing the multiple images which were acquired by system of low-price. And I carried out the analysis of 3D accuracy by being applied the optimum condition of image enhancement. In the result of analysis of average 3D positioning error using law image and enhanced image which is acquired by applying the optimum condition of image enhancement, I could obtain the progressed accuracy about 10％ on the enhanced image.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.4
• /
• pp.69-75
• /
• 1999

This study was performed to investigated the application of mixed resins for corrugated container board. The corrugated container board yields a sandwich structure in which a linerboard material is glued to a corrugated medium . Now, manufacturing corrugated container boards don't provide sufficient strength, and result in box failure during shipping . Therefore improvement of box strength is necessary . In this study, we intend to improve box strength by improving corrugated medium strength with mixed resins and to find the optimum treatment condition of this resins. First, we tried to mixed resins as Starch+CMC, Starch_Irea, CMC+Urea, Second, investigated to applicability of this resins for corrugated medium , and the third, measured tensile index, burst index, and edgewise compression index on liner, medium paper, and single faced corrugated container board. In this test results, we obtained that the improvement ratios of tensile index in liner and medium paper were approximately 80-185%, 60-118% , respectively. The respecting improvement ratios of edgewise compression index of single faced corrugated container board was approximately 91-124%, relatively. In addition, we concluded that optimum condition in mixing ratio was 1 :3 with CMC + Urea and the ap[plication amounts was 9% on materials. Fro manufacture of corrugated container board, optimum condition in mixing ratio was 1 : 3 with 5% CMC +Urea , because of considering to improvement of strength on cost.

• Journal of Environmental Health Sciences
• /
• v.32 no.5 s.92
• /
• pp.446-450
• /
• 2006

In order to treat the wastewater containing organic compound, pre-treatment system connected with MSP(molecular separation process) was investigated. With the aim of selecting an optimum process of Fenton's oxidation, removal efficiency of each process in the optimum reaction condition was recommended. The $Fe/H_{2}O_{2}$(ferric sulfate to hydrogen peroxide)reagent is referred to as the Fenton's regent, which produces hydroxyl radicals by the interaction of Fe with $H_{2}O_{2}$. The powerful oxidizing ability and extreme kinetic reactively of the hydroxyl radical was well established. Increasing dosage of $Fe/H_{2}O_{2}$ increased removal efficiency as molar ratio of $Fe/H_{2}O_{2}$ between 0.2 and 2.5. Optimum dosage of molar ratio was 1. The removal efficiency for reaction condition was increased as pH decreased when the molar ratio of $Fe/H_{2}O_{2}$ was 1.7. Fenton's oxidation was most efficient in the reaction time 35 min for complex wastewater. Also, coagulation aid experiments using kaolin resulted in 3% of kaolin dosage.

• Progress in Superconductivity and Cryogenics
• /
• v.6 no.2
• /
• pp.40-45
• /
• 2004

The experimental results of the G-M (Gifford-McMahon) type pulse tube refrigerators are presented in this paper. The pulse tube refrigerator, which has no moving parts at its cold section, is attractive in obtaining higher reliability, simpler construction, and lower vibration than any other small refrigerators. The objectives of this study are to develop the design technology of the G-M type pulse tube refrigerator and acquire its application methods for replacing G-M cryocooler. As a preliminary test, the refrigeration performances of the basic, orifice, and double inlet pulse tube refrigerators were investigated. The lowest temperature obtained in the one-stage pulse tube refrigerator was 34.4K and the refrigeration capacity at the optimum operation condition was 23W at 80K. And the lowest temperature of the second stage cold head in the two-stage pulse tube refrigerators was 18.3K and the refrigeration capacities at optimum condition were 0.45W at 20K and 20W at 80K, respectively. Finally, the lowest temperature obtained in the three-stage pulse tube refrigerator was 29.8K and the refrigeration capacity at the optimum operation condition was 1.3W for 40K and 5W for 70K.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.3
• /
• pp.159-163
• /
• 2014

More accurate CD (Critical Dimension) control is required for the nanometer-scaled devices. However, since the reflectivity between substrate and PR (Photoresist) becomes higher, the CD (Critical Dimension) swing curve was intensified. The higher reflectivity also causes PR notching due to the pattern of sub-layer. For this device requirement, it was optimized for the thickness, refractive index(n) and absorption coefficient(k) in the bottom anti-reflective coating(BARC; SiON) and photoresist with the minimum reflectivity. The computational simulated conditions, which were determined with the thickness of 33 nm, n of 1.89 and k of 0.369 as the optimum condition, were successfully applied to the experiments with no standing wave for the 0.13um-device. At this condition, the lowest reflectivity was 0.44%. This optimum condition for BARC SiON film was applied to the process for 0.13um-device. The optimum SiON film as BARC to PR and sub-layer could be formed with the accurate CD control and no standing waver for the nanometer-scaled semiconductor manufacturing process.

• ETRI Journal
• /
• v.38 no.5
• /
• pp.962-971
• /
• 2016

A wireless power transfer (WPT) system is generally designed with the optimum source and load impedance in order to achieve the maximum power transfer efficiency (PTE) at a specific coupling coefficient. Empirically or intuitively, however, it is well known that a high PTE can be attained by adjusting either the source or load impedance. In this paper, we estimate the maximum achievable PTE of WPT systems with the given load impedance, and propose the condition of source impedance for the maximum PTE. This condition can be reciprocally applied to the load impedance of a WPT system with the given source impedance. First, we review the transducer power gain of a two-port network as the PTE of the WPT system. Next, we derive two candidate conditions, the critical coupling and the optimum conditions, from the transducer power gain. Finally, we compare the two conditions carefully, and the results therefore indicate that the optimum condition is more suitable for a highly efficient WPT system with a given load impedance.

• International Journal of Reliability and Applications
• /
• v.13 no.1
• /
• pp.19-35
• /
• 2012

This paper presents an optimum design of step-stress partially accelerated life test (PALT) plan which allows the test condition to be changed from use to accelerated condition on the occurrence of fixed number of failures. Various life distribution models such as exponential, Weibull, log-logistic, Burr type-Xii, etc have been used in the literature to analyze the PALT data. The need of different life distribution models is necessitated as in the presence of a limited source of data as typically occurs with modern devices having high reliability, the use of correct life distribution model helps in preventing the choice of unnecessary and expensive planned replacements. Truncated distributions arise when sample selection is not possible in some sub-region of sample space. In this paper it is assumed that the lifetimes of the items follow Truncated Logistic distribution truncated at point zero since time to failure of an item cannot be negative. Optimum step-stress PALT plan that finds the optimal proportion of units failed at normal use condition is determined by using the D-optimality criterion. The method developed has been explained using a numerical example. Sensitivity analysis and comparative study have also been carried out.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.5
• /
• pp.108-113
• /
• 1997

In this paper, the optimum condition of (110) Si etching with the potassium hydroxide(KOH) etchant is presented. Although several researches on (110) Si anisotropic etching have been studied, there has been lack of effects of mask quality and etching conditions on the selectivity and the roughness o the etched surface. Three kinds of masks (film, emulsion and E-beam mask) were used in order to verify the effect of etching properties. Anisotropic bulk etching depends on the crystalline orientation and the concentration and temperature of the etchant. In order to investigate the effect of etching conditions on selectivity and the roughness of the etched surface, the concentration of the etchant was varied from 35 to 45 per cent in weight with increments by 5 per cent and the temperature was changed from 70 to 90$^{\circ}C$ with increments by 10$^{\circ}C$. The combination of the temperature of 70$^{\circ}C$ and the concentration of 40wt.% was found to be the optimum etching condition for high selectivity. Etched surfaces show minimum surfaces show minimum surface roughness at a temperature of 80$^{\circ}C$ and a concentation of 40wt.%. Comb structures with various comb widths were fabricated and the lengths of the combs wree measured with several etching time durations. A micro comb structure 525$\mu\textrm{m}$ high was fabricated for MEMS application.