• Food Engineering Progress
• /
• v.15 no.1
• /
• pp.56-63
• /
• 2011

Durum wheat semolina was added into wet-milled rice flour in order to improve chewy texture, firm bite ("al dente"), and resistance to overcooking of the ordinary rice noodles. Wet noodles were prepared by mixing 0 (control), 5, 10, 15, and 20% (w/w) of semolina per semolina and rice flour mixtures. Vital gluten (4%, w/w) and salt (2%, w/w) were added to form the pliable strands of wet noodles and final moisture contents of the raw mixtures were equalized at 45%. Pasting properties of the suspended flour mixtures as measured by the Rapid Visco Analyser (RVA) showed slight increases (up to $1.2^{\circ}C)$ in pasting temperatures along with the considerable decreases in peak viscosities as semolina increased at over 15%. Reduced shear thinning and retrogradation of the starch solution that leads to hardening of the cooked noodles were indicated by lowered breakdown viscosities and gaps between finaland setback viscosities from the RVA viscogram as semolina increased at over 10%. Reduced water uptake and turbidity increases of the cooking water as caused by the soluble starches from the noodle were also noted as the content of semolina increased. More or less significant (p<0.05) decreases in colorimetric L (lightness) value of the raw- and cooked noodles were observed as semolina increased while a- (redness) and b (yellowness) values were rather increased at the same moment. Textural properties of the cooked noodles such as hardness, springiness, cohesiveness, gumminess, and chewiness from TPA tests were significantly (p<0.05) influenced by added semolina, even at 5%-levels or more. It can be concluded that addition of semolina into rice flour could provide easy handling of the wet noodles without distortion during transportation, integrity and firm bite of the cooked noodles, and less loss of starch to the cooking water in comparison with the ordinary rice noodle. It was finally suggested that optimum level of the semolina in the product was approximately 10% for the quality wet rice noodle products.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.39 no.2
• /
• pp.114-120
• /
• 2019

This study was carried out to explore the accuracy of near infrared spectroscopy(NIRS) for the prediction of moisture content and chemical parameters on winter annual forage crops. A population of 2454 winter annual forages representing a wide range in chemical parameters was used in this study. Samples of forage were scanned at 1nm intervals over the wavelength range 680-2500nm and the optical data was recorded as log 1/Reflectance(log 1/R), which scanned in intact fresh condition. The spectral data were regressed against a range of chemical parameters using partial least squares(PLS) multivariate analysis in conjunction with spectral math treatments to reduced the effect of extraneous noise. The optimum calibrations were selected based on the highest coefficients of determination in cross validation($R^2$) and the lowest standard error of cross-validation(SECV). The results of this study showed that NIRS calibration model to predict the moisture contents and chemical parameters had very high degree of accuracy except for barely. The $R^2$ and SECV for integrated winter annual forages calibration were 0.99(SECV 1.59%) for moisture, 0.89(SECV 1.15%) for acid detergent fiber, 0.86(SECV 1.43%) for neutral detergent fiber, 0.93(SECV 0.61%) for crude protein, 0.90(SECV 0.45%) for crude ash, and 0.82(SECV 3.76%) for relative feed value on a dry matter(%), respectively. Results of this experiment showed the possibility of NIRS method to predict the moisture and chemical composition of winter annual forage for routine analysis method to evaluate the feed value.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.2
• /
• pp.36-49
• /
• 2019

The objectives of this study were to extract "Field Survey Based Infection Tree of Pine Wilt Disease(FSB_ITPWD)" and "Object Classification Based Infection Tree of Pine Wilt Disease(OCB_ITPWD)" from the Research Forest at Kangwon National University, and evaluate the spatial distribution characteristics and occurrence intensity of wood infested by pine wood nematode. It was found that the OCB optimum weights (OCB) were 11 for Scale, 0.1 for Shape, 0.9 for Color, 0.9 for Compactness, and 0.1 for Smoothness. The overall classification accuracy was approximately 94%, and the Kappa coefficient was 0.85, which was very high. OCB_ITPWD area is approximately 2.4ha, which is approximately 0.05% of the total area. When the stand structure, distribution characteristics, and topographic and geographic factors of OCB_ITPWD and those of FSB_ITPWD were compared, age class IV was the most abundant age class in FSB_ITPWD (approximately 55%) and OCB_ITPWD (approximately 44%) - the latter was 11% lower than the former. The diameter at breast heigh (DBH at 1.2m from the ground) results showed that (below 14cm) and (below 28cm) DBH trees were the majority (approximately 93%) in OCB_ITPWD, while medium and (more then 30cm) DBH trees were the majority (approximately 87%) in FSB_ITPWD, indicating different DBH distribution. On the other hand, the elevation distribution rate of OCB_ITPWD was mostly between 401 and 500m (approximately 30%), while that of FSB_ITPWD was mostly between 301 and 400m (approximately 45%). Additionally, the accessibility from the forest road was the highest at "100m or less" for both OCB_ITPWD (24%) and FSB_ITPWD (31%), indicating that more trees were infected when a stand was closer to a forest road with higher accessibility. OCB_ITPWD hotspots were 31 and 32 compartments, and it was highly distributed in areas with a higher age class and a higher DBH class.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.2
• /
• pp.63-69
• /
• 2019

Black-colored rice contains anthocyanin, which has an antioxidant function on the seed coat. Anthocyanin content is greatly affected by the cultivation environment, especially the average temperature during the ripening stage. Generally, low temperatures during the ripening stage increase anthocyanin content. To control the average temperature during ripening stage in the field, transplanting time has to be regulated. In this study, anthocyanin content variation was examined in relation to the transplanting time and the average temperature during the ripening stage. For the study, fourteen black-colored rice cultivars with different maturity types (four of early-maturing, five of medium-maturing, and five of medium-late maturing) were selected. The transplanting times used were May 20, June 5, June 20, and June 30. The field experiment was conducted in the Miryang, Kyoungsangnamdo province, Korea from 2014 to 2017. The anthocyanin content in all cultivars was higher when the transplanting time was delayed, and the highest anthocyanin content was observed in the transplanting on June 30. Variation in anthocyanin content according to the change in transplanting time is the greatest in the early maturing cultivars. The least change was observed in medium maturing cultivars. Regression analysis showed a significant correlation between temperature and anthocyanin content, but the degree of correlation was very low in the medium maturing cultivar. As a result, the optimal average temperature during the grain filling stage for increasing the anthocyanin content of black colored rice was $22{\sim}23^{\circ}C$. The rice yield increased in plants transplanted until June 20 and decreased thereafter owing to low temperature during the grain filling stage. The anthocyanin content increased with delaying the transplanting time up to June 30 but the rice yield decreased after June 20. Nevertheless, the rate of increase in anthocyanin content was higher than the rate of decrease in rice yield. As a result, the optimum transplanting time and an average temperature of grain filling stage for black-colored rice variety were June 30 and $23{\sim}24^{\circ}C$ considering both anthocyanin content and rice yield.

• Journal of Plant Biotechnology
• /
• v.45 no.4
• /
• pp.382-391
• /
• 2018

The objective of this study was to determine the most effective medium condition of shoot proliferation and root formation for the efficient in vitro micropropagation of M.26 (Malus pumila Mill). Simple sequence repeat (SSR) markers were used to analyze the genetic diversity of micro-propagated and greenhouse grown M.26. Shoot proliferation was carried out in MS (Murashige and Skoog) containing benzyladenin (BA, $0.5{\sim}5.0mg{\cdot}L^{-1}$) and thidiazuron (TDZ, $0.01{\sim}0.1mg{\cdot}L^{-1}$). The highest number of shoots (10.67 shoots per explant) was induced by adding BA at a concentration $1.0mg{\cdot}L^{-1}$. TDZ treatments caused higher hyperhydricity rate in cultured explants than in BA treatments. There was no significant effect of both BA and auxin on shoot proliferation, and the optimum proliferation medium for M.26 was MS medium containing $1.0mg{\cdot}L^{-1}$ BA. To find a suitable medium composition for shoot rooting, we tested different concentrations indole-3-butyric acid (IBA) and ${\alpha}$-naphthaleneacetic acid ($0.5{\sim}5.0mg{\cdot}L^{-1}$), MS medium (1/4-1), sucrose ($0{\sim}30g{\cdot}L^{-1}$). The shoots showed good rooting on half-strength MS medium containing $1.0mg{\cdot}L^{-1}$ IBA and $15-20g{\cdot}L^{-1}$ sucrose. The rooting rate (100%), number of roots (10.45 ~ 13.60 roots per explant), root length (7.41 ~ 8.33 cm), and shoot length (4.93 ~ 5.38 cm) were good on this medium. Fifteen SSR primers were detected in a total of 30 alleles in 20 micro-propagated plantlets, all SSR profiles from micro-propagated plantlets were monomorphic and similar to greenhouse grown control plantlet M.26 plant. The results indicated that M.26 micro-propagated plantlets were genetically stable.

• Korean Journal of Organic Agriculture
• /
• v.27 no.1
• /
• pp.87-100
• /
• 2019

The study was initiated to compare crop productivity as affected by a long-term application with homemade liquid fertilizers in leading organic cucumber (Cucumis sativus L.) farms in Suncheon and Kimcheon provinces. A Suncheon farm have applied an EM (effective organism) liquid fertilizer for one year and fifteen years, designating as EM 1-year and EM 15-year plots, respectively, with 4-year and 5-year application of native microbes-liquid fertilizer in Kimcheon farm, designating as Micro 4-year and Micro 5-year plots, respectively. pH in the EM-liquid fertilizer was high to approximately 7.7, and EC in the Micro-liquid fertilizer was 0.1 dS/m higher than those of EM-liquid fertilizer, with similar macro-nutrient concentrations observed in the both liquid fertilizers. Soil EC was the highest to the 10.0 dS/m for the liquid fertilizer with EM 1-year and showed less than 1.5 dS/m for other liquid fertilizer plots. Micro-liquid fertilizer plots had soil OM contents less than 20 g/kg, which was approximately two times less than those of EM plots. Soil microbial properties were not significantly different among the liquid fertilizer plots. SPAD and PS II values were significantly increased by EM 15-year plots with high levels of soil OM and EC. Liquid fertilizer plot with EM 1-year had high concentrations of T-N, Ca, and Na in the cucumber crops but low concentrations of P and Mg, in particular for low K of 1.2% which was two times less than those of desired level for an optimum cucumber growth. The lowest fruit yield was observed for the liquid fertilizer plot with EM 1-year with the highest soil EC accumulated. Liquid fertilizer plot with EM 15-year produced the expanded volume of crop canopy and increased fruit yield. Therefore, long-term of continuous application with an organic liquid fertilizer would have sustainably improved soil stability and the crop productivity.

• Journal of Life Science
• /
• v.29 no.8
• /
• pp.854-860
• /
• 2019

This study investigated the optimum pH conditions for efficient extraction of protein from defatted Tenebrio molitor (TM) larvae. We examined the anti-inflammatory effect of protein derived from defatted TM larvae obtained by an alkaline extraction method. Six extraction pH values (7, 8, 9, 10, 11, and 12) and three precipitation pH values (2, 4, and 6) were used. The protein content, browning degree, and recovery yield of the protein obtained under each pH condition were determined. For efficient extraction of protein from defatted TM larvae, a combination of an extraction pH of 9 and precipitation pH of 4 resulted in a 32.4% recovery yield based on the extraction value and degree of browning. To determine whether the protein ameliorated inflammation by inhibition of macrophage activation by lipopolysaccharides (LPS), we measured nitric oxide (NO), cyclooxygenase-2 (COX-2), and inducible nitric oxide synthase (iNOS) expression in LPS-stimulated raw 264.7 macrophage cells. The protein markedly inhibited the production of NO without cytotoxicity and reduced the expression level of COX-2 and iNOS protein through the regulation of mitogen-activated protein kinases (MAPKs) and nuclear factor kappa B ($NF-{\kappa}B$) signaling. These results suggested that protein derived from TM larvae could have potential applications in anti-inflammatory therapeutic agents and protein supplements.

• Journal of Life Science
• /
• v.29 no.8
• /
• pp.861-870
• /
• 2019

This study was undertaken to establish optimum medium compositions for cost-effective mannitol production by Leuconostoc mesenteroides SRCM201425 isolated from kimchi. L. mesenteroides SRCM21425 from kimchi was selected for efficient mannitol production based on fructose analysis and identified by its 16S rRNA gene sequence, as well as by carbohydrate fermentation pattern analysis. To enhance mannitol production by L. mesenteroides SRCM201425, the effects of carbon, nitrogen, and mineral sources on mannitol production were first determined using Plackett-Burman design (PBD). The effects of 11 variables on mannitol production were investigated of which three variables, fructose, sucrose, and peptone, were selected. In the second step, each concentration of fructose, sucrose, and peptone was optimized using a central composite design (CCD) and response surface analysis. The predicted concentrations of fructose, sucrose, and peptone were 38.68 g/l, 30 g/l, and 39.67 g/l, respectively. The mathematical response model was reliable, with a coefficient of determination of $R^2=0.9185$. Mannitol production increased 20-fold as compared with the MRS medium, corresponding to a mannitol yield 97.46% when compared to MRS supplemented with 100 g/l of fructose in flask system. Furthermore, the production in the optimized medium was cost-effective. The findings of this study can be expected to be useful in biological production for catalytic hydrogenation causing byproduct and additional production costs.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.6
• /
• pp.111-119
• /
• 2018

This study was carried out to investigate the growth characteristics and propagation methods of the Korean native Amelanchier asiatica, A. arborea, and A. alnifolia as fruit trees for gardens. Due to the lack of recent research on Amelanchier spp., their superficial classification is still unclear and the names are being used interchangeably. The results are obtained as follows : A. arborea and A. alnifolia were globular type multi-stemmed shrubs. A 20-year-old tree of A. asiatica was 7.8m in height, with a 5.2m crown width, with one trunk. As for the morphological characteristics, leaves of A. asiatica were oblong, with an acuminate of, 6.1cm and 3.6cm width, but A. arborea and A. alnifolia had acute obovate leaves. The leaf size of A. alnifolia was the largest among the three species. The flower size of A. asiatica was bigger than that of A. arborea and A. alnifolia. In addition, its petals and flower clusters were also the largest among the three species. The flowering of A. asiatica initiated on April 21 and then bloomed for a duration of 24 days in Osan, while that of A. arborea and A. alnifolia initiated flowering on April 12 and then bloomed for a duration of 22 days in the same location. The fruit of A. arborea and A. alnifolia were green on May 10~12, it changed into purplish red on May 24~26, and its matured on June 1~3. The duration of fruit persistence of A. arborea and A. alnifolia were 48~50 days. On the other hand, A. asiatica showed greenish fruit on May 20, it became red on September 4, and had fallen by October 3. The fruit size was the largest at 1.03cm of height and 1.12cm of diameter in the A. arborea, followed by the big berry of A. alnifolia and the smallest fruit in the native, A. asiatica. It was difficult to root due to the hardwood cutting of A. arborea at a 40% rate of rooting. In the softwood cutting, the rooting rate of A. arborea was increased by the treatment with concentrated IBA, especially at 5,000 and 7,000ppm. The optimum date for cutting was on June 27, when the rooting rate was more than 80%. The most effective method for rooting of A. arborea was rootone or 7,000 ppm IBA treatment on June 27 softwood cuttings, which showed a rooting rate of over 80%.

• Food Engineering Progress
• /
• v.21 no.4
• /
• pp.351-359
• /
• 2017

This study investigates the quality characteristics of dough and bread added with 6% chestnut shell powder and extruded chestnut shell powder at various conditions. As extrusion process variables, melt temperature ($110^{\circ}C$, $130^{\circ}C$, $150^{\circ}C$) and moisture (25% and 30%) were controlled. Total dietary fiber content was slightly increased in extruded chestnut shell powder group. In the farinogram, absorption was significantly increased in the group of 25% moisture content and 30% moisture content (p<0.05). After 2 hours and 3 hours, the leavening heights of dough for control showed a similar tendency to that of dough with extruded chestnut shell at a melt temperature $150^{\circ}C$ and with moisture content of 25% and 30%. Specific volume was the highest at a control of $3.74{\pm}0.08cc/g$ and extruded chestnut shell powder group was slightly higher than the chestnut shell powder group. Firmness after 1 day on control of $107.42{\pm}14.52g$ was similar to that of the bread with extruded chestnut shell at a temperature of $150^{\circ}C$ and moisture content of 25% for $113.33{\pm}6.17g$. In conclusion, the extrusion-cooking of chestnut shell powder improved the quality characteristics of dough and bread. The optimum combinations of conditions in tested range were melt temperature at $150^{\circ}C$ and moisture content at 25%, and melt temperature at $130^{\circ}C$ and moisture content at 30%.