• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.3
• /
• pp.287-293
• /
• 2009

In this study, red ginseng extract solutions were analyzed to set up the functional saponin content and quality optimization condition. The highest saponin content among the total red ginseng extracts was 64.6 mg / 100 ml which was extracted at $75^{\circ}C$ for 18 hours. In addition, the saponin content decreased according to the increased extraction temperature and time. The highest total content of $Rb_2$ and Re was 11.8 mg / 100 ml at $75^{\circ}C$ for 12 hours which decreased according to the increased extraction temperature and time. The prosapogenin content of red ginseng extract was increased at $75^{\circ}C$ and $85^{\circ}C$ while the content decreased at $95^{\circ}C$, in which the highest prosapogenin content was 34.9 mg / 100 ml at $85^{\circ}C$ for 24 hours. The total sugar content and cloudness were increased according to the increased extraction time at $95^{\circ}C$, but pH and hue value were decreased according to the increased extracted time. The highest sweetness content was 4.0% which was found at $95^{\circ}C$ for 24 hours extract. Therefore, the most appropriate red ginseng extracting method was lower the temperature for saponin content at first time in combination with raise the temperature for taste at second time.

• The Plant Pathology Journal
• /
• v.33 no.3
• /
• pp.337-344
• /
• 2017

To develop a commercial product using the mycoparasitic fungus Simplicillium lamellicola BCP, the scale-up of conidia production from a 5-l jar to a 5,000-l pilot bioreactor, optimization of the freeze-drying of the fermentation broth, and preparation of a wettable powder-type formulation were performed. Then, its disease control efficacy was evaluated against gray mold diseases of tomato and ginseng plants in field conditions. The final conidial yields of S. lamellicola BCP were $3.3{\times}10^9conidia/ml$ for a 5-l jar, $3.5{\times}10^9conidia/ml$ for a 500-l pilot vessel, and $3.1{\times}10^9conidia/ml$ for a 5,000-l pilot bioreactor. The conidial yield in the 5,000-l pilot bioreactor was comparable to that in the 5-l jar and 500-l pilot vessel. On the other hand, the highest conidial viability of 86% was obtained by the freeze-drying method using an additive combination of lactose, trehalose, soybean meal, and glycerin. Using the freeze-dried sample, a wettable powder-type formulation (active ingredient 10%; BCP-WP10) was prepared. A conidial viability of more than 50% was maintained in BCP-WP10 until 22 weeks for storage at $40^{\circ}C$. BCP-WP10 effectively suppressed the development of gray mold disease on tomato with control efficacies of 64.7% and 82.6% at 500- and 250-fold dilutions, respectively. It also reduced the incidence of gray mold on ginseng by 65.6% and 81.3% at 500- and 250-fold dilutions, respectively. The results indicated that the new microbial fungicide BCP-WP10 can be used widely to control gray mold diseases of various crops including tomato and ginseng.

• Korean Journal of Plant Tissue Culture
• /
• v.28 no.3
• /
• pp.159-164
• /
• 2001

To produce novel bioactive flavonoids, Gericudranin A and Gericudranin B, a cell culture system of Cudrania tricuspidata including callus induction and optimization of culture conditions was established. Friable calli were efficiently induced from the hypocotyl segments of seedlings on B5 medium supplemented with 1.0 mg/L NAA, 0.1 mg/L kinetin and 3% sucrose. Several factors were optimized for the Gericudranin production and the cell growth in suspension cultures. Low level of basal salt medium (1/8 MS), 1.0 mg/L IAA and 0.1 mg/L zeatin, and high level of sucrose (5%) were effective for the production of Gericudranins, whereas WPM with 1.0 mg/L NAA, 0.1 mg/L zeatin, and 5% sucrose were more effective for the cell growth. When cells were cultured on MS liquid medium supplemented with 1.0 mg/L IBA, about 2200 $\mu\textrm{g}$/g dry wt of Gericudranin A could be produced. The level might be about 10 times of the native inner bark. About 2350 $\mu\textrm{g}$/g dry wt of Gericudranin B was also produced on MS liquid medium with 5% sucrose, 1.0 mg/L NAA, 0.1 mg/L kinetin. The content was estimated about 3 times of the level of native inner bark.

• Journal of the Korean Society of Tobacco Science
• /
• v.2 no.2
• /
• pp.20-37
• /
• 1980

Among the 34 strains of Nicotinophiles selected in the previous experiments, strain NCT27 identified with Pseudomonas putida and strain NCT30 identified with Arthrobacter oxydans biotype nan thus were Investigated for optimization of growth conditions for nicotine degradation and other cultural characteristics. The compositions of optimized medium were to be following: $KH_2PO_4$ 2.Ogr, KCI 5.Ogr, $MgSO_4$.$7H_2O$ 20mg, $MnSO_4$.$6H_2O$ 0.2mg, $FeSO_4$.$7H_2O$ 1.Omg, Col$^{++}$ (Cobalt Acetate),2.O$\gamma$, N1$^{++}$ (NiSO4,6H2O) 0.5$\gamma$, and yeast extract 80mg per liter. The optimum initial concentrations of nicotine for growth were 0.4% for Pseudomonas and 0.1% for Arthrobacter, respectively. The optimum temperature and pH were 3$0^{\circ}C$ and 7.0 for both of strains. The pH of culture medium of Pseudomonas was changed from acidic condition to basic one in going from the logarithmic growth phase to the stationary growth phase. In contrast with Pseudomonas, it remained constant in case of Arthrobacter. The growth of Arthrobacter was completely inhibited in the nicotine concentration of 0.7&. However, Pseudomonas could grow even in the nicotine concentration of 1.0%. Moreover, it could grow successfully in the tobacco extract media as well as media containing carbon and nitrogen sources other than nicotine. The maximum rates of nicotine degradation were to be 1.22 gr./hr./liter for Pseudomonas and 0.186 gr./hr./liter for Arthrobacter, respectively.

• Korean Journal of Veterinary Service
• /
• v.42 no.4
• /
• pp.289-296
• /
• 2019

A novel rapid procedure with liquid chromatography tandem mass spectrometry (LC-MS/MS) detection has been developed by changing various conditions including sample preparation such as QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) methodology. This work has been involved the optimization and validation of detection method for fluoroquinolones which are widespread used in livestock especially in the chicken. Five grams of homogenized chicken muscle were extracted with QuEChERS EN and acetonitrile containing 5% formic acid and cleaned with anhydrous magnesium sulfate and C₁₈ sorbent. The separation was performed on Acquity UPLC HSS T3 (2.1 mm×100 mm, 1.8 ㎛) column. The mobile phase A and B were composed of water containing 0.1% formic acid and acetonitrile containing 0.1% formic acid, respectively. Flow rate was 0.25 mL/min and column temperate was 40℃. LC-MS/MS with multiple reaction monitoring has been optimized for ten fluoroquinolones (ciprofloxacin, danofloxacin, difloxacin, enrofloxacin, marbofloxacin, norfloxacin, ofloxacin, orbifloxacin, pefloxacin and sarafloxacin). The method developed in this study has been presented good linearity with correlation coefficient (R²) of 0.9971~0.9998. LOD and LOQ values ranged from 0.09 to 0.76 ppb and from 0.26 to 2.29 ppb, respectively. The average recoveries were from 77.46 to 111.83% at spiked levels of 10.0 and 20.0 ㎍/kg. Relative standard deviation (%) ranged 1.28~11.90% on intra-day and 3.10~8.38 % on inter-day, respectively. This analysis method was applicable to the livestock residue laboratories and was expected to be satisfactory for the residue surveillance system.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.5
• /
• pp.38-48
• /
• 2010

Adverse weather (e.g. strong winds, snow and ice) will probably appear as a more serious and frequent threat to road traffic than in clear climate. Another consequence of climate change with a natural disastrous on road traffic is respond to traffic accident more the large and high-rise bridge zone, tunnel zone, inclined plane zone and de-icing zone than any other zone, which in turn calls for continuous adaption of monitoring procedures. Accident mitigating measures against this accident category may consist of intense winter maintenance, the use of road weather information systems for data collection and early warnings, road surveillance and traffic control. While hazard from reduced road friction due to snow and ice may be eliminated by snow removal and de-icing measures, the effect of strong winds on road traffic are not easily avoided. The purpose of the study described here, was to design of amber information the relationship between traffic safety, weather, user information on road weather and driving conditions in local-scale Geographic. The most applications are the optimization of the amber information definition, improvements to road surveillance, road weather monitoring and improved accuracy of user information delivery. Also, statistics on wind gust, surface condition, vehicle category and other relevant parameters for wind induced accidents provide basis for traffic control, early warning policies and driver education for improved road safety at bad weather-exposed locations.

• KSBB Journal
• /
• v.20 no.6
• /
• pp.401-407
• /
• 2005

Optimum culture conditions and medium composition for hydrogen production by Clostridium beijerinckii KCTC 1785 were investigated. Initial pH and temperature for growth were 7.0 and $35^{\circ}C$, respectively. Agitation accelerated the hydrogen production. Although C. beijerinckii KCTC 1785 could grow up to 6%(w/v) glucose in the medium, the optimum glucose concentration for hydrogen production was 4% and hydrogen content in the biogas was 37%(v/v). However, the economical glucose concentration for hydrogen production was 1% regarding to the residual glucose which was not used in the medium. During hydrogen fermentation, acetic and butyric acid were produced simultaneously. High concentrations of acetic(>5,000 mg/L) or butyric(>3,000 mg/L) acid inhibited hydrogen production. When pH was maintained at 5.5 in the batch fermentation, 1,728 mL of hydrogen was produced from 0.5% glucose within 15 hr. $H_2$ yield was estimated to be 1.23 mol $H_2/mol$ glucose. It was found that yeast extract or tryptose in the medium was essential for hydrogen production.

• Journal of the Korean Geosynthetics Society
• /
• v.10 no.4
• /
• pp.113-121
• /
• 2011

River sand has generally used for the backfill material of underground power cables. The thermal resistivity of it has $150^{\circ}C$-cm/Watt in wet condition and more than double in dry condition. The final goal of this study is to find the backfill material which has a small change in thermal resistivity with various water contents, for example thermal resistivity is $50^{\circ}C$-cm/Watt and $100^{\circ}C$-cm/Watt in wet and dry conditions respectively. In this study it is presented that the comparison of thermal resistivity using stone powder, crush rock, weathered granite soil and Jumunjin sand as well as river sand in the needle method regarding water content, dry unit weight and particle size distribution. As a result, the thermal resistivity of a material is minimized when they have maximum dry unit weight at optimum moisture content and maximum density by appropriately mixing materials for particle size distribution. Therefore thermal resistivity characteristics should be considered two factors: one is the difference between natural dry condition and dry state after optimum moisture content, and the other is the difference between unit weight of raw material and maximum dry density.

• Fisheries and Aquatic Sciences
• /
• v.13 no.2
• /
• pp.102-111
• /
• 2010

This study was conducted to investigate the optimal conditions of collagen extraction from scales of yellowfin tuna (Thunnus albacares) using surface response methodology. Four independent variables of NaOH concentration and pretreatment fime in alkali pretreatment and enzyme concentration and treatment time in enzyme hydrolysis were used to predict a model equation for the collagen yield. The determinant coefficient ($R^2$) for the equation was 0.906. The values of the independent variables for the maximum yield were 0.32 N NaOH, 16.38 h alkali pretreatment time, 0.18% enzyme concentration, and 31.02 h enzyme treatment time. In the physicochemical properties of tuna scale collagen, sodium dodecyl sulfate-polyacrylamide gel electrophoresis of tuna scale collagen showed the same migration distances as that of calf skin collagen. The amide A, I, II, and III regions of tuna scale collagen in Fourier transform infrared measurements were shown in the peaks of 3,414 $cm^{-1}$, 1,645 $cm^{-1}$, 1,553 $cm^{-1}$, and 1,247 $cm^{-1}$, respectively. The amount of imino acids in tuna scale collagen was 18.97% and the collagen denaturation temperature was $33^{\circ}C$. The collagen solubility as a function of NaCl concentration decreased to 4% NaCl (w/v) and the collagen solubility as a function of pH was high at pH 2-4 and sharply decreased from pH 4 to pH 7. Viscosity of the collagen solution decreased continuously until $30^{\circ}C$ and this decreasing rate slowed in the temperature range of $35-50^{\circ}C$.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.4
• /
• pp.201-212
• /
• 2016

A Wind resource assessment and optimal micrositing of wind turbines were implemented for the development of an onshore wind farm of 30 MW capacity on Gadeok Island in Busan, Republic of Korea. The wind data measured by the automatic weather system (AWS) that was installed and operated in the candidate area were used, and a reliability investigation was conducted through a data quality check. The AWS data were measured for one year, and were corrected for the long term of 30 years by using the modern era retrospective analysis for research and application (MERRA) reanalysis data and a measure- correlate-predict (MCP) technique; the corrected data were used for the optimal micrositing of the wind turbines. The micrositing of the 3 MW wind turbines was conducted under 25 conditions, then the best-optimized layout was analyzed with a various wake model. When the optimization was complete, the estimated park efficiency and capacity factor were from 97.6 to 98.7 and from 37.9 to 38.3, respectively. Furthermore, the annual energy production (AEP), including wake losses, was estimated to be from 99,598.4 MWh to 100,732.9 MWh, and the area was confirmed as a highly economical location for development of a wind farm.