• KSBB Journal
• /
• v.26 no.4
• /
• pp.311-316
• /
• 2011

We investigated the optimal surface aeration rate during bioethanol production from the hydrolysate of seaweed Sargassum sagamianum using Pichia stipitis. It was observed that, when the working volume was 880 mL in 2.5-L lab-fermentor, the surface aeration rates of 30 to 100 mL/min were the optimal values for bioethanol production, in which this surface aeration rate corresponded to less than 0.05 (1/min) as the oxygen transfer rate coefficient ($k_La$). In addition, during repeated-batch operation was carried out, we examined whether those surface aeration rates were the optimal for bioethanol production. It was also observed that the surface aeration rates of 30 to 100 mL/min in the working volume of 880 mL were the optimal values in terms of the cumulative bioethanol producrion and bioethanol yield. On the basis of the oxygen transfer rate coefficient it is probable that those surface aeration rates will be applied to the large-scale bioethanol production from the hydrolysate of seaweed Sargassum sagamianum.

• KSBB Journal
• /
• v.11 no.3
• /
• pp.303-310
• /
• 1996

The marine microalga Isochrysis galbana Parke was studied to optimize its growth conditions in flask culture. Important medium components studied include nitrogen source, buffer, trace elements and vitamins. Environmental conditions include pH, temperature, light intensity, mixing extent and working volume. The medium prepared from natural sea-waters gave a higher final cell density than the medium prepared from synthetic sea-water Nitrate was a better source than ammonium. In the range of 0.4∼2mM, the final cell density was proportional to the initial nitrate concentration and the cell yield was estimated to be 8.5g dry cell wt/g N. For phosphate, optimal growth was observed in 0.1∼1.0mM but a considerable variation in pH was resulted. The addition of Tris at 5mM or 7mM could stabilize the medium pH, but this significantly reduced both growth rate and final cell density, The effect of trace elements and vitamins was negligible. Optimal temperature and initial pH were $20^{\circ}C$ and 8. When the intensity of incident light was varied in the range of 400∼2100 lux, the growth rate increased from 10mL to 70mL, the final cell density decreased although the initial growth rate did not change. Optimal agitation speed was 100rpm when working volume was 30mL. With optimal conditions, the maximum specific growth rate obtained was 0.021hr-1 and the final cell density was 1.1g/L.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.3 no.2
• /
• pp.91-93
• /
• 1978

A methodology which can be employed to obtain an optimal preventive maintenance policy that maximizes the total machine running time over the specified working period is proposed. A system considered is comprised of m machines and r

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.1
• /
• pp.53-61
• /
• 1997

The performance characteristics of magnetic fluid seals are studied numerically as a function of working gap, pole width, angle of pole sharpening, and shaft speed. The temperature distribution of a magnetic fluid seal with multiple tooth is investigated as a function of the contact fraction of magnetic fluids at the periphery of pole tooth using a finite element method. The most significant design parameter of a magnetic fluid seal is the working gap between the pole pieces and the rotating shaft. The result shows that with increasing the working gap, the friction torque decreases radically. The practical working gap for the pole pieces with triangular tooth zone profile is 0.2-0.4mm. The FEM results indicate that the optimal filling of a magnetic fluid between the pole pieces and the shaft is very important due to the accumulations of nonuniform friction heating within the pole pieces, which may interfere the magnetic circuit flow.

• Progress in Superconductivity and Cryogenics
• /
• v.14 no.3
• /
• pp.48-52
• /
• 2012

This paper describes experimental study on the orientation dependence of GM-type pulse tube refrigerator with helium and neon as working gas. A pulse tube refrigerator generates refrigeration work with gas expansion by gas displacer in the pulse tube. The pulse tube is only filled with working gas and there exists secondary flow due to large temperature difference between cold-end and warm-end. The stability of secondary flow is affected by orientation of cold-head and thus cooling performance is deteriorated by gas mixing due to secondary flow. In this study, a single stage GM-type pulse tube with orifice valve as a phase control device is fabricated and tested. The fabricated pulse tube refrigerator is tested with two different working gases of helium and neon. First, optimal valve opening and operating frequency are determined with experimental results of no-load test. And then, the variation of no-load temperature as orientation angle of cold-head is measured for two different working gases. Effect of orientation dependence of cold-head as working gas is discussed with experimental results.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.1
• /
• pp.225-229
• /
• 1990

As a basic study of optimal design conditions of refrigeration systems, the reversed carnot cycle, including heat transfer processes through the finite temperature differences between heat sources and the working fluids, is analyzed with the capacity of heat exchanger as a design parameter. When the temperatures of heat sources and the input work are fixed as constants, the optimal design condition is obtained as an optimum ratio of capacities of heat exchangers, which is exactly unity when the exergy output and effectiveness are maximum. In addition, the optimum ratio is slightly increased from unity as the irreversibility of the cycle increases.

• Journal of the military operations research society of Korea
• /
• v.16 no.2
• /
• pp.83-95
• /
• 1990

This paper addresses the problem of determining the optimal number of spares for a system consisting of multi-item parts. In commercial sector, the cost minimization is mainly considered as an objective functions in most inventory models. However, in the military inventory systems, it is more stressed on maximizing the system availability than minimizing the system cost because the field commander always wants the system to be in perfect working condition to prepare against an emergence case. In this point of view, this paper develops an inventory model which decides the optimal number of spares by minimizing units short and simultaneously achieving a certain level of system availability. Solution algorithms are derived using the generalized Lagrange multiplier approach and marginal analysis approach. Sample data and output results are provided and sensitivity analysis is performed as the level of system availability changes in order to decide the optimal number of spares and availability in terms of economic sense.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.199-200
• /
• 2023

This paper presents a study on the selection of optimal mix proportions for producing lightweight pre-foam concrete as a substitute for Autoclaved Lightweight Concrete (ALC) without the accelerated curing. The study was conducted using a rapid hardening binder made from by-products of the steel industry as the primary raw material. The experimental results established the optimal mix proportions, which included retarder content, water/binder ratio, foam content, and fiber inclusion amount, for the production of lightweight foam concrete. The optimal mix proportion was determined to have a retarder content at the minimum amount required to secure the working time, W/B of 35%, a foam content limited to 65% or less, and a fiber inclusion amount of 0.05% or less.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.3
• /
• pp.360-366
• /
• 2018

In shipyards hull forming is performed by the line heating method using a gas torch and by cold treatment using a roll-press. However, this forming process has some issues, such as difficulties in controlling and accurately estimating the amount of the heat input, as well as a harsh working environment due to exposure to loud noises and air pollution. The induction heating method, which is introduced in this paper, exhibits good control and allows for the estimation of precise heat input. Also, workers can carry out the induction heating in a comfortable working environment. In this research, the induction heating simulation, which consists of electro-magnetic, heat transfer and thermal elasto-plastic analysis, was developed and modified through induction heating experiments. Finally, the effective heating coil was designed for the automatic hull forming system based on the results of induction heating simulation. For the purposes of a future study, if an algorithm to obtain optimal working conditions is developed, automatic systems for hull forming can then be constructed.

• The Journal of Korea Robotics Society
• /
• v.6 no.3
• /
• pp.255-262
• /
• 2011

Many intelligent robots have to be given environmental information to perform tasks. In this paper an intelligent robot, that is, a cleaning robot used a sensor fusing method of two sensors: LRF and StarGazer, and then was able to obtain the information. Throughout wall following using laser displacement sensor, LRF, the working area is built during the robot turn one cycle around the area. After the process of wall following, a path planning which is able to execute the work effectively is established using flow network algorithm. This paper describes an algorithm for minimal turning complete coverage path planning for intelligent robots. This algorithm divides the whole working area by cellular decomposition, and then provides the path planning among the cells employing flow networks. It also provides specific path planning inside each cell guaranteeing the minimal turning of the robots. The proposed algorithm is applied to two different working areas, and verified that it is an optimal path planning method.