• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.23 no.2
• /
• pp.65-92
• /
• 2019

We survey a recently developed immersed finite element method (IFEM) for the interface problems. The IFEM uses structured grids such as uniform grids, even if the interface is a smooth curve. Instead of fitting the curved interface, the bases are modified so that they satisfy the jump conditions along the interface. The early versions of IFEM [1, 2] were suboptimal in convergence order [3]. Later, the consistency terms were added to the bilinear forms [4, 5], thus the scheme became optimal and the error estimates were proven. For elasticity problems with interfaces, we modify the Crouzeix-Raviart based element to satisfy the traction conditions along the interface [6], but the consistency terms are not needed. To satisfy the Korn's inequality, we add the stabilizing terms to the bilinear form. The optimal error estimate was shown for a triangular grid. Lastly, we describe the multigrid algorithms for the discretized system arising from IFEM. The prolongation operators are designed so that the prolongated function satisfy the flux continuity condition along the interface. The W-cycle convergence was proved, and the number of V-cycle is independent of the mesh size.

• Communications for Statistical Applications and Methods
• /
• v.12 no.1
• /
• pp.1-9
• /
• 2005

Burn-in is an engineering method which is used to eliminate early failures of products or systems after they have been produced. Recently, various models for determining optimal burn-in times have been developed, where some preventive maintenance policies were considered together with burn-in problem. In this paper, a survey of recent research in burn-in is undertaken.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2010.10a
• /
• pp.171-174
• /
• 2010

• The Korean Journal of Ecology
• /
• v.8 no.3
• /
• pp.147-152
• /
• 1985

The forest vegetation of natural reserve area (175ha) at north-eastern slope of Solibong (537m), Gwangneung, was studied by plant sociological method and two dimensional ordination technique. In the area dominated by Carpinus laxiflora, from the lower site to peak of Solibong, a zonal distribution of C. laxiflora-Quercus mongolic forest, C. laxiflora-C. cordata forest, C. laxiflora-Q. serrata forest, C. laxiflora forest and C. laxiflora-Rhododendron schlippenbachii forest were recognized by the plant sociological survey. It is seem that the optimal range of Carpinus laxiflora forest occur in mesic-warm site by two dimensiional ordination with thermal condition and soil moisture condition. The optimal range (over 100 in importance value) was the range of 76~89。C.month in warmth index and 18~45% in soil water content.

• Journal of the Korean Home Economics Association
• /
• v.34 no.4
• /
• pp.1-19
• /
• 1996

The purpose of this study is to clarify the tendency of impulse buying behavior and the consumer psychological characteristic factors which arouse impulse purchase and the difference in exploratory behavior according to the degree of impulse buying behaviors. For this purpose existing studies on impulse buying behaviors, consumer stimulation levels and exploratory behaviors were theoretically reviewed. And field survey was carried out for this study; 353 women impulse consumers were selected by convenience sampling method. The summarized main results of this study are as follows; 1) In relative perspectives, the consumers who has high degree of impulse buying behavior was favor of sensory buying behavior but, was lack of planned and rational buying behaviro. 2) The optimal stimulation level of high-impulse consumers is higher than that of low-impulse consumers. Especially, optimal stimulation level of impulse consumers is significantly higher than their life-style stimulation level. This means that impulse consumers are consider to a stimulation seeker. 3) The high-impulse consumers have high exploration through shopping, high information seeking behavior, high interpersonal communication level, high risk taking behavior and particulary high sensory exploratory patterns in purchase exploratory behaviors than that of low-impulse consumers.

• Journal of Forest and Environmental Science
• /
• v.35 no.3
• /
• pp.181-188
• /
• 2019

This study was performed to construct tree species classification map according to three information types (spectral information, texture information, and spectral and texture information) by altitude (30 m, 60 m, 90 m) using the unmanned aerial vehicle images and the object-based classification method, and to evaluate the concordance rate through field survey data. The object-based, optimal weighted values by altitude were 176 for 30 m images, 111 for 60 m images, and 108 for 90 m images in the case of Scale while 0.4/0.6, 0.5/0.5, in the case of the shape/color and compactness/smoothness respectively regardless of the altitude. The overall accuracy according to the type of information by altitude, the information on spectral and texture information was about 88% in the case of 30 m and the spectral information was about 98% and about 86% in the case of 60 m and 90 m respectively showing the highest rates. The concordance rate with the field survey data per tree species was the highest with about 92% in the case of Pinus densiflora at 30 m, about 100% in the case of Prunus sargentii Rehder tree at 60 m, and about 89% in the case of Robinia pseudoacacia L. at 90 m.

• Ocean and Polar Research
• /
• v.35 no.4
• /
• pp.395-405
• /
• 2013

The aim of this study is to suggest an optimal survey method for coastal habitat monitoring around Weno Island in Chuuk Atoll, Federated States of Micronesia (FSM). This study was carried out to compare and analyze differences between in situ survey (PHOTS) and high spatial satellite imagery (Worldview-2) with regard to the coastal habitat distribution patterns of Weno Island. The in situ field data showed the following coverage of habitat types: sand 42.4%, seagrass 26.1%, algae 14.9%, rubble 8.9%, hard coral 3.5%, soft coral 2.6%, dead coral 1.5%, others 0.1%. The satellite imagery showed the following coverage of habitat types: sand 26.5%, seagrass 23.3%, sand + seagrass 12.3%, coral 18.1%, rubble 19.0%, rock 0.8% (Accuracy 65.2%). According to the visual interpretation of the habitat map by in situ survey, seagrass, sand, coral and rubble distribution were misaligned compared with the satellite imagery. While, the satellite imagery appear to be a plausible results to identify habitat types, it could not classify habitat types under one pixel in images, which in turn overestimated coral and rubble coverage, underestimated algae and sand. The differences appear to arise primarily because of habitat classification scheme, sampling scale and remote sensing reflectance. The implication of these results is that satellite imagery analysis needs to incorporate in situ survey data to accurately identify habitat. We suggest that satellite imagery must correspond with in situ survey in habitat classification and sampling scale. Subsequently habitat sub-segmentation based on the in situ survey data should be applied to satellite imagery.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.221-228
• /
• 2002

Thickness of concrete lining, voids at the back of lining or shotcrete are very important elements for inspecting the safety of tunnels. Therefore, the inspection of tunnel lining structure means to investigate the inner layer boundaries of the structure. For this purpose, seismic reflection survey is the most desirable method if it works in good conditions. However, the conventional seismic reflection method can not be properly used for investigating thin layers in the lining structure. In other words, to detect the inner boundaries, it is desirable for the wavelength of source to be less than the thickness of each layer and for the receiver to be capable of detecting high frequency(ultrasonic) signals. To this end, new appropriate source and receiver devices should be developed above all for the ultrasonic reflection survey. This paper deals primarily with the development of source and receiver devices which are essential parts of field measuring system. Interests are above all centered in both the radiation pattern, energy, frequency content of the source and the directional sensitivity of the receiver. With these newly devised ones, ultrasonic physical modeling has been performed on 3-D physical model composed of bakelite, water-proof and concrete, The measured seismograms showed a clear separation of wave arrivals reflected from each layer boundary. Furthermore, it is noteworthy that reflection events from the bottom of concrete below water-proof could be also observed. This result demonstrates the usefulness of the both devices that can be applied to benefit the ultrasonic reflection survey. Future research is being focus on dealing with at first an optimal configuration of source and receiver devices well coupled to tunnel wall, and further an efficient data control system of practical use.

• KIEAE Journal
• /
• v.14 no.6
• /
• pp.105-110
• /
• 2014

The basic factors determining the amount of energy used in hospital buildings are weather conditions and building factors. But the real energy consumer is central plant equipment such as boilers and chillers that produce thermal energy for heating and cooling. Inaccurate decision of the primary equipment's size can cause a high initial-cost, an excessive equipment space, a wasted energy by low operation-efficiency and shortening of the machine's life. In this reason, the decision of optimal size for central plant equipment is very important. There are several factors for the decision such as an operation factor, a factor (equipment factor), piping losses and a simultaneous usage factor applied in the sizing process except a basic cooling load. But there is no standard method for applying those factors. Usually, factors are applied individually by an experience or custom of each engineer. In this study, the authors emphasize the meaning and the problem of those factors, examine them by analyzing factors which were applied to actual practices, and propose the recommendation value of safety, load, operation factors and application methods.

• The Korean Journal of Applied Statistics
• /
• v.23 no.3
• /
• pp.533-543
• /
• 2010

Asking sensitive questions by a direct survey method causes non-response bias and response bias. Non-response bias arises from interviewees refusal to respond and response bias arises from giving incorrect responses. To rectify these biases, Warner (1965) introduced a randomized response model which is an alternative survey method for socially undesirable or incriminating behavior questions. The randomized response model is a procedure for collecting the information on sensitive characteristics without exposing the identity of the respondent. Many survey researchers have proposed diverse variants of the Warner randomized response model and applied their model to collect the information of sensitive questions. Using an optimal allocation, we proposed three-stage stratified randomized response technique which is an extension of the Kim and Elam (2005) two-stage stratified randomized response technique. In this study, we showed that the estimator based on the proposed response model is more efficient than Kim and Elam (2005). But by adding one more survey step to the Kim and Elam (2005), our proposed model may have relatively less privacy protection compared to the Kim and Elam (2005) model.