• Steel and Composite Structures
• /
• v.34 no.4
• /
• pp.467-485
• /
• 2020

Genetic Algorithm (GA) is a meta-heuristic algorithm which is capable of providing robust solutions for optimal design of structural components, particularly those one needs considering many design requirements. Hence, it has been successfully used by engineers in the typology optimization of structural members. As a novel approach, this study employs GA in order for conducting a case study with high constraints on the optimum mechanical properties of reinforced concrete (RC) beams under different load combinations. Accordingly, unified optimum sections through a computer program are adopted to solve the continuous beams problem. Genetic Algorithms proved in finding the optimum resolution smoothly and flawlessly particularly in case of handling many complicated constraints like a continuous beam subjected to different loads as moments shear - torsion regarding the curbs of design codes.

• Korean Journal of Medicinal Crop Science
• /
• v.22 no.2
• /
• pp.147-153
• /
• 2014

The Ponciri fructus immaturus (Poncirus trifoliata Rafinesque) has been used in oriental medicine for uterine contraction, stomachache, abdominal distension and cardiovascular diseases. Two main compounds, poncirin and naringin were successfully analyzed by high performance liquid chromatography (HPLC) and carried out method validation according to ICH guideline. A successful resolution and retention times were obtained with a $C_{18}$ reversed phase column, at an $1m{\ell}min^{-1}$ flow rate, with a gradient elution of a mixture of methanol, water and acetonitrile. Poncirin and naringin showed good linearity ($R^2$ > 0.999) in relatively wide concentration ranged. The recovery of each compound was 95.81 ~ 101.48% with R.S.D. values less than 1.0%. The application of ultrasound-assisted extraction was shown to be more efficient in extracting poncirin and naringin from Ponciri fructus immaturus. The predicted optimal poncirin and naringin yield were poncirin 2.15%, naringin 1.65% under an extraction temperature of $40^{\circ}C$, an extraction time of 10 min in a solvent of 70% methanol.

• The Journal of Korea Robotics Society
• /
• v.13 no.1
• /
• pp.26-30
• /
• 2018

Planetary global localization is necessary for long-range rover missions in which communication with command center operator is throttled due to the long distance. There has been number of researches that address this problem by exploiting and matching rover surroundings with global digital elevation maps (DEM). Using conventional methods for matching, however, is challenging due to artifacts in both DEM rendered images, and/or rover 2D images caused by DEM low resolution, rover image illumination variations and small terrain features. In this work, we use train CNN discriminator to match rover 2D image with DEM rendered images using conditional Generative Adversarial Network architecture (cGAN). We then use this discriminator to search an uncertainty bound given by visual odometry (VO) error bound to estimate rover optimal location and orientation. We demonstrate our network capability to learn to translate rover image into DEM simulated image and match them using Devon Island dataset. The experimental results show that our proposed approach achieves ~74% mean average precision.

• Journal of Broadcast Engineering
• /
• v.22 no.3
• /
• pp.401-404
• /
• 2017

The 360 VR video has a format of a stereoscopic shape such as an isometric shape or a cubic shape or a cubic shape. Although these formats have different characteristics, they have in common that the resolution is higher than that of a normal 2D video. Therefore, it takes much longer time to perform coding/decoding on 360 VR video than 2D Video, so parallel processing techniques are essential when it comes to coding 360 VR video. HEVC, the state of art 2D video codec, uses Wavefront Parallel Processing (WPP) technology as a standard for parallelization. This technique is optimized for 2D videos and does not show optimal performance when used in 3D videos. Therefore, a suitable method for WPP is required for 3D video. In this paper, we propose WPP coding/decoding method which improves WPP performance on cube map format 3D video. The experiment was applied to the HEVC reference software HM 12.0. The experimental results show that there is no significant loss of PSNR compared with the existing WPP, and the coding complexity of 15% to 20% is further reduced. The proposed method is expected to be included in the future 3D VR video codecs.

• Journal of Korean Society for Geospatial Information Science
• /
• v.12 no.2 s.29
• /
• pp.43-52
• /
• 2004

This study presents the application of aerial photographs and the Korea Multi-Purpose Satellite, KOMPSAT-1 Electro-Optical Camera(EOC) imagery in detecting change in an urban area that has been rapidly growing. For the study, we used multi-temporal images which were acquired by two different sensors. Image registration and resampling were rallied out before performing change detection in a common reference system with the same spatial resolution. for all of the images. Results from image differencing and image ratioing techniques show that panchromatic aerial photographs and KOMPSAT-1 EOC images collected by different sensors have potential to detect changes of urban features such as building, road and other man-made structure. And the optimal threshold values were suggested in applying image differencing and image ratioing techniques for change detection.

• Journal of the Korean Geographical Society
• /
• v.41 no.2 s.113
• /
• pp.139-149
• /
• 2006

Earlier research works focused on the seasonal patterns and bio-geochemical processes in sand dunes, and the satellite data and aerial photographs have been used only as a backdrop or for the multi-temporal delineation of sand dune area. In order to find the optimal way to extract features' characteristics, Gimnyeong sand dune area was selected as a study site. Field works have been carried out three times to collect ground control points and sand samples for laboratory analyses. The texture of sand dune is classified as fine sand, which has been derived from shell fragments. The sand dune penetrated into the island from northwest to southeast direction. An aerial photograph was re-sampled into one-meter resolution and rectified with software including Erdas Imagine and ENVI. Sub-scenes were chosen as samples for sand dune, urban area and rural area. K-group non-parametric analysis had been done for the geometric and spectral values of enclosed texture patches. Urban areas proved to have significant smaller patches than the others.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.4
• /
• pp.1100-1112
• /
• 1998

In this paper, a novel method of minimizing the phase error is proposed. A DP-PLL system using this method is implemented and its performacnce is investigated, too. The DP-PLL system detects the phase error between reference clock and locally generated system clock. The phase difference is then reported as a PEV(Phase Error Variation), which is propoced from the delayted n-tap rising dege clock circuit with 5ns resolution in the phase detector. The algorithm is used to track the optimal DAC coefficients, which are adjusted from sample to sample in such a way as to minimize the PEV. The proposed method is found to have remarkable good potential for fast and accurate phase error tracking characteristic. The algorithm shows good performance to supress the low frequency jitter.-ending points, we design new basis functions based on the Legendre polynomial and then transform the error signals with them. When applied to synthetic images such as circles, ellipses and etc., the proposed method provides, in overall, outstanding results in respect to the transform coding gain compared with DCT and DST. And in the case when applied to natural images, the proposed method gives better image quality over DCT and comparable results with DST.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.6
• /
• pp.787-795
• /
• 2009

This paper presents a histogram equalization based on the logistic function for enhancing the quality of images. The histogram equalization is a simple and effective spatial processing method that it enhances the quality by adjusting the brightness of image. The logistic function that is a nonlinear transformation function is applied to adaptively enhance the brightness of the image according to its intensity level frequency. We propose a flexible and asymmetrical logistic function by only using the intensity level with maximum frequency and the maximum intensity level in an histogram, and the total number of pixels. The proposed function excludes both the computation load of an exponential function and the heuristic setting of an optimal parameter values in the traditional logistic function. The proposed method has been applied for equalizing many images with a different resolution and histogram distribution. The experimental results show that the proposed method has the superior enhancement performances and the faster equalizing speed compared with the traditional histogram equalization and the adaptively modified histogram equalization, respectively. And the proposed histogram equalization can be used in various multimedia systems in real-time.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.7
• /
• pp.5-16
• /
• 2011

Digital image analysis techniques have been developed and utilized in the field of solid mechanics and fluid mechanics to measure the deformation and velocity of a target object. The deformation measurement systems based on Particle Image Velocimetry (PIV) and Digital Image Correlation (DIC) have been attempted in geotechnical testings (e.g., physical model tests) for observing the deformation of soils. The digital image analysis is influenced by image pattern of test materials, resolution of the used digital camera, target area, image analysis techniques, and analysis conditions. Therefore, optimal analysis conditions should be determined to obtain high quality results on soil deformations. In the present study, various influence factors on the digital image analysis were described and summarized. The optimizing procedure for high accurate results was then proposed. Finally, the applicability of the developed procedure was examined.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.3
• /
• pp.247-257
• /
• 2001

New methods are proposed for printing a full resolution image on a limited output device. The proposed algorithm uses a dot-pattern database that models overlapping phenomena among neighbor printing dots. To solve the problem of dot-overlap, the gray levels of dot-pattern sets were calculated using a circular dot-overlap model and then measured by a spectrometer. Thereafter, in order to improve the visual quality of the color dithering, the contrast sensitivity function of the human visual system was used. As a result, the optimal dot-pattern can be selected from the database. Consequently, the proposed algorithm can produce high quality images while using low-cost color devices.