• ETRI Journal
• /
• v.36 no.5
• /
• pp.808-818
• /
• 2014

To deal with the major challenges of embedded sensor networks, we consider the use of magnetic fields as a means of reliably transferring both information and power to embedded sensors. We focus on a power allocation strategy for an orthogonal frequency-division multiplexing system to maximize the transferred power under the required information capacity and total available power constraints. First, we consider the case of a co-receiver, where information and power can be extracted from the same signal. In this case, we find an optimal power allocation (OPA) and provide the upper bound of achievable transferred power and capacity pairs. However, the exact calculation of the OPA is computationally complex. Thus, we propose a low-complexity power reallocation algorithm. For practical consideration, we consider the case of a separated receiver (where information and power are transferred separately through different resources) and propose two heuristic power allocation algorithms. Through simulations using the Agilent Advanced Design System and Ansoft High Frequency Structure Simulator, we validate the magnetic-inductive channel characteristic. In addition, we show the performances of the proposed algorithms by providing achievable ${\eta}$-C regions.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.7
• /
• pp.2338-2353
• /
• 2015

In this paper, the optimal power allocation algorithm that minimizes the aggregate bit error rate (BER) of the secondary user (SU) in a downlink orthogonal frequency division multiplexing (OFDM) based cognitive radio (CR) system, while subjecting to the interference power constraint and the transmit power constraint, is investigated under the assumption that the instantaneous channel state information (CSI) of the interference links between the secondary transmitter and the primary receiver, and between the primary transmitter and the secondary receiver is perfectly known. Besides, a suboptimal algorithm with less complexity is also proposed. In order to deal with more practical situations, we further assume that only the channel distribution information (CDI) of the interference links is available and propose heuristic power allocation algorithms based on bisection search method to minimize the aggregate BER under the interference outage constraint and the transmit power constraint. Simulation results are presented to verify the effectiveness of the proposed algorithms.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.35-38
• /
• 2003

We propose a switched beamforming to improve the reception performance of VSB system in severe Rayleigh fading channel. The VSB system has only about 3% of known training signal for the receiver in a data field and the reception performance of VSB receiver is degraded significantly when there are near-0 dB ghosts in receiving signal. The switched beamforming forms several beams in different directions and selects only one beam among them. For the selection of a beam with best channel condition for VSB equalizer, we extracted the channel profiles in time domain for all the beams by correlating the PN511 sequence in VSB field sync and selected optimal beam by comparing the channel profiles. The simulation results show that the proposed method improves the reception performance of VSB system in severe Rayleigh channel.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.1
• /
• pp.47-53
• /
• 2012

In cellular geo-location systems, positioning performance is influenced by hearability of receivers. Hearability can be enhanced by using long integration at the receiver. When unknown residual frequency remains in baseband signals, however, the coherent integration loss increases as the residual frequency becomes larger. Consequently, length of coherent integration is determined by the residual frequency. By precise estimation and compensation of the residual frequency, integration length can be enlarged. This paper presents a residual frequency estimator for WiBro geo-location and analyzes its performance in multipath environment. By computer simulation, an optimal receiver structure to enhance the hearability of WiBro geo-location is proposed.

• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.2
• /
• pp.83-87
• /
• 2014

This paper introduces a refined opportunistic interference alignment (OIA) technique that uses minimum mean square error (MMSE) detection at the receivers in multiple-input multiple-output multi-cell uplink networks. In the OIA scheme under consideration, each user performs the optimal transmit beamforming and power control to minimize the level of interference generated to the other-cell base stations, as in the conventional energy-efficient OIA. The result showed that owing to the enhanced receiver structure, the OIA scheme shows much higher sum-rates than those of the conventional OIA with zero-forcing detection for all signal-to-noise ratio regions.

• Journal of Communications and Networks
• /
• v.13 no.5
• /
• pp.511-517
• /
• 2011

The capacity of wireless ad-hoc networks is analyzed for all kinds of information dissemination based on single and multiple packet reception schemes under the physical model. To represent the general information dissemination scheme, we use (n, m, k)-cast model [1] where n, m, and k (k ${\leq}$ m) are the number of nodes, destinations and closest destinations that actually receive packets from the source in each (n, m, k)-cast group, respectively. We first consider point-to-point communication, which implies single packet reception between transmitter-receiver pairs and compute the (n, m, k)-cast communications. Next, the achievable throughput capacity is computed when receiver nodes are endowed with multipacket reception (MPR) capability. We adopt maximum likelihood decoding (MLD) and successive interference cancellation as optimal and suboptimal decoding schemes for MPR. We also demonstrate that physical and protocol models for MPR render the same capacity when we utilize MLD for decoding.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.11
• /
• pp.9-15
• /
• 2004

We propose optimal interference rejection weight for multistage parallel nulling (MPN) partial parallel interference cancellation (PPIC) receiver previously proposed to enhance the performance of V-BLAST for downlink multiple-input multiple-output (MIMO) multicarrier (MC)-code division multiple access (CDMA) systems. MPN-PPIC method proposed in [1] was based on the parallel interference cancellation (PIC) with fixed interference rejection weight obtained experimentally. However, the fixed weight can not be adapted to various systems efficiently, thus we proposed method for the optimal interference rejection weight based on the received signal to interference and noise ratio (SINR), and the performance of the proposed method was evaluated through computer simulation comparing with the previous method. We obtained performance gains of 2.5 dB ~ 5 dB for BER of 10$^{-3}$ .

• The Korean Journal of Health Service Management
• /
• v.11 no.2
• /
• pp.105-115
• /
• 2017

Objectives : The aim of this study was to suggest the optimal cut off for best, very good, good, slightly bad, and bad grades. Methods : The subjects were recruited from 4 areas of South Korea and 487 questionnaires were analyzed. The nominal and continuous self-rated health questions were used to reveal the optimal cut off and the Short Form-12 Health Survey questionnaire (SF-12) was additionally used. Frequency, Pearson's correlation coefficient, and ROC-curve analysis were used; the significance level was <.05. Results : Subjects assigned 15(3.1%), 90(18.5%), 237(48.7%), 130(26.7%), and 15(3.1%) to best, very good, good, slightly bad and bad groups respectively. The self-rated health score was associated with total Component (r=.563, p<.001), Physical Component (r=.520, p<.001) and Mental Component of SF-12 (r=.303, p<.001). The optimal cut off was 80.5, 70.5, 53.5, and 40.5 for best, very good or more, good or more, and under slightly bad respectively and area under curve was 0.898, 0.908, 0.945, and 0.908 accordingly. Conclusions : This study suggests that the self-rated health score and grade could be integrated with the optimal cut off.

• Journal of Communications and Networks
• /
• v.18 no.6
• /
• pp.902-912
• /
• 2016

Recent advances in energy harvesting (EH) technology have motivated the adoption of rechargeable mobile devices for communications. In this paper, we consider a point-to-point (P2P) wireless communication system in which an EH transmitter with a non-ideal rechargeable battery is required to send a given fixed number of bits to the receiver before they expire according to a preset delay constraint. Due to the possible energy loss in the storage process, the harvest-use-and-store (HUS) architecture is adopted. We characterize the properties of the optimal solutions, for additive white Gaussian channels (AWGNs) and then block-fading channels, that maximize the energy efficiency (i.e., battery residual) subject to a given rate requirement. Interestingly, it is shown that the optimal solution has a water-filling interpretation with double thresholds and that both thresholds are monotonic. Based on this, we investigate the optimal double-threshold based allocation policy and devise an algorithm to achieve the solution. Numerical results are provided to validate the theoretical analysis and to compare the optimal solutions with existing schemes.

• The Korean Journal of Applied Statistics
• /
• v.32 no.2
• /
• pp.187-198
• /
• 2019

Extensive literature exists on how to estimate optimal thresholds based on various accuracy measures using receiver operating characteristic (ROC) and cumulative accuracy profile (CAP) curves. This paper now proposes an alternative measure to represented the specific partial area under the ROC and CAP curves. The relationship between ROC and CAP functions is examined using differential equations of the new defined partial area under curves. In addition, the relationship with the optimal thresholds under conditions of various accuracy measures for the ROC and CAP functions is also derived. We assume there are two kinds of distribution functions composing the mixed distribution as various normal distributions before finding the optimal thresholds. Corresponding type 1 and 2 errors are also explored and discussed under various conditions for accuracy measures.