• Journal of Biomedical Engineering Research
• /
• v.25 no.6
• /
• pp.531-536
• /
• 2004

In fracture treatment with external fixators, the inter-fragmentary movements at the fracture site affect the fracture healing process, and these movements are highly related to the stiffness of external fixation systems. Therefore, in order to provide the optimal fracture healing at the fracture site, it is essential to understand the relationship between the stiffness and the system configurations in external fixation system. In this study we investigated the influences of system configuration parameters on the stiffness in the finite element analysis of an external fixation system of a long bone. The system alignment, the geometric and the material non-linearity of the pin, the joint stiffness and the callus formation were considered in the finite element model. In the first, the system stiffness of the developed finite element model was compared with the experiment data for model validation. The consideration of the joint stiffness and nonlinearity of the model improved the system stiffness results. The joint stiffness, the non-alignment of the system decreased the system stiffness while the callus formation increased the system stiffness. The present results provided the biomechanical basis of rational guidelines for design improvements of external fixators and pre-op. planning to maximize the system stiffness in fracture surgery.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.1
• /
• pp.103-111
• /
• 2000

Ozonation and advanced oxidation($H_2O_2/O_3$) process were investigated under various experimental conditions to improve the efficiency of biological filter used for the treatment of recycled wastewater from aquaculture. Ammonia removal followed the first-order reaction whose reaction rate constant(k) was $2.0{\times}10^{-2}min^{-1}$ in ozonation. The ammonia removal rate increased according as the bicarbonate alkalinity is increased. About 46% $NH_3$ was oxidized by ozone at 200 mg/L as $CaCO_3$. When alkalinity existed in wastewater, ammonia removal rate by advanced oxidation was very low due to the inhibition effect of bicarbonate. However, when initial pH was adjusted to about 8.2 by 0.1 N KOH, ammonia removal rate was improved higher than that by ozonation. Especially. ammonia removal rate was the highest at $H_2O_2/O_3$ of 0.25 and about 90% of ammonia was removed in 30 min at this ratio as pH was maintained over 9. In the case of wastewater containing ammonia and organic constituents, ammonia removal efficiency by both ozonation and advanced oxidation decreased seriously because organic constituents consumed the oxidant faster than ammonia. In addition the optimal $H_2O_2/O_3$ ratio was changed. Like ammonia removal, DOC(dissolved organic carbon) increased for first 10 min and then decreased slowly because the particulate organic constituents were oxidized rapidly and then produce DOC. Even when the ammonia concentration by twice, oxidation of DOC was not retarded.

• Journal of the Korean Geosynthetics Society
• /
• v.20 no.4
• /
• pp.19-32
• /
• 2021

In this study, evaluation and consideration of domestic/overseas design, construction, and quality control performed by the authors on the deep cement mixing method were performed, and improvements for the development of the DCM method were suggested in the future. As a result of this study, it was found that the cross-sectional area correction for strength is required during the laboratory test of mix proportion, and caution is required because the extrapolation method may lead to different results from the actual one. Applicable design methods should be selected in consideration of both the improvement ratio and the type of improvement during design, and it was confirmed that the allowable compressive strength to which the safety factor was applied refers to the standard value for stability review and not the design parameters. In the case of the stress concentration ratio, rather than applying a conventional value, it was possible to perform economical design by calculating the experimental and theoretical stress concentration ratio reflecting the design conditions. In the case where pre-boring is expected during construction, if the increased water content is not large compared to the original, there were cases where a major problem did not occur even if the result that did not consider the increase in water content was used. In addition, it was confirmed that when the ratio of the top treatment length to the improved length is high, a small amount of design cement contents per unit length can be injected during construction. In the case of quality control, it was evaluated that D/4~2D/4 for single-axis and D/4 point for multi-axis were optimal for coring of grouting mixtures. As an item for quality control, it is judged that the standard that considers the TCR along with the unconfined compressive strength of grouting mixtures is more suitable for the domestic situation.

• Clean Technology
• /
• v.16 no.1
• /
• pp.51-58
• /
• 2010

Methane was produced from the anaerobic digestion of marine macro-algae. Elemental analysis was first performed to estimate the theoretical methane production of three macro-algae (Undaria pinnatifida, Laminaria japonica, Hizikia fusiformis). Three algae were found to contain C 34 ~ 36%, H 5%, O 37 ~ 43%, N 2 ~ 4%, S 0.4 ~ 0.7%, and ash 14~21%, and the theoretical methane content was in the range of 56 ~ 60%, which can produce 442 ~ 568 mL $CH_4$ per g of volatile solid (VS). Using the biological methane potential (BMP) test, we found that L. japonica resulted in the highest yield of methane (52%). Moreover, various operational conditions, such as algae amount, pH, salinity, particle size, and pre-treatment, were investigated in order to find an optimal condition of anaerobic digestion. At pH 8.0, the autoclaved L. japonica (5g VS/200 mL), when used without washing salt, produced 268.5 mL/g VS which is 65% of the theoretical methane productions. Furthermore, using a CSTR (with the working volume of 7 L out of the total volume of 10 L), we have successfully operated the reactor for 65 days and obtained maximum methane production rate of 1.4 L/day with purity of 70%.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.3
• /
• pp.397-402
• /
• 2013

The pharmacological efficacy of Protaetia (P.) brevitarsis larvae has been described in the Dongui Bogam. It is believed that the larvae are particularly useful for hepatic disorders. However, natural aversion has made it difficult to consume these larvae as food. Thus, we sought to make an eatable form of the larvae by establishing optimal conditions for larvae preparation. Larvae were selectively bred, sterilized, and a powder of larvae generated by freeze-drying. Afterward, the CellTiter $96^{(R)}$ AQueous Non-Radioactive Cell Proliferation Assay (MTS) with the RAW 264.7 cell line was used to validate the safety of the powder as a food ingredient. We determined that oak sawdust sterilized by water vapor for 5 minutes could be used for larvae feed, and a feeding for 3~5 days followed by a fasting for 3 days were optimal conditions for larvae preparation. In addition, sterilization of larvae at $115^{\circ}C$ and $0.9kgf/cm^3$ (to avoid contamination of pathogenic bacteria and fungi) was successfully applied in the production of edible powder from P. brevitarsis. The optimized processes established in our experiments can be used in the industrial production of P. brevitarsis as a food ingredient.

• The Journal of the Korea Contents Association
• /
• v.18 no.5
• /
• pp.191-214
• /
• 2018

This research empirically analyzed the selection factors and the locational selection factors of the medical service facilities according to the gradual increase of the importance of the selection factors and the locational selection factors regarding the establishments of the small- and medium-sized hospitals according to the rapid changes of the socio-economic conditions. By analyzing the priority order according to the levels of the importance of each evaluation item factor through a research related to the selection factors and the locational selection factors of the small- and medium-sized hospitals and by drawing what the important factors that have the influences on the competitiveness of the pre-existent small- and medium-sized hospitals are through the classification of the real estate locational factors and the non-locational factors, the purpose lies in utilizing them as the basic data and materials for the opening strategies of the small- and medium-sized hospitals considering the special, locational characteristics according to the important factors of the selection factors of the small- and medium-sized hospitals, regarding the medical suppliers that have been preparing, for opening the new, small- and medium-sized hospitals. Based on the results of the preceding researches and the researches on the case examples, 28 evaluation factors were arrived at in terms of the level of the medical treatment, the medical services, the accessibilities of the hospitals, the conveniences of the hospitals, and the physical environment. And, regarding the 28 detailed evaluation factors that had been collected, through the interviews with the related experts, the 5 factors of the medical level, the medical service, the expertise of the hospital, the convenience of the hospital, and the physical environment were selected as the upper class evaluation factors. And, according to each upper class, a total of 28 low-part evaluation factors were selected. Regarding the optimal evaluation factors that were selected, the optimal locational factors were selected by carrying out an AHP questionnaire survey investigation with 200 medical experts as the subjects. Regarding the AHP analysis results, similarly with the case examples of the precedent researches, the levels of the importance appeared in the order of the medical level, the medical services, the accessibility of the hospital, the physical environment, and the convenience. And the factors that were related to the facilities of a hospital appeared low. The results of this research can be applied in providing the basis for the decision-makings regarding the selections of the locations of the small- and medium-sized hospitals in the future.

• Journal of Plant Biotechnology
• /
• v.40 no.2
• /
• pp.79-87
• /
• 2013

The aim of this study was to establish plant regeneration from leaf explants of Sedum tosaense Makino, which is globally rare and endangered species. The leaf explants of S. tosaense were cultured on the MS medium supplemented with different concentration of BA and NAA for callus induction. Callus induction was showed the highest (100%) on MS medium containing $2.0mg{\cdot}L^{-1}$ BA and $1.0mg{\cdot}L^{-1}$ NAA. The highest number of shoots were regenerated when callus were cultured on MS medium containing $2.0mg{\cdot}L^{-1}$ BA and $1.0mg{\cdot}L^{-1}$ NAA for 5 weeks. The axillary bud were cultured on the MS media supplemented with combination of BA and NAA for in vitro propagation. The highest number of adventitious shoot (7.9 per explants) formed at $1.0mg{\cdot}L^{-1}$ NAA and $2.0mg{\cdot}L^{-1}$ BA. For rooting, MS medium supplemented with or without $2.0g{\cdot}L^{-1}$ activated charcoal was tested. The optimal results were observed using MS medium supplemented with $2.0g{\cdot}L^{-1}$ activated charcoal, on which 85.7 (No. of root), 4.6 cm (length of root). 1,200 ppm $CO_2$ and 350 ppm $CO_2$ were supplied for make certain the effects of $CO_2$ on pre-acclimatization by photoautotrophic culture. 1,200 ppm $CO_2$ treatment was established higher than 350 ppm $CO_2$ treatment. Soil acclimatization of in vitro plantlets was the best in mixture soil consisted of peat moss and perlite with 100% survival rate and they showed the maximum growth.

• Journal of Plant Biotechnology
• /
• v.41 no.3
• /
• pp.116-122
• /
• 2014

Total of fifty accessions of Brassica rapa with various morphological characteristics were used for production of double haploid plants though microspore culture in Brassica rapa. Among them, only 30 accessions induced embryos from microspores. The highest efficiency of embryo induction of 1.194 per bud was obtained from IT135449 of turnip type, while 3 accessions of sarson (winter oil) type did not generate embryo. The effect of heat shock periods for embryogenesis was also investigated with 4 accessions (IT135449; Turnip type, IT199710; Chinese cabbage type, IT212886; Pak choi type, IT218043; Summer oil type). The high productions of embryos were observed in IT135449, IT199710 and IT212886 when microspores were pre-cultured to $32^{\circ}C$ for 2 days. In IT218043, high embryogenesis was observed at the 3 days of heat shock treatment. The optimal condition of shoot regeneration for IT199710 was observed in MS medium supplemented with NAA $0.5mg{\cdot}L^{-1}$ and BAP $1mg{\cdot}L^{-1}$. In contrast, the IT135449 and IT212886 were observed high regeneration frequency in MS medium without plant growth regulators. All the plantlets regenerated from microspore-derived embryos have been successfully transplanted to soil, and bud self-pollinated seeds were produced from doubled haploid plants. This indicated that double-haploid genotype was likely generated naturally during embryogenesis process.

• Journal of Environmental Impact Assessment
• /
• v.29 no.3
• /
• pp.157-181
• /
• 2020

Sediments from rivers, lakes and marine ports serve as end points for pollutants discharged into the water, and at the same time serve as sources of pollutants that are continuously released into the water. Until now, the contaminated sediments have been landfilled or dumped at sea. Landfilling, however, was expensive and dumping at sea was completely banned due to the London Convention. Therefore, this study applied contaminated sedimentation soil of 'Royal Palace Livestock Complex' as soil purification method. Soil remediation methods were applied to pretreatment, composting, soil washing, electrokinetics, and thermal desorption by selecting overseas application cases and domestically applicable application technologies. As a result of surveying the site for pollutant characteristics, Disolved Oxigen (DO), Suspended Solid (SS), Chemical Oxygen Demand (COD), Total Nitrogen (TN), and Total Phosphorus (TP) exceeded the discharged water quality standard, and especially SS, COD, TN, and TP exceeded the standard several tens to several hundred times. Soil showed high concentrations of copper and zinc, which promote the growth of pig feed, and cadmium exceeded 1 standard of Soil Environment Conservation Act. In the pretreatment technology, hydrocyclone was used for particle size separation, and the fine soil was separated by more than 80%. Composting was performed on organic and Total Petroleum Hydrocarbon (TPH) contaminated soils. TPH was treated within the standard of concern, and E. coli was analyzed to be high in organic matter, and the fertilizer specification was satisfied by applying the optimum composting conditions at 70℃, but the organic matter content was lower than the fertilizer specification. As a result of continuous washing test, Cd has 5 levels of residual material in fine soil. Cu and Zn were mostly composed of ion exchange properties (stage 1), carbonates (stage 2), and iron / manganese oxides (stage 3), which facilitate easy separation of contamination. As a result of applying acid dissolution and multi-stage washing step by step, hydrochloric acid, 1.0M, 1: 3, 200rpm, 60min was analyzed as the optimal washing factor. Most of the contaminated sediments were found to satisfy the Soil Environmental Conservation Act's standards. Therefore, as a result of the applicability test of this study, soil with high heavy metal contamination was used as aggregate by applying soil cleaning after pre-treatment. It was possible to verify that it was efficient to use organic and oil-contaminated soil as compost Maturity after exterminating contaminants and E. coli by applying composting.

• Journal of Food Hygiene and Safety
• /
• v.38 no.1
• /
• pp.1-11
• /
• 2023

Skin sanitizers are effective in killing or removing pathogenic microbial contaminants from the skin of food handlers, and the progressive growth of consumer interest in personal hygiene tends to drive product diversification. This review covers the advances in the application of efficacy tests for hand sanitizers to suggest future perspectives to establish an assessment system that is optimized to each product type (gel, liquid, and wipes). Previous research on the in vivo simulative test of actual consumer use has adopted diverse experimental conditions regardless of the product type. This highlights the importance of establishing optimal test protocols specialized for the compositional characteristics of sanitizers through the comparative analysis of test methods. Although the operational conditions of the mechanical actions associated with wiping can affect the efficacy of the removal and/or the inactivation of target microorganisms from the skin's surface, currently there is a lack of standardized use patterns for the exposure of hand sanitizing wipes to skin. Thus, major determinants affecting the results from each step of the overall assessment procedures [pre-treatment - exposure of sanitizers - microbial recovery] should be identified to modify current protocols and develop novel test methods. The ex vivo test, designed to overcome the limited reproducibility of in vivo human trials, is also expected to replicate the environment for the contact of sanitizers targeting skin microorganisms. Recent progress in the area of skin microbiome research revealed distinct microbial characteristics and distribution patterns after the application of sanitizers on hands to establish the test methods with the perspectives on the antimicrobial effects at the community level. The future perspectives presented in this study on the improvement of efficacy test methods for hand sanitizers can also contribute to public health and food safety through the commercialization of effective sanitizer products.