• Journal of Life Science
• /
• v.13 no.4
• /
• pp.492-497
• /
• 2003

This study was carried out to get the basic data for the mycelial growth of Lentinus lepideus in liquid culture. The optimal temperature and initial pH of mycelial growth of Lentinus lepideus were $25^{\circ}C$ and pH 5.5, respectively. The optimal medium was YMG medium. Among the carbon sources tested, glucose was effected to the mycelial growth and optimal glucose concentration was 4% (w/v). As nitrogen sources, malt extract and yeast extract appeared to be favorable and optimal malt extract and yeast extract [ratio (w/w) of 1:1] concentration was 1.5% (w/v).

• Korean Journal of Environmental Biology
• /
• v.19 no.1
• /
• pp.87-92
• /
• 2001

For the biological treatment of industrial wastewater containing high concentration of phenol, isolation and characterization of phenol - degrading bacterium were carried out. A bacterial strain P2 capable of degrading phenol was isolated from contaminated soils by enrichment culture technique and identified as the genus Rhodococcus by morphological, cultural, biochemical characteristics, and Biolog system. The optimal medium composition and cultural conditions for the growth and degradation of phenol by Rhodococcus sp. P2 were 0.1% of (NH$_4$)$_2$SO$_4$, 0.2% of KH$_2$PO$_4$, 0.25% of Na$_2$HPO$_4$ㆍ12$H_2O$, 0.2% of MgSO$_4$ㆍ7$H_2O$, and 0.008% of CaC1$_2$ㆍ2$H_2O$ along with initial pH 8.5 at 3$0^{\circ}C$. Rhodococcus sp. P2 could grow with phenol as the sole carbon source up to 1,800 ppm in batch cultures, but did not grow in medium containing above 2,000 ppm of phenol. When 800 ppm phenol was given in the optimal media, Rhodococcus sp. P2 completely degraded it within 24 h. Meanwhile, 1,800 ppm of phenol was degraded within 9 days. Rhodococcus sp. P2 could utilize toluene, n-hexane, xylene and benzene as sole carbon source .

• Journal of the Korean institute of surface engineering
• /
• v.25 no.4
• /
• pp.189-206
• /
• 1992

The effect of activation and electroless nickel plating conditions on contact properties was investi-gated for selective electroless nickel plating of Si wafers in order to obtain an optimum condition of con-tact hole filling. According to RCA prosess, p-type silicon (100) surface was cleaned out and activated. The effects of temperature, DMAB concentration, time, and strirring were investigated for activation of p-type Si(100) surface. The optimal activation condition was 0.2M HF, 1mM PdCl2, 2mM EDTA,$ 70^{\circ}C$, and 90sec under ultrasonic vibration. In electroless nickel plating, the effect of temperature, DMAB concentra-tion, pH, and plating time were studied. The optimal plating condition found was 0.10M NiSO4.H2O, 0.11M Citrate, pH 6.8, $60^{\circ}C$, 30minutes. The contact resistance of films was comparatively low. It took 30minutes to obtain 1$\mu\textrm{m}$ thick film with 8mM DMAB concentration. The film surface roughness was improved with decreasing temperature and decreasing pH of the plating solution. The best quality of the film was obtained at the condition of temperature $60^{\circ}C$ and pH 6.0. The micro-vickers hardness of film was about 800Hv. Plating rate of nickel on the hole pattern was slower than that of nickel on the line pattern.

• Journal of the East Asian Society of Dietary Life
• /
• v.9 no.2
• /
• pp.195-199
• /
• 1999

The characteristics of protease from squid viscera was investigated by response surface methodology(RSM) programmed with reaction temperature and pH. The optimal temperature and pH for the protease were 41.75$^{\circ}C$ and pH 6.02 respectively. Also its activity was 78.65 unit at the optimal condition and $R^2$ of the model was 0.8461 (P＜0.1). The protease activity was decreased by N $a^{+}$ and increased by $Mg^{2+}$ But $K^{+}$ did not affect the protease. The Km value against casein was determined to be 0.12 mM by Line-weaver-Burk plot.lot.

• Microbiology and Biotechnology Letters
• /
• v.20 no.6
• /
• pp.647-654
• /
• 1992

In order to study the physiological properties of the intestinal bacteria, we isolated the intestinal bacteria of Koreans and tested the enzymatic patterns. Isolated Bifidobacterium sp. Int-57 had the higher activity of $\alpha$-glucosidase, $\beta$-glucosidase, $\alpha$-galactosidase, $\beta$-galactosidase. $\beta$-xylosidase and $\alpha$-arabinofuranosidase than other intestinal microorganisms. The effect of the carbon sources on the production of each enzymes of Bijidobacterium sp. Int-57 was investigated. The most suitable carbon source for the production of $\beta$-glucosidase was maltose, for a-glucosidase cellobiose, for $\alpha$-galactosidase raffinose, for $\beta$-galactosidase lactose, and for $\beta$-xylosidase and $\alpha$-arabinofuranosidase xylose, respectively. In addition, we investigated the optimal conditions and pH stability of each crude enzymes. The optimal condition of a-glucosidase was pH 6.0 and $40^{\circ}C$. that of Jj-glucosidase pH 7.0 and 50oe, that of $\beta$-galactosidase pH 7.0 and $50^{\circ}C$, that of $\beta$-xylosidase pH 6.0 and $40^{\circ}C$ , and that of $\alpha$-arabinofuranosidase pH 5.0 and $50^{\circ}C$. respectively. a-Glucosidase was stable at pH 4.0-9.0. Jj-glucosidase at pH 4.0-7.0. $\beta$-galactosidase at pH 4.0-9.0, $\beta$-xylosidase at pH 4.0-6.0, and /3-arabinofuranosidase at pH 7.0-9.0, respectively.

• Journal of the Korean Ceramic Society
• /
• v.32 no.10
• /
• pp.1123-1130
• /
• 1995

In the preparation of manganese zinc ferrite powders by alcoholic dehydration of citrate/formate solution. The effect of pH change on precipitation was investigated. The pH range for obtaining stable precipitates was studied. The glassy phase was obtained when the pH value of solution is higher than 5, and the formation mechanism of glassy phase was suggested. Below pH 5, the stable precipitates were formed, and the optimal pH was 2. Formation of glassy phase was accounted for the change of surface charge by pH change. The change of surface charge is caused by the interparticular agglomeration. The precipitate was redissolved into the water on the surface of precipitate itself and through the polymerization, it agglomerated. This mechanism is tought to be similar to that of viscous flow.

• Korean Journal of Food Science and Technology
• /
• v.47 no.1
• /
• pp.6-12
• /
• 2015

This study was performed to determine the optimal hydrolysis conditions for the production of hydrolysates, including water-soluble dietary fiber from Chinese cabbage, with commercial enzymes. The optimal pH and temperature for hydrolysis of the hemicellulose fraction were pH 5.0 and $40^{\circ}C$, and optimal enzyme concentrations were 45 units and 21 units for Shearzyme plus and Viscozyme L, respectively. The yields of the hydrolysate including the water-soluble dietary fiber from the hemicellulose fraction by Shearzyme plus and Viscozyme L were 22.64 and 24.73%, respectively, after a 72 h reaction. The molecular weight distribution of alcohol-insoluble fiber was characterized by gel chromatography; degradation of hemicellulose increased with increasing reaction time. Our results indicate that the hemicellulose fraction was degraded to water-soluble dietary fiber by enzymatic hydrolysis, and its hydrolysate could be utilized as new watersoluble food materials.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.5
• /
• pp.944-951
• /
• 2004

The influences of inoculum size, pH, and medium composition on mycelial growth and exopolysaccharides (EPS) production were investigated in shake flasks and in a bioreactor. The optimum inoculum size for both mycelial growth and EPS production was identified to be 10% (v/v) in shake flask cultures. The optimal initial pH for mycelial growth and EPS production in shake flask cultures were found to be 5.0 and 7.0, respectively. However, the optimal pH was 5.0 for both mycelial growth and EPS production in bioreactor cultures where the pH was regulated. The optimal mass ratio of the two major carbon sources, glucose to dextrin, was 1:4. The optimal mass ratio of the two major nitrogen sources, yeast extract to soy tone peptone, was 2:1. When 500 mg $1^{-1}$ of $MnSO_4-5H_2O$ was added to the bioreactor culture, both mycelial growth and EPS production were enhanced by approximately 10%. Under the optimized conditions, a mycelial biomass of 9.85 g $1^{-1}$ and an EPS concentration of 4.92 g $1^{-1}$ were obtained in 4 days.

• Journal of Mushroom
• /
• v.7 no.4
• /
• pp.193-199
• /
• 2009

The culture condition of unrecorded species L. aciculospora, L. boryana and L. raphanica was investigated with recorded species of L. edodes as the control group in order to analyze diversity and examed relations of the species belong to Lentinula. The optimal temperature and media for the mycelial growth of L. aciculospora and L. boryana were $22^{\circ}C$ and PDA, MCM medium. L. raphanica was $28^{\circ}C$ and ME1 medium. Each of L. aciculospora, L. boryana, L. raphanica is pH 6, pH 7, pH 5 in the optimal pH respectvely. The optimal carbon and nitrogen source of L. aciculospora were glucose and malt extract. That of L. boryana was glucose and urea that of L. raphanica was sucrose and potassium nitrate. The optimal vitamin of L. aciculospora was Myo-inositol. That of L. boryana and L. raphanica were Riboflabin.

• Journal of Korean Society of Forest Science
• /
• v.102 no.1
• /
• pp.136-142
• /
• 2013

Optimal condition for pollen germination was suggested as a basic research of flowering physiology in order to identify the characteristics of flowering and seed setting of rare and endangered Forsythia saxatilis Nakai. Pollen samples were collected during flowering time from the end of March to the beginning of April. First, a suitable germination temperature, medium sucrose concentration and germination time were determined for pollen germination and pollen tube elongation in vitro, and then an optimal pH of culture medium. Pollen germination and tube elongation were significantly different among the levels of germination temperature, sucrose concentration and germination time. Interactive effects were observed between germination temperature and time, germination temperature and sucrose concentration, germination time and sucrose concentration. Pollen germination was the highest at $10^{\circ}C$ and increased with the increase of sucrose concentration, whereas it had no relation with germination time. In addition, pollen germination and tube elongation did not increase at more than 15% of sucrose concentration and 24 hours later. Pollen germination was the highest at pH 5 (20.8%) and the lowest at pH 6 (3.8%). In conclusion, $10^{\circ}C$, 15% sucrose and pH 5 were proposed as the optimal condition for pollen germination 24 hours later of pollen culture.