• The Korean Journal of Mycology
• /
• v.39 no.2
• /
• pp.91-98
• /
• 2011

Oudemansiella mucida, an edible and medicinal mushrooms belonging to Tricholomataceae of Basidiomycota, has been known to produce antifungal substances to inhibit the mycelial growth and spore germination of the plant pathogenic fungi. To produce good amount of antifungal substances from culture media, the optimal culture conditions of O. mucida were investigated. The most favorable conditions for the mycelial growth were $25^{\circ}C$ and pH 5 in potato dextrose agar. The most favorable carbon and nitrogen sources promoting mycelial growth were maltose and calcium nitrate, respectively. The optimum C/N ratio was about 20 : 1 in case that 3% glucose was supplemented to the basal medium as a carbon source. The optimal mycelial growth of O. mucida was found in the Hennerberg medium. The crude extract from submerged culture of potato dextrose broth exhibited inhibition of mycelial growth of Colletotrichum acutatum, Botrytis cinerea and Pyricularia oryzae but, fungicidal activity is not good enough to compared with commercially available fungicides tested. Therefore, the antifungal substances extracted from submerged culture of O. mucida might have a potential to be used for biocontrol agent of fungal diseases of plants.

• Journal of Life Science
• /
• v.23 no.3
• /
• pp.368-376
• /
• 2013

The optimal condition for Morus alba cv was an MS culture medium at $27^{\circ}C$ for 20 days. Cheongmoknosang callus showed inhibitory activity against Helicobacter pylori at 1.05 g of wet weight of the cultured callus. The callus formation of Morus alba cv. Cheongmoknosang was influenced by naphthalene acetic acid (NAA), 2,4-dichlorophenoxy acetic acid (2,4-D), 6-benzylaminopurine (BA) and kinetin at concentrations of 2 mg/l. The growth rate of callus was higher than it was when these hormones were mixed with a single hormone. Thus, the optimal condition for direct callogenesis was to incubate with mixture (2,4-D/NAA) of 2 mg/l concentration at $27^{\circ}C$ for 20 days. Moreover, the optimal culture condition of the biomass in the mass production of inhibitory compounds against Helicobacter pylori from Morus alba cv. Cheongmoknosang callus was to incubate in an MS broth (each concentration 1 mg/l of 2,4-D and BA). When Morus alba cv. Cheongmoknosang callus were incubated for 20 days in a bioreactor, Helicobacter pylori inhibition of callus extracts was the highest at a clear zone of 16 mm.

• The Korean Journal of Ecology
• /
• v.25 no.6
• /
• pp.389-393
• /
• 2002

Effects of environmental factors on in vitro pine pollen performance were investigated. Pinus densiflora and P. rigida pollen grains collected at Mt. Kwanak, Korea were used. Three environmental factors, such as pollen storage temperature, pollen culture temperature and nutrient condition in medium, were tested. To determine the storage temperature effects on pollen viability, pine pollen was stored at $-70^{\circ}C$, $-12^{\circ}C$, $4^{\circ}C$ and $22^{\circ}C$. Pollen viability was substantially extended at the storage temperatures of $-12^{\circ}C$ and $4^{\circ}C$ for more than 300 days. To elucidate the culture temperature effects on pine pollen germination and tube growth, pollen grains were cultured at the temperatures from $5^{\circ}C$ to $40^{\circ}C$ at $5^{\circ}C$intervals. The germination rate and tube growth were highest at $25^{\circ}C$ and decreased above $30^{\circ}C$. To investigate boron and sucrose effects on pollen tube growth, the pollen was cultured at different sucrose and boric acid concentrations. Germination rate was optimal in germination medium containing 3 or 5$\%$ sucrose with 0.01 $\%$ boric acid. These results indicate that the pine pollen can be stored for considerable length of time without noticeable loss of viability at storage temperature below or near $0^{\circ}C$. Optimal germination medium conditions were established for pine pollen. Therefore, pine pollen can be used for many biological and environmental monitoring researches.

• Microbiology and Biotechnology Letters
• /
• v.29 no.2
• /
• pp.67-71
• /
• 2001

Isolation and Growth Characteristics of AIkalophilic Bacillus sp. for Removal of Anthraquinone Dye. Kim, Jeong-Mog. School of Environmental Information, Taekyeung College, Kyungsan, 712-850, Korea -Alkalophilic strain degrading and decolorizing anthraquinone dye, Remazol brilliant blue R was isolated from natural system and named as Bacillus sp. ARB!. The optimal temperature and pH of Bacillus sp. ARBI were 35°C and 9.0, respectively. The pH of culture media during the fermentation were changed from 10 and 10.5 of initial values to 9.3 and 9.4 after 40 hrs, respectively. Decolorization efficiency in aerobic shaking culture of Bacillus sp. ARBI was markedly higher than that in standing culture. At the optimal culture condition, decolorization efficiency by the Bacillus sp. ARBl was 93% after 32 hrs batch culture. In the case of batch culture using real dye processing wastewater, dye decolorization efficiency of Bacillus sp. ARBl was 78% after 40 hrs.

• Korean Journal of Medicinal Crop Science
• /
• v.7 no.3
• /
• pp.155-161
• /
• 1999

This study was carried out to develop the propagation system using in vitro induced- microtubers of yams (Dioscorea alata L.). Effects of kinds of media, mineral composition, sucrose concentration (0, 2, 4, 6, 8, 10%), photoperiod (0, 8, 12, 16, 24h), and growth regulators (NAA, IAA, ZR, JA-Me, ABA) on the development of microtubers, roots, and shoots in nodal stem segment cultures of D. alata L. were evaluated. Microtuberization in nodal stem segment occurred on all the media supplemented with growth regulator and sucrose. Among basic media, 1/2MS medium was the best in microtuber induction. NAA was shown to be the most effective among the growth regulators. Optimal NAA concentration was 1mg/l. The microtuberization was the highest at the concentration of 6% sucrose. When the nodal stem segment were cultured under darkness, the tuberization was increased markedly compared to those cultured under light condition. It was also noticeable that the culture in medium with NAA produced only microtubers and roots, but no shoots, in nodal segments. In this study, the optimal medium composition for microtuberization in nodal stem segment was found to be 1/2MS medium supplemented with 1mg/l NAA and 6% sucrose under dark condition at $25^{\circ}C$.

• Journal of Korean Society of Forest Science
• /
• v.99 no.3
• /
• pp.414-422
• /
• 2010

The objective of this study was to find optimal water condition of containerized seedling production of two tropical species for high seedling quality. This study was conducted to investigate photosynthesis, water use efficiency(WUE), Stomatal conductance(gs) and growth performances of containerized seedlings of Eucalyptus pellita and Acacia mangium growing under three different irrigation periods (1 time/1 day, 1 time/2 days and 1 time/3 days). E. pellita showed outstanding photosynthetic capacities at 1time/1day irrigation and A. mangium showed good photosynthetic capacity at all treatments. As irrigation period were shortened, gs of two species increased, while WUE of two species decreased. Root collar diameter and height of two species were the highest at 1 time/1 day irrigation, while the lowest at 1 time/3 days irrigation. As irrigation period were shortened, H/D ratio, biomass and seedling quality index (DQI) of two species increased but T/R ratio of two species showed the opposite tendency. These results showed that 1 time/1 day irrigation is optimal water condition of containerized seedling production of two tropical species and irrigation controlling is very important for growth and seedling quality of containerized seedling.

• Transactions of the Korean hydrogen and new energy society
• /
• v.26 no.6
• /
• pp.532-540
• /
• 2015

Electrochemical alane ($AlH_3$) production process can be provided as a synthesis route which close a reversible cycle. In this study, growth inhibition of dendrite as key issues in this process was investigated. Main cause of dendrite growth was because Al fine powder separated in consumption process of Al electrode was moved to Pd electrode. In an effort to avoid this, use of glass block with uniform holes was the most effective to inhibit the amount of dendrite to that of $AlH_3$. Furthermore, effects of Al electrode (anode) type and electrolyte concentration were investigated and the optimal condition for inhibiting dendrite formation was proposed.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.2
• /
• pp.108-111
• /
• 2011

The semiconducting material of ZnO in II-VI group was well known as its good application for photo electronics, chemical sensors and field effect transistors due to the remarkable optical properties with wide energy band gap and great ionic reactivities. Up to now the growth of a good quality of ZnO film has been issued for better performances. Even though there were many deposition methods for making ZnO films, pulse laser deposition methods have been preferred for high crystalline films. In this report, the ZnO film was also created by pulsed laser deposition technique which also showed high crystalinity. By controlling several factors when deposited, it was investigated that the optimal condition for ZnO film formation. Mainly, oxygen partial pressures and growth temperatures were changed when ZnO films were synthesized and followed the characterization by HRXRD and AFM.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.9
• /
• pp.1253-1259
• /
• 2013

The influences of glucose concentration, initial medium acidity (pH), and temperature on the growth and ethanol production of Saccharomyces cerevisiae NK28, which was isolated from kiwi fruit, were examined in shake flask cultures. The optimal glucose concentration, initial medium pH, and temperature for ethanol production were 200 g/l, pH 6.0, and $35^{\circ}C$, respectively. Under this growth condition, S. cerevisiae NK28 produced $98.9{\pm}5.67$ g/l ethanol in 24 h with a volumetric ethanol production rate of $4.12{\pm}0.24g/l{\cdot}h$. S. cerevisiae NK28 was more tolerant to heat and ethanol than laboratory strain S. cerevisiae BY4742, and its tolerance to ethanol and fermentation inhibitors was comparable to that of an ethanologen, S. cerevisiae D5A.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.1
• /
• pp.6-12
• /
• 2015

Under rate-controlled sintering, furnace power is controlled to maintain a specific specimen contraction rate. This thermal processing method guarantees continuous process with a minimum thermal energy applied over time and makes it possible to control the density of the sintered body precisely. In this study, the rate-controlled sintering is applied to the sintering of $B_4C$ in order to investigate how rate-controlled sintering variables can affect the sintering behavior and/or grain growth behavior of $B_4C$ and how the results can be interpreted using sintering theories to draw an optimal sintering condition of the rate-controlled sintering. Further, the applicability of the rate-controlled sintering into the study for sintering of unknown materials is also considered.