• Asia pacific journal of information systems
• /
• v.16 no.1
• /
• pp.71-84
• /
• 2006

Case-based reasoning (CBR) is a reasoning technique that reuses past cases to find a solution to the new problem. It often shows significant promise for improving effectiveness of complex and unstructured decision making. It has been applied to various problem-solving areas including manufacturing, finance and marketing for the reason. However, the design of appropriate case indexing and retrieval mechanisms to improve the performance of CBR is still a challenging issue. Most of the previous studies on CBR have focused on the similarity function or optimization of case features and their weights. According to some of the prior research, however, finding the optimal k parameter for the k-nearest neighbor (k-NN) is also crucial for improving the performance of the CBR system. In spite of the fact, there have been few attempts to optimize the number of neighbors, especially using artificial intelligence (AI) techniques. In this study, we introduce a genetic algorithm (GA) to optimize the number of neighbors to combine. This study applies the novel approach to Korean stock market. Experimental results show that the GA-optimized k-NN approach outperforms other AI techniques for stock market prediction.

• Journal of Sensor Science and Technology
• /
• v.27 no.4
• /
• pp.269-274
• /
• 2018

High-sensitivity signal-to-noise ratio (SNR) microphones are essentially required for a broad range of automatic speech recognition applications. Piezoelectric microphones have several advantages compared to conventional capacitor microphones including high stiffness and high SNR. In this study, we designed a new piezoelectric membrane structure by using the finite elements method (FEM) and an optimization technique to improve the sensitivity of the transducer, which has a high-quality AlN piezoelectric thin film. The simulation demonstrated that the sensitivity critically depends on the inner radius of the top electrode, the outer radius of the membrane, and the thickness of the piezoelectric film in the microphone. The optimized piezoelectric transducer structure showed a much higher sensitivity than that of the conventional piezoelectric transducer structure. This study provides a visible path to realize micro-scale high-sensitivity piezoelectric microphones that have a simple manufacturing process, wide range of frequency and low DC bias voltage.

• Journal of Industrial Technology
• /
• v.19
• /
• pp.127-133
• /
• 1999

This paper is a research about system identification which optimizes uncertain geothechnical properties from the data measured during geotechnical design and construction. Various numerical optimization algorithms of Simplex method, Powell method, Rosenbrock method and Levenberg-Marquardt method were applied to the excavation problem to determine which method showed the best results with respect to robustness of success in finding an optimal solution to within a certain accuracy and number of function evaluations. From the results of numerical analysis, all of four algorithms are converged to exact solution after satisfying the allowed criteria, and Levenberg-Marquardt's algorithms was identified to be the most efficient method in number of function evaluations. System identification was applied to geotechnical engineering problems, possibly being occurred in field, to verify its applicability : estimation of settlement due to self-weight consolidation in dredged and filled soil. For self-weight consolidational settlement of a dredged soil, a program of evaluating the constitutive relationship of effective stress-void ratio-permeability was developed by using the technique of system identification. Thus, consolidational characteristics of a dredged soil, having a very high initial void ratio, can be evaluated.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.1
• /
• pp.51-57
• /
• 2017

In the present study, the long-pitch roller-chain of a continuous ship unloader is studied. It is the vertical excavating and transporting the cargo has carried in bulk amount. The size of the pitch in the long-pitch roller chain is about 350 mm. The finite element technique is used for the structural safety of the roller chain. The objective of the study is to perform a dynamic analysis of the load at the point of contact with the sprocket of the roller chain, and analyze each point in the stress of the chain's components by using load. From the tooth sprocket optimization analysis, the results show an optimal design. Static structural analysis was safe. Contact analysis results show the greatest stress on the sprocket. By increasing the tooth size, the stress was reduced.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.4
• /
• pp.485-490
• /
• 2003

RP(Rapid Prototyping) has been used in the various industrial applications. This paper presents the optimization techniques fur fabricated 3D model design using RP machine for the medical field. Once the original brain model data are obtained from 2D slices of MRI/CT machine, the data can be modeled as an optimal ellipse. The objective of this study includes optimization of fabrication time and surface roughness using the adaptive slicing method. It can reduce fabrication time without losing surface roughness quality by accumulating the slices with variable thickness. According to the parameter tuning and synthesis of its effect, more suitable parameter values can be obtained by enhanced 3D brain model fabrication. Therefore, accurate 3D brain model fabricated by RP machine can enable a surgeon to perform pre-operation. to make a decision for the operation sequence and to perceive the 3D positions in prototype, before delicate operation of actual surgery.

• Journal of Mechanical Science and Technology
• /
• v.20 no.11
• /
• pp.1898-1913
• /
• 2006

This paper deals with the design of a yaw rate controller based on gain-scheduled H$\infty$ optimal control, which is intended to maintain the lateral stability of a vehicle. Uncertain factors such as vehicle mass and cornering stiffness in the vehicle yaw rate dynamics naturally call for the robustness of the feedback controller and thus H$\infty$ optimization technique is applied to synthesize a controller with guaranteed robust stability and performance against the model uncertainty. In the implementation stage, the feed-forward yaw moment by driver's steer input is estimated by the disturbance observer in order to determine the accurate compensatory moment. Finally, HILS results indicate that the proposed yaw rate controller can satisfactorily improve the lateral stability of an automobile.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.4
• /
• pp.528-538
• /
• 1985

A R-S-S-R three dimensional mechanism is designed for crank-rocker type through the optimization technique. The nonlinear kinematic equation of the mechanism is formulated by adopting the concept of structural error and precision points. Taking this equation as an objective function, the required mechanism is optimally synthesized by the Fletcher-Davidon-Powell's method of optimization techniques. The structural errors due to the various positions of precision points are compared, and the results from the use of two penalty functions suggested respectively by Fiacco-McCormick and by Powell are also compared on their effectiveness. The mobility of the optimally designed mechanism is checked for the possibility of its motion, and when a mechanism is optimally designed, it is strongly suggested that the mobility must be checked on the designed mechanism.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.655-658
• /
• 2012

Optimal net residual dispersion (NRD) and distribution pattern of (SMF) length and residual dispersion per span (RDPS) in optical transmission links with artificial distribution of SMF length and RDPS required to flexibly design of optical links in dispersion management (DM) technique for compensating the distorted 960 Gbps optical signals due to interaction of group velocoty dispersion (GVD) and optical nonlinear effects are induced.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.49 no.8
• /
• pp.451-458
• /
• 2000

The precise speed and position control technique for Brushless DC Motor demands accurate position and speed feedback information. Generally, resolver or absolute encoders are used as speed and positiion sensor. But they increase cost and more problem happens at low speed than high speed specially. Therefore, in this paper, optimal speed observer is proposed for decreasing size and cost of whole system. And also, we consider the error problem about the system modeling and measurement at low speed range as well as high speed. The overall system consists of two parts, a drive and a speed observer. We make use of Least square curve fitting algorithm as speed observer and can overcome low resolution by proposed observer. Also, because of using the signal of hall sensor, robust control is possible in low speed as well as high speed for the change of the parameters of the system and disturbance. To construct observer using the signal of hall sensor, we design the pulse multiplier circuit and the software of microprocessor, AT89CC2051. Finally, the performance of the proposed observer is exemplified by some simulations and experiments.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.2 no.3
• /
• pp.167-173
• /
• 2002

In this paper, we propose an interactive genetic algorithm (IGA) to implement an automated 2D avatar synthesis. The IGA technique is capable of expressing user's personality in the avatar synthesis by using the user's response as a candidate for the fitness value. Our suggested IGA method is applied to creating avatars automatically. Unlike the previous works, we introduce the concepts of 'hidden population', as well as 'primitive avatar' and 'simplified genotype', which are used to overcome the shortcomings of IGA such as human fatigue or reliability, and reasonable rates of convergence with a less number of iterations. The procedure of designing avatar models consists of two steps. The first step is to detect the facial feature points and the second step is to create the subjectively optimal avatars with diversity by embedding user's preference, intuition, emotion, psychological aspects, or a more general term, KANSEI. Finally, the combined processes result in human-friendly avatars in terms of both genetic optimality and interactive GUI with reliability.