• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1999년도 춘계 학술대회논문집
• /
• pp.35-47
• /
• 1999

The development of a parallelized aerodynamic simulation process involving moving bodies is presented. The implementation of this process is demonstrated using a fully systemized Chimera methodology for steady and unsteady problems. This methodology consist of a Chimera hole-cutting, a new cut-paste algorithm for optimal mesh. interface generation and a two-step search method for donor cell identification. It is fully automated and requires minimal user input. All procedures of the Chimera technique are parallelized on the Cray T3E using the MPI library. Two and three-dimensional examples are chosen to demonstate the effectiveness and parallel performance of this procedure.

• 한국컴퓨터정보학회논문지
• /
• 제18권7호
• /
• pp.149-155
• /
• 2013

일반적으로 재료절단 문제는 재료를 절단할 수 있는 패턴을 찾고 선형계획법으로 최적의 패턴 수를 찾는다. 그러나 패턴 수는 일반적으로 지수적으로 증가하기 때문에 사전에 모든 패턴을 고려하는 것은 비현실적인 것으로 알려져 있다. 본 논문은 Suliman의 실현 가능 패턴을 구하는 방법을 적용하여 사전에 패턴을 구하는 방법을 적용하였다. 또한, 실현 가능 패턴들을 대상으로 선형계획법이나 근사 알고리즘을 적용하지 않고 정확한 해를 다항시간으로 얻는 방법을 제안하였다. 제안된 방법은 실현 가능 패턴들 중 모든 요구의 1st 발생 빈도가 손실량 0에 모두 분포하는 경우와 다양한 손실량에 분산되어 분포하는 경우로 구분하여 패턴 수를 분배하는 방법을 적용하였다. 제안된 알고리즘을 2개의 데이터에 적용한 결과 모든 데이터에서 정확한 해를 구하는데 성공하였다.

• Journal of Biosystems Engineering
• /
• 제35권6호
• /
• pp.373-379
• /
• 2010

This study was carried out to develop a belt pick-up type one-row soybean cutter, using physical properties and production conditions of soybeans. The prototype soybean cutter consisted of 4 parts: cutting part, conveying part, collecting part, and travelling part. The prototype soybean cutter was designed to cut soybeans planted with a row spacing of 600 mm, and at a height of 30 mm from the bed bottom using a disk saw. Through various trials with different peripheral velocities of the disk saw and forward speed of the cutter, determined ranges of the peripheral velocity of the disk saw cutting soybeans stems were greater than 18.3 m/s. Spacing between pick-up belts (clearance) was in a range of 60~90 mm so that soybeans could be picked at heights greater than 25 cm, and the size and shape of the pick-up belt were determined the conventional manual harvesting method. The optimal ratio between the forward speed of cutter and the peripheral speed of pick-up belts were from 1 to 1.2 by theoretical analysis. the pick-up belts had a $35^{\circ}$ of tilted angle and $90^{\circ}$ of twisted angle to pick up soybeans safely from the plant input to the lower end of the belts and convey soybeans to the upper end of belts nearby a container. The soybeans at the rear container were dropped down on the soybean row with an interval. The effective field capacity of the prototype soybean cutter was 0.136 ha/h, reducing the working hour by 92% when compared with the manual cutting.

• 대한조선학회논문집
• /
• 제57권6호
• /
• pp.373-380
• /
• 2020

We have developed the hybrid prototype load cell structures. These developed load cell structures may increase the reliability of the load sensing by deriving the load values through the double sensing method through the vertical maximum deflection and bending stress of the simple beams. For this purpose, the structure design was performed so that the load value, the deflection and stress value could be output to the same value through the optimal structure design. The structurally designed dimensions reaffirmed the accuracy of the design through the structural analysis program and the matching of the load value and the deflection value. Based on the designed structural dimension, the prototype form was constructed through laser cutting and production using hot rolled steel materials. The developed prototype load cell structure can be used as good educational material in various subjects such as material mechanics, steel structure design, measurement engineering, and mechatronics engineering. It is also believed that the measurement system ideas can inform the occurrence of errors in the event of a problem, and if a major accident caused by a sensing error is predicted, it will show good utilization to prevent accidents.

• 한국석유지질학회:학술대회논문집
• /
• 한국석유지질학회 1998년도 제5차 학술발표회 발표논문집
• /
• pp.10-14
• /
• 1998

A systematic methodology is developed for the electrofacies determination from wireline log data using multivariate statistical analysis. To consider corresponding contribution of each log and reduce the computational dimension, multivariate logs are transformed into a single variable through principal components analysis. Resultant principal components logs are segmented using the statistical zonation method to enhance the efficiency and quality of the interpreted results. Hierarchical cluster analysis is then used to group the segments into electrofacies. Optimal number of groups is determined on the basis of the ratio of within-group variance to total variance and core data. This technique is applied to the wells in the Korea Continental Shelf. The results of field application demonstrate that the prediction of lithology based on the electrofacies classification matches well to the core and the cutting data with high reliability This methodology for electrofacies classification can be used to define the reservoir characteristics which are helpful to the reservoir management.

• 한국공작기계학회논문집
• /
• 제11권2호
• /
• pp.65-70
• /
• 2002

The rotational performance off machine tool spindle has a direct influence upon the surface finish of the finished workpiece. This running accuracy of the spindle is improved by increasing preload on the bearings, while it results in higher temperature rise and larger thermal deformation. Therefore, finding the optimal preload condition for high speed spindle is very important factors in spindle motion. in spindle motion. In this study, the effect of the preload on the roundness accuracy has been examined at the different cutting conditions. Experiments were carried out to investigate the effects of the bearing preload on the running accuracy of high speed spindle which was supported by two angular contact bearings.

• 한국해양공학회지
• /
• 제26권4호
• /
• pp.8-14
• /
• 2012

Two dimensional nesting is a common problem in industries such as the shipbuilding, automotive, clothing, shoe-making, and furniture industries, in which various parts are cut off from stock or packed in a flat space while minimizing waste or unoccupied space. Nesting is known as an NP-complete problem, which has a solution time proportional to the superpolynomial of the input size. It becomes practically impossible to find an optimal solution using algorithmic methods as the number of shapes to nest increases. Therefore, heuristic methods are commonly used to solve nesting problems. This paper presents an expert system that uses a heuristic search method based on an evaluation function for nesting problems, in which parts and stock are represented by pixels. The system is developed in CLIPS, an expert system shell, and is applied to four different kinds of example problems to verify its applicability in practical problems.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.271-275
• /
• 1995

Chip control is a major problem in automatic machining process, especially in finish operation. Chip breaker is one of the important factors to be determined for the scheme of chip control. As unbroken chips are grown, there deteriorate quality of the surface roughness and process automation can be carried out. In this study, to get rid of chip curling problem while turning internal hole, optimal chip breaker is selected form the experiment. The experiment is planned with Taguchi's method that is based on the orthogonal arrary of design factor. From the respose table, cutting speed, feedrate, depth of cut, and tool geometry are major factors affecting chip formation. Then, optmal chip breaker is selected and this is verified good enough for chip control from the experiment.

• 대한기계학회논문집
• /
• 제19권8호
• /
• pp.1854-1868
• /
• 1995

An effective nesting algorithm has been proposed to allocate the arbitrary shapes on one or several raw sheets by applying the well-known simulated annealing algorithm as the optimization technique. In this approach, both the shapes to be allocated and the raw sheets are represented as the grid-based models. This algorithm can accommodate every possible situations encountered in cutting apparel parts from the raw leather sheets. In other words, the usage of the internal hole of a shape for other small shapes, handling of the irregular boundaries and the interior defects of the raw sheets, and the simultaneous allocation on more than one raw sheets have been tackled on successfully in this study. Several computational experiments are presented to verify the robustness of the proposed algorithm.

• 경영과학
• /
• 제18권2호
• /
• pp.117-124
• /
• 2001

This paper presents a machining parameter selection approach using an evolutionary computation (EC). In order to perform a successful material cutting process, the engineer is to select suitable machining parameters. Until now, it has been mostly done by the handbook look-up or solving optimization equations which is inconvenient when not in handy. The main thrust of the paper is to provide a handy machining parameter selection approach. The EC is applied to rapidly find optimal machining parameters for the user\\`s specific machining conditions. The EC is basically a combination of genetic a1gorithm and microcanonical stochastic simulated annealing method. The approach is described in detail with an application example. The paper concludes with a discussion on the potential of the proposed approach.