• Applied Chemistry for Engineering
• /
• v.8 no.4
• /
• pp.660-666
• /
• 1997

The production of doxorubicin by a mutant of Streptomyces peucetius subsp. caesius was studied. The optimal culture conditions, such as inoculum size and medium composition were established to improve the productivity of doxorubicin. The optimal medium composition was found to be 4% maltose, 0.5% HEPES, 0.02% $K_2HPO_4$, 0.01% $MgSO_4$. As an antiform agent, 0.001% KG(10% Adekanol+10% Silicone) was suitable one among various agents. Culture was carried out in 2.5 L jar-fermenter with different aeration rates of 1.5, 1.0, and 1.5 v/v min. The maximum production of doxorubicin(29 mg/l) was obtained at 1.5 v/v min of aeration rate, and even at 1.0 v/v min, the production of doxorubicin was increased up to 15% compared with that of shake-flask culture.

• Korean Journal of Materials Research
• /
• v.33 no.11
• /
• pp.458-464
• /
• 2023

In order to develop catechin patches for skin regeneration at wound sites, patches with varying concentrations of catechin and chitosan were manufactured. An optimal composition ratio was determined by adjusting the drug release rate and amount, to maximize efficiency. The catechin used in this study was extracted from green tea leaves using a solvent/ultrasonication method, and its characteristics were confirmed through Fourier transform-infrared spectroscopy (FT-IR) and high-performance liquid chromatography (HPLC) analyses. Patches were prepared with different concentrations of catechin and chitosan, and various properties were analyzed using techniques such as FT-IR, water contact angle analysis, and UV-Vis spectroscopy. It was observed that as the chitosan concentration increased, the release of catechin slowed down or almost ceased. A patch manufactured with 1.5 mg/cm² of catechin at a 1 % chitosan concentration exhibited a high initial release rate over 24 h and demonstrated cellular biocompatibility. Consequently, these patches, with tailored release characteristics based on the concentrations of chitosan and catechin, hold promise for use as drug delivery systems in wound healing applications.

• Fisheries and Aquatic Sciences
• /
• v.25 no.2
• /
• pp.76-89
• /
• 2022

The Lophius litulon liver was used as raw material for the extraction of fish oil via various extraction methods. The extraction rate by water extraction, potassium hydroxide (KOH) hydrolysis and protease hydrolysis were compared and the results revealed the protease hydrolysis extraction had a higher extraction rate with good protein-lipid separation as observed by optical microscope. Furthermore, subsequent experiments determined neutrase to be the best hydrolytic enzyme in terms of extraction rate and cost. The extraction conditions of neutrase hydrolysis were optimized by single-factor experiment and response surface analysis, and the optimal extraction rate was 58.40 ± 0.25% with the following conditions: enzyme concentration 2,000 IU/g, extraction time 1.0 h, liquid-solid ratio 1.95:1, extraction temperature 40.5℃ and pH 6.5. The fatty acids composition in fish oil from optimized extraction condition was composed of 19.75% saturated fatty acids and 80.25% unsaturated fatty acids. The content of docosahexaenoic acid (DHA) and eicosapentaenoic acid (EPA) were 8.06% and 1.19%, respectively, with the ratio (6.77:1) surpassed to the recommendation in current researches (5:1). The results in this study suggest protease treatment is an efficient method for high-quality fish oil extraction from Lophius litulon liver with a satisfactory ratio of DHA and EPA.

• Journal of Biosystems Engineering
• /
• v.41 no.1
• /
• pp.34-42
• /
• 2016

Purpose: This study was performed to improve the drying quality and drying rate of ginseng slices by combining microwave and far-infrared drying techniques. Methods: Based on single-factor experiments and analyses, a quadratic regression orthogonal rotation combination design was adopted to study the effects of the moisture content at the conversion point between the microwave and far-infrared techniques, the ginseng slice thickness and the far-infrared drying temperature on the chip drying time, the surface color difference value, the nutritional composition and the surface shrinkage rate index. Results: Compared to the far-infrared drying alone, the combined microwave and far-infrared drying resulted in an increase in the saponin content of the ginseng slices and reductions in the drying time, surface color difference, and shrinkage rate. Conclusions: We established a mathematical model of the relationships between the surface shrinkage rate index and the experimental factors using the multi-objective nonlinear optimization method to determine the optimal parameter combination, which was confirmed to be the following: microwave and far-infrared moisture contents of 65%, a ginseng slice thickness of 1 mm, and a far-infrared drying temperature of $54^{\circ}C$.

• Journal of Life Science
• /
• v.25 no.7
• /
• pp.795-800
• /
• 2015

Oyster is a nutritionally good food ingredient. Also, oyster is used to make source for taste and flavor. This study tried to investigate optimal condition of hydrolysis of oyster and oyster cooking drip for better amino acid content to make good taste and flavor. And then this study characterized hydrolysate of oyster and oyster cooking drip. Enzymes are Acalase, Flavourzyme, Neutrase, and Protamax. The optimal condition for the highest enzyme activity is given by the company. Under the best condition of each enzymes, they react with the homogenized oyster and oyster cooking drip for 0.5, 1.0, 1.5, 2, 4, 6 hr. The degree of oysters’ hydrolysis is 13.2±0.1%. But, in the case of using enzyme, the rate of hydrolysis sharply increased as time went on during 2 hr. After 8 hr, the rate is 36.9~40.5%. Protamax showed 27.4±0.4% of hydrolysis rate in 2 hr. And the degree of oyster cooking drop hydrolysis is 42.7±0.1%. The highest of hydrolysate concentration is 72.1±0.1% using protamax. In the case of oyster, it has a similar tendency of all enzymes. Otherwise, the hydrolysate of oyster cooking drip had a difference among the enzymes. Composition of free amino acid of hydrolysate using protamax was investigated how much time showed highest rate of hydrolysis to find best amino acid composition. Hydrolysis using Protamax during 6 hr is selected for best condition.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.9
• /
• pp.1303-1310
• /
• 2014

A 12 week growth study was carried out to investigate the supplemental effects of dietary garlic powder (GP) on growth, feed utilization and whole body composition changes of fingerling sterlet sturgeon Acipenser ruthenus (averaging weight, 5.5 g). Following a 24-h fasting, 540 fish were randomly distributed to each of 18 tanks (30 fish/tank) under a semi-recirculation freshwater system. The GP of 0.5% (GP0.5), 1% (GP1), 1.5% (GP1.5), 2% (GP2) and 3% (GP3) was added to the control diet (GP0) containing 43% protein and 16% lipid. After the feeding trial, weight gain (WG) of fish fed GP1.5, GP2 and GP3 were significantly higher (p<0.05) than those of fish fed GP0, GP0.5 and GP1. Feed efficiency and specific growth rate (SGR) showed a similar trend to WG. Protein efficiency ratio of fish fed GP1.5, GP2, and GP3 were significantly higher (p<0.05) than those of fish groups fed the other diets. A significant difference (p<0.05) was found in whole body composition (moisture, crude protein, crude lipid, ash, and fiber) of fish at the end of the experiment. Significantly higher (p<0.05) protein and lipid retention efficiencies (PRE and LRE) were also found in GP1.5, GP2, and GP3 groups. Broken-line regression model analysis and second order polynomial regression model analysis relation on the basis of SGR and WG indicated that the dietary optimal GP level could be greater than 1.77% and 1.79%, but less than 2.95% and 3.18% in fingerling sterlet sturgeon. The present study suggested that dietary GP for fingerling sterlet sturgeon could positively affect growth performance and protein retention.

• KSBB Journal
• /
• v.15 no.1
• /
• pp.100-105
• /
• 2000

Optimal medium composition, culture conditions, characteristics of phase variation and activity of insecticidal toxin by Xenorhabdus nematophilus isolated and identified from Korean entomopathogenic nematode Steinernema carpocapsae were examined. Optimal medium composition of this strain was 50-70 g/L yeast extract, 3 g/L $K_{2}HPO_{4}$, 1g/L $NH_{4}H_{2}PO_{4}$, 2g/L ${MgSO}_4$$\cdot$${7H}_{2}O$, 10g/L NaCl and, these, yeast extract was found as a limiting nutrient for cell growth. When Monod equation was applied, maxmum specific growth rate and Monod constant were estimated as 0.13 $hr^{-1}$ and 20g/L, respectively. The pH of culture medium increased up to 8.5-9.5 regardless of initial pH 6-7 as the cells continued to grow. The specific growth rate in a 7 L fermentor was 0.18 $hr^{-1}$, which was enhancement 1.4 fold compared to a flask culture. In case of phase variation, phase I fraction was maintained above 90% at the stationary phase for both flask and fermentor cultures. According to oral toxicity test of Gallena mellonella by Xenorhabdus nematophilus, the addition of cell pellets into feed inhibited normal growth of insect larvae and killed completely then after 20 days cultivation. When culture supernatant of this strain was injected into hemolymph of insect larva, the toxicity was strongest at 24hr cultivation in the early exponential phase and gradually decreased as the culture time proceeded.

• Microbiology and Biotechnology Letters
• /
• v.22 no.2
• /
• pp.197-202
• /
• 1994

Microalga, Spirulina platensis has been cultivated in a pilot scale photo-bioreactor to treat wastewater and to produce high protein feedstocks from swine waste containing medium. 0.31(1/day) of specific growth rate and 0.170 of bioenergeric yield were obtanined from batch cultivation in 30% waster containing medium, compared to 0.71(1/day) and 0.545 from clean culture. An optimal dilution concentration was decided as 20% of working volume, based upon the cell growth and biomass productivity. The removal rate of nitrates in the wastewater was decreased as the adding concentration of wastewater was increased while the decrease of total phosphates was reversed, showing 0.33(1/day) and 0.30(1/day) of rate constants for nitrate removal in 10% addition and for phosphate removal in 30% addition, respectively. The chemical composition and amino acid profile of the biomass were superior to those of commerically available health food product, Spirulina sp.

• Korean Chemical Engineering Research
• /
• v.45 no.3
• /
• pp.249-257
• /
• 2007

The periodic square wave (PSW) model was successfully applied to the optimal design of a batch-storage network. The network structure can cover any type of batch production, distribution and inventory system, including recycle streams. Here we extend the coverage of the PSW model to multitasking semi-continuous processes as well as pure continuous and batch processes. In previous solutions obtained using the PSW model, the feedstock composition and product yield were treated as known constants. This constraint is relaxed in the present work, which treats the feedstock composition and product yield as free variables to be optimized. This modification makes it possible to deal with the pooling problem commonly encountered in oil refinery processes. Despite the greater complexity that arises when the feedstock composition and product yield are free variables, the PSW model still gives analytic lot sizing equations. The ability of the proposed method to determine the optimal plant design is demonstrated through the example of a high density polyethylene (HDPE) plant. Based on the analytical optimality results, we propose a practical process optimality measure that can be used for any kind of process. This measure facilitates direct comparison of the performance of multiple processes, and hence is a useful tool for diagnosing the status of process systems. The result that the cost of a process is proportional to the square root of average flow rate is similar to the well-known six-tenths factor rule in plant design.

• Transactions on Electrical and Electronic Materials
• /
• v.16 no.5
• /
• pp.280-284
• /
• 2015

Among many the oxynitrides, TiNO and AlCrNO, have diverse applications in different technological fields. We prepared TiNO/AlCrNO/Al thin films on aluminum substrates using the method of dc reactive magnetron sputtering. The reactive gas flow, gas mixture, and target potential were applied as the sputtering conditions during the deposition in order to control the chemical composition. The multi-layer films have been prepared in an Ar and O₂+N₂ gas mixture rate. The surface properties were estimated by performing scanning electron microscopy (SEM). At a wavelength range of 0.3~2.5 μm, the exact composition and optical properties of thin films were measured by Auger electron spectroscopy (AES) and Ultraviolet-visible-near infrared (UV-Vis-NIR) spectrophotometry. The optimal absorptance of multi-layer films was exhibited above 95.5% in the visible region of the electromagnetic spectrum, and the reflectance was achieved below 1.89%.